• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1987.12a
• /
• pp.65-71
• /
• 1987

All Korean professional engineer′s great joy Is to welcome the Japanese professional engineers and relevant guests to the 1987 Japan-Korea Professional Engineers Joint Convention organized by the Korean Professional Engineers Association. As there exists an effort of blood, sweat and tear behind a succeeded theatrical stage, so an exquisite devotion with drawing up a master plan, investigation, supervision and etc by engineering firms is soaked through every part of huge construction projects and large unit factory buildings. It is over 14 years that the Engineering Service Promotion Law has been enacted by the Ministry of Science and Technology. In the meantime, the domestic engineering (engineering service) have reached a remarkable higher level while the number of engineering firms participating in overseas market has gradually been increasing. From a small scale of under water investigation to a large scale planning of atomic reactor or petrochemical plant, engineering service business can be said "The Software of Total Industry." Engineering service is what is called a higher business which offers specialized engineering know-how and experience. Engineering service compaines offer Its specialized knowledge and experience to government, industry and commerce. Whether the task is to modernize plant equipment, to design a building or to manage construction, an engineering company will develop and implement the most appropriate and cost effective solution. Clients use the engineering service of firm knowing that the engineer′s professional judgement is not influenced or biased by other commercial affiliations. While benefiting from the diverse experience that professional engineers can apply to a specific problem, government and industry also reduce the need for permanent in-house engineering staff. Engineering firms may be specialized or multi-disciplinary.

• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.64-67
• /
• 2004

Change detection using aerial and satellite images is one of the important research topics in photogrammetry and image interpretation. It is of particular importance especially in the fields of military, political and administrative affairs. When there is a need to detect changes in multi-temporal images, the most efficient methods for change detection and thresholds of change/no change area need to be chosen. Also, the images obtained from the various methods need to be analyzed. To do so, we need a system that can support our decision making process. Therefore, in this paper, we propose the Decision Support System for Change Detection. This system is composed of Data Base, Model Base and Graphic User Interface(GUI). Data base is a compilation of previous change detection results, and Model Base comprise of numerous operations. The data can be input and have the results of change detection analyzed by using GUI. In this paper, we will explain the entire operation of the system and demonstrate the level of its effectiveness.

• Journal of Korean Home Economics Education Association
• /
• v.11 no.2
• /
• pp.13-26
• /
• 1999

The goals of this research are for producing and optimizing the CD-ROM, effective and practical Teaching-Learning method. It consists of Wearing Korean Traditional Costume for the First Grade of Middle School Students in Home Economics Teaching. This research’s summarization is following. First, the multi-media material. CD-ROM making use of Powerpoint. Wearing Korean Traditional Costume, is produced to help the students learn the difficult contents in terms of video and audio. Second, it is introduced the model of Open Education for increasing the efficiency of class. Third, it is developed to proceed the class with the CD-ROM and small group study of place activity. Fourth, it helps students concentrate on the class with proper sound effect whenever the slide films are changed. And it helps to link the web sites related to Korean Traditional Costume. Finally, another kinds of suggestions are following. The effective verification of this software that is tested and applied at the field for a given period will be necessary. And, it is necessary to upgrade for the CD-ROM and the supplementary teaching materials in Korean Traditional Costume education.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.443-453
• /
• 2015

A hybrid safety injection tank (H-SIT) can enhance the capability of an advanced power reactor plus (APR+) during a station black out (SBO) that is accompanied by a severe accident. It may a useful alternative to an electric motor. The operations strategy of the H-SIT has to be investigated to achieve maximum utilization of its function. In this study, the master logic diagram (i.e., an analysis for identifying the differences between an H-SIT and a safety injection pump) and an accident case classification were used to determine the parameters of the H-SIT operation. The conditions that require the use of an H-SIT were determined using a decision-making process. The proper timing for using an H-SIT was also analyzed by using the Multi-dimensional Analysis of Reactor Safety (MARS) 1.3 code (Korea Atomic Energy Research Institute, Daejeon, South Korea). The operation strategy analysis indicates that a H-SIT can mitigate five types of failure: (1) failure of the safety injection pump, (2) failure of the passive auxiliary feedwater system, (3) failure of the depressurization system, (4) failure of the shutdown cooling pump (SCP), and (5) failure of the recirculation system. The results of the MARS code demonstrate that the time allowed for recovery can be extended when using an H-SIT, compared with the same situation in which an H-SIT is not used. Based on the results, the use of an H-SIT is recommended, especially after the pilot-operated safety relief valve (POSRV) is opened.

