• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.521-528
• /
• 2008

Such conventional maritime communication technologies as radio have short some comings in their transmission quality. It can be overcome by wireless channels provided by satellites such as INMARSAT, which nevertheless suffer from the high costs. In this paper, we propose a novel technology resolving the above problems, featuring in the establishment of maritime communication networks with multi-hop structures. The inter vessel and ship-to- shore networks previously modeled after MANET are remodeled by SANET (Ship Ad Hoc Networks) in the present work. Fan-shaped Search Zone Routing (FSR) protocol also is presented, which utilizes not only static geographical information including the locations of ports and the navigations of courses but also the unique characteristics of ships in terms of mobile nodes. The FSR finds the fan-shaped search zone on which the shortest path is located. The performance of LAR protocol is compared with that of FSR in several ways. First, FSR does not make use of a type of control packets as beaconing data, resulting in a full utilization of the bandwidth of the wireless channels. Second, the delivery rate by the FSR is 100% for the fan-shaped search zone includes at least one route between source and destination nodes on its border line, where as that of LAR has been turned out to be 64%. Third, the optimality of routes searched by the FSR is on a 97% level. Of all, the FSR shows a better performance than LAR by about 50%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.17-26
• /
• 2013

ISO/IEC 29157 originally developed in the Republic of Korea and is based on commercially available PicoCast v1.0. ISO/IEC JTC1 SC6 was registered by the international standard on May 2010. A single platform for a variety of applications and media formats to support development objectives were. ISO/IEC 29157 based wireless networks, ie, Pico-net to master node periodically transmit sync signal is synchronized to the number of slave nodes have the communications structure. Pico-net also supports a variety of network topologies and direct communication between nodes(single-hop communication) and QoS is guaranteed. But Pico-net network structure has the following problems. Loss of communication problems due to mobile nodes, resulting in limitations of node mobility and wireless network operation range of conventional wireless networks operating range less than 1/4 was reduced to the problem. In this paper, a possible solution to the problems mentioned is proposed, using multi-hop communication technology and sync signal transmission technology between nodes.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.167-178
• /
• 2011

As the growth of ubiquitous services, various types of ad hoc networks have emerged. In particular, wireless sensor networks (WSN) and mobile ad hoc networks (MANET) are widely known ad hoc networks, but there are also other kinds of wireless ad hoc networks in which the characteristics of the aforementioned two network types are mixed together. This paper proposes a variant of the Low Energy Adaptive Cluster Hierarchy (LEACH) routing protocol modified to be suitable in such a combined network environment. That is, the proposed routing protocol provides node detection and route discovery/maintenance in a network with a large number of mobile sensor nodes, while preserving node mobility, network connectivity, and energy efficiency. The proposed routing protocol is implemented with a multi-hop multi-path algorithm, a topology reconfiguration technique using node movement estimation and vibration sensors, and an efficient path selection and data transmission technique for a great many moving nodes. In the experiments, the performance of the proposed protocol is demonstrated by comparing it to the conventional LEACH protocol.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1297-1307
• /
• 2013

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or disseminate useful traffic information to othet vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collision at the link layer due to an excessive number of broadcast packets. To solve broadcast storm problem, we propose an RPB-MACn-based LV-CAST that is a vehicular broadcast algorithm for disseminating safety-related emergency message. The proposed LV-CAST identifies the last node within transmission range by computing the distance extending on 1 hop from the sending node of an emergency message to the next node of receiving node of the emergency message, and the last node only re-broadcasts the emergency message. The performance of LV-CAST is evaluated through simulation and compared with other message dissemination algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.29-34
• /
• 2008

In this paper, we proposed a system protocol for detecting injurious insect to support energy saving transmission in wireless bio sensor networks. The main ideas and features of the system are as follows. First, the route establishment method which is based on the energy efficiency and stability by using time-division tree structure. Second, multi-hop direction-based data gatering structure. In this structure, the selected fading method is used to transmit packet via the established tree structure for supporting power saving and route lifetime efficiently. Finally, we can get the node power saving and reduce transmission delay, thus network lifetime and efficiency are improved. The performance evaluation of the proposed protocol is via OPNET(Optimized Network Engineering Tool).

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.696-704
• /
• 2005

Flooding is usually utilized to find a multi hop route toward the destination which is not within transmission range in Ad Hoc networks. However, existing flooding schemes deteriorate the network performance because of periodic message exchanges, frequent occurrence of collisions, and redundant packet transmission. To resolve this, a flooding scheme using on demand cluster formation is proposed in this paper. The scheme employs ongoing Packets for constructing a cluster architecture as the existing on demand clustering scheme. Unlike to the existing on demand clustering scheme, the scheme makes use of unicast packet transmission to reduce the number of collisions and to find the flooding candidates easily. As a result, the proposed scheme yields fewer flooding nodes than other schemes. Simulation results proved that the proposed scheme reduces the number of transmissions and collisions than those of two other schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1608-1615
• /
• 2010

In this paper, we proposed the method called "DoublePico"(Double Piconet) forovercoming low data transmission rate in a scatternet. This needs a new Ad-hoc network topology to transmit with high rate. Every node performs the function of the relay station. DoublePico has two bluetooth devices that should form two different poconets; every node can make a link between two different piconets. Two different piconets are linked in one node by the link with two bluetooth divices thereby forming the Ad-Hoc network. In this paper, we shows the method of DoublePico which supports about 457kbps of the maximum data transmission rate. This method supports a higher data transmission rate than the traditional bluetooth's Ad-Hoc topology by using analysis and comparison of existing algorithm of bluetooth specification and simulation results. Specifically, this paper focuses on the impact of intererence on the PER (Packet Error Rate), throughput performance, and the throughput improvement with SAW(Stop and Wait)-ARQ scheme in DoublePico.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.443-450
• /
• 2011

Recently, various transmission techniques for communication and broadcasting systems have been developed to meet the dramatically increasing requirement of consumers. Because UWB (Ultra-Wideband) is a wireless communication technique that supports high data rate with low power, it can satisfy the requirement and can be applied to various wireless communication services. The multi-band orthogonal frequency division multiplexing (MB-OFDM) system, one of UWB system, is the wireless communication system that satisfies the transmission characteristic for UWB and so it can be used for various wireless communication services. In this paper, we propose a scheme that uses hierarchical modulation which is applied in digital video broadcasting system at the source and adaptive modulation based on the channel quality at the relays. The simulation results have shown that the proposed scheme has both the advantages of the increased throughput by 33% and similar BER performance to conventional scheme.