• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.349-357
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sales branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Fire Science and Engineering
• /
• v.14 no.4
• /
• pp.1-6
• /
• 2000

With the "Fire Protection Building Plan" of the Building Center of Japan as a sample, actual evacuation plans used for large scaled and multi-storied buildings are analyzed. Sufficient number of samples were classified into 6 categories. For room evacuation, time to pass through the exit was the most critical point for larger spaces and movement time in the room was the key for smaller evacuation object zone and less number of evacuees. Seen from the location of fire breakout point, it was witnessed that the numbers of crowding at the exits of the fire escape staircase are serious for floor level evacuation. For vertical traffic line, it was actually proved that time to fire escaping floor is problem of higher buildings. It was also proved that special evacuation methods are in practical use in many buildings in japan.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sides branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.131-138
• /
• 2009

The similarity between two groups of displaying methods is demonstrated in two ways, analytically and experimentally. A variety of layouts of the integral photography and display devices based on the point light source model is classified and analyzed in terms of projections and common/separate image planes. In particularly, the transformation matrix is found. Simulation experiments based on the image processing were performed. The layouts, analytical formulas, and experimental results show the similarity of both groups for several layouts.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.16-25
• /
• 2009

In the car environment that the first priority is a safety problem, the large vocabulary isolated word recognition system with POI domain is required as the optimal HMI technique. For the telematics terminal with a highly limited processing time and memory capacity, it is impossible to process more than 100,000 words in the terminal by the general speech recognition methods. Therefore, we proposed phoneme recognizer using the phonetic GMM and also PDM Levenshtein distance with multi-layer architecture for the POI recognition of telematics terminal. By the proposed methods, we obtained high performance in the telematics terminal with low speed processing and small memory capacity. we obtained the recognition rate of maximum 94.8% in indoor environment and of maximum 92.4% in the car navigation environments.

• Structural Engineering and Mechanics
• /
• v.81 no.4
• /
• pp.411-428
• /
• 2022

This paper presents the Campbell diagram analysis of the rotordynamic system using the full order model (FOM) and the reduced order model (ROM) techniques to determine the critical speeds, identify the stability and reduce the computational time. Due to the spin-speed-dependent matrices (e.g., centrifugal stiffening matrix), several model order reduction (MOR) techniques may be considered, such as the modal superposition (MS) method and the Krylov subspace-based MOR techniques (e.g., Ritz vector (RV), quasi-static Ritz vector (QSRV), multifrequency quasi-static Ritz vector (MQSRV), multifrequency/ multi-spin-speed quasi-static Ritz vector (MMQSRV) and the combined Ritz vector & modal superposition (RV+MS) methods). The proposed MMQSRV method in this study is extended from the MQSRV method by incorporating the rotational-speed-dependent stiffness matrices into the Krylov subspace during the MOR process. Thus, the objective of this note is to respond to the question of whether to use the MS method or the Krylov subspace-based MOR technique in establishing the Campbell diagram of the shaft-disc-blade assembly systems in three-dimensional (3D) finite element analysis (FEA). The Campbell diagrams produced by the FOM and various MOR methods are presented and discussed thoroughly by computing the norm of relative errors (ER). It is found that the RV and the MS methods are dominant at low and high rotating speeds, respectively. More precisely, as the spinning velocity becomes large, the calculated ER produced by the RV method is significantly increased; in contrast, the ER produced by the MS method is smaller and more consistent. From a computational point of view, the MORs have substantially reduced the time computing considerably compared to the FOM. Additionally, the verification of the 3D FE rotordynamic model is also provided and found to be in close agreement with the existing solutions.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.3
• /
• pp.385-397
• /
• 2018

