• Structural Engineering and Mechanics
• /
• 제83권2호
• /
• pp.135-151
• /
• 2022

The generalized displacement method is a nonlinear solution scheme that follows the equilibrium path of the structure based on the development of the generalized displacement. This method traces the path uniformly with a constant amount of generalized displacement. In this article, we first develop higher-order generalized displacement methods based on multi-point techniques. According to the concept of generalized stiffness, a relation is proposed to adjust the generalized displacement during the path-following. This formulation provides the possibility to change the amount of generalized displacement along the path due to changes in generalized stiffness. We, then, introduce higher-order algorithms of variable generalized displacement method using multi-point methods. Finally, we demonstrate with numerical examples that the presented algorithms, including multi-point generalized displacement methods and multi-point variable generalized displacement methods, are capable of following the equilibrium path. A comparison with the arc length method, generalized displacement method, and multi-point arc-length methods illustrates that the adjustment of generalized displacement significantly reduces the number of steps during the path-following. We also demonstrate that the application of multi-point methods reduces the number of iterations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.99-104
• /
• 2005

For the efficient reliability analysis, Bi-direction two-point approximation(BTPA) method is developed which solves shortcomings of conventional two-point approximation(TPA) methods that generate an approximate surface with low accuracy or sometimes do an unstable approximate surface. The conventional reliability based design optimization(RBDO) methods require high computational cost compared with the deterministic design optimization(DO) methods. To overcome the computational inefficiency of RBDO, the approximate reliability analysis approaches on the TPA surface are proposed. Using these FORM and SORM analysis strategies, multi-point aerodynamic-structure interacted shape design optimizations with uncertainty are performed very efficiently.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.91-100
• /
• 2011

Free viewpoint TV can provide multi-angle view point images for viewer needs. In the real world, But all angle view point images can not be captured by camera. Only a few any angle view point images are captured by each camera. Group of the captured images is called multi-view image. Therefore free viewpoint TV wants to production of virtual sub angle view point images form captured any angle view point images. Interpolation methods are known of this problem general solution. To product interpolated view point image of correct angle need to depth image of multi-view image. Unfortunately, multi-view video including depth image is necessary to develop a new compression encoding technique for storage and transmission because of a huge amount of data. Layered depth image is an efficient representation method of multi-view video data. This method makes a data structure that is synthesis of multi-view color and depth image. This paper proposed enhanced compression method using layered depth image representation and H.264/AVC video coding technology. In experimental results, confirmed high compression performance and good quality reconstructed image.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제24권3호
• /
• pp.243-291
• /
• 2020

In this paper, multi-block generalized backward differentiation methods for numerical solutions of ordinary differential and differential algebraic equations are introduced. This class of linear multi-block methods is implemented as multi-block boundary value methods (MB₂ VMs). The root distribution of the stability polynomial of the new class of methods are determined using the Wiener-Hopf factorization of a matrix polynomial for the purpose of their correct implementation. Numerical tests, showing the potential of such methods for output of multi-block of solutions of the ordinary differential equations in the new approach are also reported herein. The methods which output multi-block of solutions of the ordinary differential equations on application, are unlike the conventional linear multistep methods which output a solution at a point or the conventional boundary value methods and multi-block methods which output only a block of solutions per step. The MB₂ VMs introduced herein is a novel approach at developing very large scale integration methods (VLSIM) in the numerical solution of differential equations.

• 대한임베디드공학회논문지
• /
• 제8권1호
• /
• pp.43-50
• /
• 2013

The narrow dynamic range of most smart phone cameras is severely limited. It usually is narrower than the dynamic range of most scenes. So we proposes a illuminance dynamic range expansion using multi-point knee for smart phone camera. Such as logarithmic functions the proposed method compress the image sensor output signal. Additionally, the proposed method was merged into the gamma that is essential circuit for any cameras. To justifying multi-point knee effectiveness, we configure the control and quality evaluation system for smart phone camera module. Experimental results show that the lost information by cut off and saturated affectively reconstructed in darker and in brighter areas. Finally this methods have advantage to implement without any changing hardware for conventional smart phones.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1256-1261
• /
• 2008

