• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.303-314
• /
• 2004

An artificial neural network (ANN) application is presented for flexural and axial vibration analysis of elastic beams with various support conditions. The first three natural frequencies of beams are obtained using multi layer neural network based back-propagation error learning algorithm. The natural frequencies of beams are calculated for six different boundary conditions via direct solution of governing differential equations of beams and Rayleigh's approximate method. The training of the network has been made using these data only flexural vibration case. The trained neural network, however, had been tested for cantilever beam (C-F), and both end free (F-F) in case the axial vibration, and clamped-clamped (C-C), and Guided-Pinned (G-P) support condition in case the flexural vibrations which were not included in the training set. The results found by using artificial neural network are sufficiently close to the theoretical results. It has been demonstrated that the artificial neural network approach applied in this study is highly successful for the purposes of free vibration analysis of elastic beams.

• 한국산업융합학회 논문집
• /
• 제7권3호
• /
• pp.265-271
• /
• 2004

A light collecting probe named Multi-colored Integrated Receiving Optics (MICRO) is experimentally examined to verify its performance. For these purposes, the time-series signals of MICRO probe is compared with those of electro-static probe and light-guided probe by monitoring, for example. such as OH radical chemiluminescence. CH radical band and droplet Mie scattering In addition, the experiment was conducted by using laminar premixed Bunsen flame, turbulent premixed Bunsen flame and premixed spray flame, respectively. It was confirmed that the performance of MICRO probe was very useful and convenient to obtain the chemiluminescence signals from local regions in turbulent premixed Bunsen flame and premixed spray flame.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.209-215
• /
• 2002

In this paper, we propose a freight and fleet optimization model under CVO environment. The model is a kind of multi commodity network flow model based on Vehicle Routing Problem(VRP) and Vehicle Scheduling Problem(VSP), and considering operations and purposes of CVO. The main purpose of CVO is the freight and fleet management to reduce logistics cost and to Improve in vehicle safety. Thus, the objective of this model is to minimize routing cost of all the vehicle and to find the location of commodities which have origin and destination. We also present some computing test results.

• 교육시설
• /
• 제10권2호
• /
• pp.5-13
• /
• 2003

This paper attempts to verify the possibilities of sharing facilities in adjacent elementary and middle school. To achieve these purposes, the educational theories are reviewed and several schools are surveyed. The outcomes from this study are as follows : (1)It is possible and effective to share some facilities in the adjacent elementary and middle schools. To achieve the successful sharing effects, it is necessary for the schools concerned to collaborate heartfully in managing school facilities and in operating school curriculum. (2)This study recommends some school facilities such as the dinning room and kitchen, multi-purpose auditorium, administrative part and nursing room. (3)It is more effective that the sharing facilities be located in the adjacent zone and two playground and main entrance be detached from the other territorial zone.

• 센서학회지
• /
• 제13권5호
• /
• pp.335-341
• /
• 2004

A light collecting probe named Multi-colored Integrated Receiving Optics (MICRO) is experimentally examined to verify its performance. For these purposes, the time-series signals of MICRO probe is compared with those of electrostatic probe and light-guided probe by monitoring, for example, such as OH radical chemiluminescence, CH radical band and droplet Mie scattering. In addition, the experiment was conducted by using laminar premixed Bunsen flame, turbulent premixed Bunsen flame and premixed spray flame, respectively. It was confirmed that the performance of MICRO probe was very useful and convenient to obtain the chemiluminescence signals from local regions in turbulent premixed Bunsen flame and premixed spray flame.

• 대한음성학회지:말소리
• /
• 제65호
• /
• pp.37-49
• /
• 2008

The purposes of this experiment were to compare and analyze some voice parameters of the hearing impaired male adults and to suggest a basic data on the speech intervention for the hearing impaired. Voice analysis of four sustained vowels(/a/, /i/, /${\partial}$/, /u/, fundamental Sequency(F0), jitter percent, shimmer percent, and Noise to Harmonic Ratio(NHR) was conducted for the deaf young male adults using a sign laguage(N=5, aged 16-20) and the normal hearing young male adults(N=10, aged 18-20) by using MDVP(Multi-Dimensional Voice Program) in CSL. F0, jitter, and shimmer in the deaf group were significantly higher than those in the normal hearing group. The average of F0 was 151 Hz, which was lower than the results of the previous studies, and there were no significant differences among the sustained vowels. In both groups, the values of the voice parameters were stable on the /a/ or /${\partial}$/, those closed to the standard scores.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1530-1539
• /
• 2010

Recent technology advancement related to computer & communication and measuring devices allows system operators to adopt more intelligent monitoring and control systems to their power systems in order to prevent massive system blackout. Among them, wide-area monitoring and control(WAMAC) system based on synchro-phasor technology has been widely applied to power systems for their own purposes. In this paper, the study on the development of load shedding scheme to improve voltage stability in KEPCO system is introduced. Summary of WAMAC technology being developed and applied in the world through extensive literature survey is proposed. And methodology to develop voltage stability index and multi-step load shedding scheme based on synchro-phasor data is also presented.

• Journal of Microbiology and Biotechnology
• /
• 제30권6호
• /
• pp.793-803
• /
• 2020

Adaptive laboratory evolution (ALE) is an evolutionary engineering approach in artificial conditions that improves organisms through the imitation of natural evolution. Due to the development of multi-level omics technologies in recent decades, ALE can be performed for various purposes at the laboratory level. This review delineates the basics of the experimental design of ALE based on several ALE studies of industrial microbial strains and updates current strategies combined with progressed metabolic engineering, in silico modeling and automation to maximize the evolution efficiency. Moreover, the review sheds light on the applicability of ALE as a strain development approach that complies with non-recombinant preferences in various food industries. Overall, recent progress in the utilization of ALE for strain development leading to successful industrialization is discussed.

• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.189-206
• /
• 2008

In several design codes and specifications, simplified formulae and charts are given for determining the effective lengths of frame columns. It is shown that these formulae may yield rather erroneous results in certain cases. This is due to the fact that, the code formulae utilise only local stiffness distributions. In this paper, a simplified procedure for determining approximate values for the buckling loads of braced frames is developed. The procedure utilises a fictitious load analysis of frames and yields errors less than 10%, which may be considered suitable for design purposes. The proposed procedure is applied to several numerical examples and it is shown that all the errors are in the acceptable range.

• Journal of Microbiology and Biotechnology
• /
• 제15권3호
• /
• pp.672-677
• /
• 2005

The standard reference collection of strains for E. coli, the ECOR collection, was analyzed by a genome-based typing method. Seventy-one ECOR strains were subjected to repetitive extragenic palindromic PCR genome fingerprinting with BOX primers (BOX-PCR). Using a similarity value of 0.8 or more after cluster analysis of BOX-PCR fingerprinting patterns to define the same genotypes, we identified 28 genotypes in the ECOR collection. Shannon's entropy-based diversity index was 3.07, and the incident-based coverage estimator indicated potentially 420 genotypes among E. coli populations. Chi-square test of goodness-of-fit showed statistically significant association between the genotypes defined by BOX-PCR fingerprinting and the groups previously defined by multi-locus enzyme electrophoresis. This study suggests that the diversification of E. coli strains in natural populations is actively ongoing, and rep-PCR fingerprinting is a convenient and reliable method to type E. coli strains for the purposes ranging from ecology to quarantine.ine.