Objectives: The study was a cross-sectional research to examine dental hygiene students' multi-cultural experiences, emotional intelligence and cultural competency and to understand the correlations among them. Methods: The study was conducted from September $1^{st}$ to October $31^{st}$ 2016, based on the survey of 449 students in the department of dental hygiene at 7 Universities. The questionnaire consisted of 57 questions including general characteristics (n=7), multi-cultural experiences (n=7), emotional intelligence (n=16) and cultural competency (n=27). Results: Each score of students' emotional intelligence and cultural competency is 3.43 and 3.01 respectively in 5-point scale. An analysis of correlations between emotional intelligence and cultural competency shows that the higher the emotional intelligence, the higher the cultural competency (r=0.342). The factors affecting the cultural competency include use of emotions (${\beta}=0.327$, p<0.001), control of emotions (${\beta}=0.254$, p=0.001), frequency of multi-cultural media (${\beta}=0.221$, p<0.001) and experience of multi-cultural class (${\beta}=0.221$, p=0.002). The modified explanatory power in this model is 28.2% (F=10.856, p<0.001). Conclusions: There was a positive correlation between emotional intelligence and cultural competency, and the contacts with multi-culture and experience of class are identified as the affecting factors. Dental hygiene students should acquire theoretical experiences regarding the multi-culture through curriculum or continuous educations and it is necessary to promote such educations in order to develop and apply the programs for the enhancement of emotional intelligence.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.305-316
• /
• 2003

Recently, an iterative algorithm for finding the interior eigenvalues of a definite matrix by CG-type method has been proposed. This method compares to the inverse power method. The given matrices A, and B are assumed to be large and sparse, and SPD( Symmetric Positive Definite) The CG scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for large sparse eigenproblems for smallest eigenvalue. Also, it is very amenable to parallel computations, like the CG method for the linear systems. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. But for parallel computations we need to find an efficient parallel preconditioner. Our candidates we ILU(0) in the wave-front order, ILU(0) in the multi-coloring order, Point-SSOR(Symmetric Successive Overrelaxation), and Multi-Color Block SSOR preconditioner. Wavefront order is a simple way to increase parallelism in the natural order, and Multi-coloring realizes a parallelism of order(N), where N is the order of the matrix. Another choice is the Multi-Color Block SSOR(Symmetric Successive OverRelaxation) preconditioning. Block SSOR is a symmetric preconditioner which is expected to minimize the interprocessor communication due to the blocking. We implemented the results on the CRAY-T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test problem was drawn from the discretizations of partial differential equations by finite difference methods. The results show that for small number of processors Multi-Color ILU(0) has the best performance, while for large number of processors Multi-Color Block SSOR performs the best.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1139-1149
• /
• 2017

Measuring tree's volume is very important input data of various environmental analysis modeling However, It's difficult to use economical and equipment to measure a fragmented small green space in the city. In addition, Trees are sensitive to seasons, so we need new and easier equipment and quantification methods for measuring trees than lidar for high frequency monitoring. In particular, the tree's size in a city affect management costs, ecosystem services, safety, and so need to be managed and informed on the individual tree-based. In this study, we aim to acquire image data with UAV(Unmanned Aerial Vehicle), which can be operated at low cost and frequently, and quickly and easily quantify a single tree using SfM-MVS(Structure from Motion-Multi View Stereo), and we evaluate the impact of reducing number of images on the point density of point clouds generated from SfM-MVS and the quantification of single trees. Also, We used the Watertight model to estimate the volume of a single tree and to shape it into a 3D structure and compare it with the quantification results of 3 different type of 3D models. The results of the analysis show that UAV, SfM-MVS and solid model can quantify and shape a single tree with low cost and high time resolution easily. This study is only for a single tree, Therefore, in order to apply it to a larger scale, it is necessary to follow up research to develop it, such as convergence with various spatial information data, improvement of quantification technique and flight plan for enlarging green space.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.242-252
• /
• 2014

Since July of 2012, the 3D video extension of H.264/AVC has been under development to support the multi-view video plus depth format. In 3D video applications such as multi-view and free-view point applications, synthesized views are generated using coded texture video and coded depth video. Such synthesized views can be distorted by quantization noise and inaccuracy of 3D wrapping positions, thus it is important to improve their quality where possible. To achieve this, the relationship among the depth video, texture video, and synthesized view is investigated herein. Based on this investigation, an edge noise suppression filtering process to preserve the edges of the depth video and a method based on a total variation approach to maximum a posteriori probability estimates for reducing the quantization noise of the coded texture video. The experiment results show that the proposed methods improve the peak signal-to-noise ratio and visual quality of a synthesized view compared to a synthesized view without post processing methods.