This paper proposes a way to measure the displacement of a multi-point by using a pattern recognition from video signal. Generally in measuring displacement, gab sensor, which is a displacement sensor, is used. However, it is difficult to measure displacement by using a common sensor in places where it is unsuitable to attach a sensor, such as high-temperature areas or radioactive places. In this kind of places, non-contact methods should be used to measure displacement and in this study, images of CCD camera were used. When multi-point is measure by using a pattern recognition, it is possible to measure displacement with a non-contact method. It is simple to install and multi-point displacement measuring device so that it is advantageous to solve problems of spatial constraints.

• 한국멀티미디어학회논문지
• /
• 제21권10호
• /
• pp.1131-1141
• /
• 2018

Motion Estimation which is used to reduce the redundant data plays an important role in video compressions. However, it requires huge computational complexity of the encoder part. And therefore many fast motion estimation methods has been developed to reduce complexity. Multi-view video is obtained by using many cameras at different positions and its complexity increases in proportion to the number of cameras. In this paper, we proposed a fast motion estimation method for multi-view video. The proposed method predicts a search start point by using correlated candidate vectors of the current block. According to the motion size of the start search point, a search start pattern of the current block is decided adaptively. The proposed method proves to be about 2 ~ 5 times faster than existing methods while maintaining similar image quality and bitrates.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.93-98
• /
• 2019

Recently, with the development of the aerospace and automotive industries, the demand for high-melting-point materials has increased. However, high-melting-point materials are difficult to cut through conventional machining methods. Thermally assisted machining (TAM) is a method for improving the machinability by preheating the materials. A laser, the most commonly used device for TAM, has high efficiency through local preheating but is not sufficient for maintaining a high preheating temperature due to rapid cooling. However, the use of multi-heat sources can supplement the disadvantage of a single heat source. The high preheating temperature can be maintained with a wide and deep heat-affected zone (HAZ) by multi-heat sources. The purpose of this study is to analyze the preheating effects of multi-heat sources using laser plasma. Thermal analysis and preheating experiments were carried out. As a result, the high preheating effect of multi-heat sources compared with a single heat source was verified.

• 대한수학회보
• /
• 제53권5호
• /
• pp.1439-1446
• /
• 2016

The execution complexities of the major time memory data tradeoff methods are analyzed in this paper. The multi-target tradeoffs covered are the classical Hellman, distinguished point, and fuzzy rainbow methods, both in their non-perfect and perfect table versions for the latter two methods. We show that their computational complexities are identical to those of the corresponding single-target methods executed under certain matching parameters and conclude that the perfect table fuzzy rainbow tradeoff method is most preferable.

• 대한기계학회논문집B
• /
• 제34권10호
• /
• pp.947-955
• /
• 2010

대부분의 석유 가스전은 탄화수소혼합물과 일반기체 등 저류층 내부 유체의 성분조성에 따라 저류층내 상거동 특성이 매우 민감하게 변화한다. 석유 가스전의 평가와 개발 생산계획을 수립함에 있어, 이러한 상거동에 따른 기체와 액체의 성분비 결정과 석유와 가스의 이상유동 해석을 위한 저류유체의 PVT관계 및 포화물성의 규명은 필수적이다. 이중에서 특히, 포화물성의 계산은 수렴성이 나빠, 이상 유동의 해석적 연구에 있어서 많은 어려움을 초래하는 원인이 되고 있다. 이에 본 연구에서는 포화물성 의 계산에 있어서 수렴도 향상을 위한 새로운 초기값 추정 방법과 근 탐색 알고리듬을 제안하고, 성능비교 등을 통한 수렴도 영향인자에 대한 분석을 시도하였다. 결과적으로, 제안된 방법을 통해 포화물성 해석 수렴성을 개선하였고 GUI 기반의 새로운 다성분 다상거동해석 시뮬레이터의 개발에 적용하였다.