• 한국멀티미디어학회논문지
• /
• 제19권7호
• /
• pp.1154-1158
• /
• 2016

This paper presents a System-On-a-chip for embedded image processing applications that need Gaussian Pyramid structure. The system is fully implemented into Field-Programmable Gate Array (FPGA) based on the prototyping platform. The SoC consists of embedded processor core and a hardware accelerator for Gaussian Pyramid construction. The performance of the implementation is benchmarked against software implementations on different platforms.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3928-3934
• /
• 2010

본 논문에서는 움직임에 의해 흐려지고 잡음으로 훼손된 영상에 대하여 영상전체에 일률적으로 복원처리를 행하는 기존의 적용방법들에서 나타나는 문제점을 해결하고자 영상의 국부적인 특성과 방향성을 고려한 복원방법을 제시한다. 이는 평면영역과 윤곽영역을 적응적으로 처리하기 위하여 윤곽의 방향성을 찾기 위하여 다해상도 신호분석인 Wavelet 계수를 적용하여 처리하는 방법을 제안한다.

• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.803-817
• /
• 2017

Structural health monitoring has increasingly been a focus within the civil engineering research community over the last few decades. With increasing application of sensor networks in large structures and infrastructure systems, effective use and development of robust algorithms to analyze large volumes of data and to extract the desired features has become a challenging problem. In this paper, we grasp some precautions and key points of the signal processing approach, wavelet, establish a relative reliable framework, and analyze three problems that require attention when applying wavelet based damage detection approach. The cases studies how to use optimal scales for extracting mode shapes and modal curvatures in a reinforced concrete beam and how to effectively identify damages using maximum curves of wavelet coefficient differences. Moreover, how to make a recognition based on the wavelet multi-resolution analysis, wavelet packet energy, and fuzzy sets is a meaningful topic that has been addressed in this work. The relative systematic work that compasses algorithms, structures and evaluation paves a way to a framework regarding effective structural health monitoring, orientation, decision and action.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.163-166
• /
• 2003

Laser-Induced Thermal Imaging (LITI) is a laser addressed patterning process and has unique advantages, such as high-resolution patterning with over-all position accuracy of the imaged stripes within 2.5 micrometer and scalability to large-size mother glass. This accuracy is accomplished using real-time error correction and a high -resolution stage control system that includes laser interferometers. Here the new concept of mixed hybrid system which complement the advantages of small molecular and polymeric materials for use as an OLED; our system can realize the easy processing of polymers and high luminance efficiency of recently developed small molecules. LITI process enables to pattern the stripes with excellent thickness uniformity and multi-stacking of various functional layers without using any type of fine metal shadow mask. In this study, we report a full-color hybrid OLED using the multi-layered structure of small molecular/polymeric species.

• 정보처리학회논문지A
• /
• 제10A권2호
• /
• pp.157-164
• /
• 2003

최근 볼륨 그래픽스가 의료 영상의 해석 도구로서 주목을 받아 오고 있다. 볼륨 그래픽스에서는 가시화를 위하여 복셀로 정의된 물체가 필요하다. 이 때문에 기하학적인 방법으로 정의한 다각형 및 곡면을 복셀 기반의 물체로 변환시키는데 이를 복셀화(voxelization)라고 한다. 기하학적인 물체를 복셀화하면 기하학적 물체 데이터를 샘플링 데이터와 함께 단일화된 방법으로 볼륨 렌더링할 수 있다. 본 논문에서는 큐브의 단면을 이용한 복셀화의 한 기법을 제안한다. 그리고 개인용 컴퓨터 환경에서 이 기법을 구현한 후에 단순한 기하학적인 데이터를 이용해서 평가하여 논리적인 타당성을 조사한다. 이 기법은 변환된 복셀로부터 정확한 법선 벡터를 계산할 수 있고 복셀간에 구멍(hole)이 발생하지 않고 다해상도(multi-resolution) 표현이 가능한 특성을 가지고 있다.

• 센서학회지
• /
• 제26권6호
• /
• pp.432-437
• /
• 2017

As 4.0 industry has been developed, research on a self-driving car technology and related parts of an automobile has been highly investigated recently. Particularly, a TAS(Torque Angle Sensor) module on steering wheel system has been considered as a key technology because of its precise angle, torque detection and high speed signal processing. The environmental assessment is generally required on the TAS module to examine high resolution of angle/torque detection. In the case of existing TAS module, angle detection errors has been occurred by back-lash on main and sub gear in addition to complicated structure caused by gears. In this paper, a structure of the TAS module, which minimizes the numbers of components and angle detection errors on the module compared with the existing TAS module, for vehicle steering system based on a Multi-track Encoder has been proposed. Also, angle detection signal processing board, and key technology of the TAS module were fabricated and evaluated. As a result of the experiments, we confirmed an excellent performance of the fabricated signal processing board for angle detection and an applicability of the fabricated angle detection board on the TAS module of vehicles by the environmental assessment an automobile standard.

• 한국측량학회지
• /
• 제26권4호
• /
• pp.407-414
• /
• 2008

본 논문은 항공사진과 위성영상의 서로 다른 해상도를 지닌 이종센서 영상들에 대한 효율적인 특이점 자동 매칭 기법에 대한 알고리즘에 관한 연구이다. 본 연구의 자동 매칭 알고리즘은 매칭 정확도 및 속도를 향상시키기 위해 다양한 영상 처리 방법을 적용하였다. 특이점을 추출하기 위하여 전처리 과정, 필터링, 세선화, 특이점 추출 방법을 사용하였으며, 특이점에 대한 키서술자(Key-descriptor)를 비교하여 매칭의 정확도를 향상시켰다. 특히 본 연구에서 제안된 이종센서간의 정확도 높은 자동 영상 매칭을 위해 센서마다 지닌 기하학적 및 방사학적인 영상의 특징을 활용하였다. 아울러 매칭 속도를 높이기 위해 센서 모델을 이용하여 탐색 영역을 최소화 하고 매칭이 잘못된 특이점을 제거할 수 있는 방법을 제시하고 있다.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.111-117
• /
• 2006

This paper describes the design principles and methods of electronic processor for thermal imager with 320$\times$240 staring array infrared detector. For the detector's nonuniformity correction and excellent image quality, we have designed the multi-point correction method using the defocusing technique of the optics. And to enhance the image of low contrast and improve the detection capability, the new technique of histogram processing has been designed. Through these image processing techniques, we have developed the high quality thermal imager and acquired a satisfactory thermal image. The result of MRTD(Minimum Resolvable Temperature Difference) is $0.1^{\circ}C$ at 4cycles/mard.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.505-508
• /
• 2005

Wavelet scheme can be applied to the various remote sensing problems: conventional multi-resolution image analysis, compression of large image sets, fusion of heterogeneous sensor image and segmentation of features. In this study, we attempted wavelet-based filtering and its analysis. Traditionally, statistical methods and adaptive filter are used to manipulate noises in the image processing procedure. While we tried to filter random noise from optical image and radar image using Discrete Wavelet Transform (DW1) and Stationary Wavelet Transform (SW1) and compared with existing methods such as median filter and adaptive filter. In result, SWT preserved boundaries and reduced noises most effectively. If appropriate thresholds are used, wavelet filtering will be applied to detect road boundaries, buildings, cars and other complex features from high-resolution imagery in an urban environment as well as noise filtering