• Journal of Families and Better Life
• /
• v.20 no.5
• /
• pp.27-35
• /
• 2002

The purpose of this study was to analyze consumer's opinion and preference trend for luxurious apartments. Data were collected from 167 consumers visiting luxurious apartment model houses from Jan. 2000 to Nov. 2000. The findings of this study are as follows. 1) It is revealed that consumers are positive for luxurious apartments because of luxurious interior facilities and finishing materials convenient storage space and closet. It is found that they are willing to purchase the luxurious apartment if affordable. 2) It is revealed that consumers are negative in using imported materials in general. However, consumers are positive in using imported materials for kitchen and bathroom utilities because of better design and function. Also it is found that consumers are willing to purchase domestic materials if price and quality are same as imported one. 3) It is revealed that consumers prefer to have most spacious living room and master bed room which are facing South. They prefer to have built-in furniture in multi-in purpose room, children's bedroom and entrance hall in priority order. It is revealed that consumer want to choose their favorable interior plan and finishing materials among several options recommended by constructor.

• Korean Institute of Interior Design Journal
• /
• v.24 no.2
• /
• pp.142-150
• /
• 2015

The purpose of this study is to analysis the change of rural house type and house plans in Bonghwa province. According to definition of rural area, the scopes of the research of rural houses limited the Bonghwa rural area(1 eup, 9 myeon). The method of study is to compare and analyze about housing situation, structure of house, housing type and construction of house space etc. through the statistical data of Bongwha statistical yearbook, space syntax(convex analysis) and other various data etc. during these 10 years. As a results of the analysis 1) According to Change of family member the supply ratio of detached house is steadily decreasing and changing from a detached house to multi-household house in Bongwha areas. 2) Most of houses structure were using lightweight steel construction because of cost-cutting of construction and easy way to construct etc.. 3) The highest Integration space is living space in rural house plans 4) The highest segregation space is bathroom space of master bed room in rural house plans. Some of bed rooms are classed as segregation space regardless of Integration space 5) Traditional front yard's function is changing from the place with the various functions to the place with the specific functions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.643-650
• /
• 2017

This pap4er analyzes resonance characteristics of a slave motor that is not controlled by load and parameter differences between Dual motors during parallel operation in middle-low speed. Dual SPMSMs(Surface mounted Permanent Magnet Synchronous Motor) connected in parallel to a single inverter controlled by the master and slave control in this paper. Based on the stability analysis of the SPMSM for a variation of torque angle, the 6th nonlinear state equation of the torque angle variation in the SIMM(Single Inverter Multi Motor) structure is derived according to a mathematical model for the dual motors. In general, an analysis of the 6th order nonlinear state equation is complex. Therefore, a resonance frequency generated from the slave motor is found from the characteristic equation of the 2nd order system obtained by linearization and model reduction near steady state operation point. Through simulations and experiments, it is confirmed that the stability analysis of the SPMSMs and state equation models are useful for the variation of the torque angle analyzed in this paper.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.305-311
• /
• 2005

This research presents a three-dimensional modeling technique for a flexible sheet. A relative coordinate formulation is used to represent the kinematics of the sheet. The three-dimensional flexible sheet is modeled by multi-rigid bodies interconnected by out-of-plane joints and plate force elements. A parent node is designated as a master body and is connected to the ground by a floating joint to cover the rigid motion of the flexible sheet in space. Since the in-plane deformation of a sheet such as a paper and a film is relatively small, compared to out-of-plane deformation, only the out-of-plane deformation is accounted for in this research. The recursive formulation has been adopted to solve the equations of motion efficiently. An example is presented to show the validity of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.2
• /
• pp.55-60
• /
• 2002

This paper presents a controller for the multiple DC motors using the CAN(Controller Area Network). The controller has a benefit of reducing the cable connections and making the controller boards compact through the network including expansibility. CAN, among the field buses, is a serial communication methodology which has the physical layer and the data link layer in the ISO's OSI (Open System Interconnect) 7 layered reference model. It provides the user with many powerful features including multi-master functionality and the ability to broadcast / multicast telegrams. When we use a microprocessor chip embedding the CAN function, the system becomes more economical and reliable to react shortly in the data transmission. The controller, we proposed, is composed of two main controllers and a sub controller, which have built with a one-chip microprocessor having CAN function. The sub controller is plugged into the Pentium PC to perform a CAN communication, and connected to the main controllers via the CAN. Main controllers are responsible for controlling two motors respectively. Totally four motors, actuators for the biped robot in our laboratory, are controlled in the experiment. We show that the four motors are controlled properly to actuate the biped robot through the network in real time.