• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.216-217
• /
• 2011

The problem of automated stacking cranes (ASC) dispatching in container terminals is addressed in this paper. We propose a heuristic-based ASC dispatching approach which adopts multi-criteria decision strategy. By aggregating different criteria the proposed strategy can consider multiple aspects of the dispatching situation and make robust decision in various situations. A multi-objective evolutionary algorithm (MOEA) is adopted to tune the weights associated to each criteria to minimize both the quay crane delay and external truck delay. The proposed approach is validated by comparison with different dispatching heuristics and simulation results obtained confirms its effectiveness.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.135-146
• /
• 1993

A ner general multi-layer area router, called DINOSAUR, is presented in this paper. DINOSAUR can route various types of routing areas, such as L-shaped channel, switchbox with/without obstacles, and rectilinear area with/without internal modules/terminals. The DINOSAUR algorithm consists of three major stages: layerless maze routing, layering by coloring, and rip-up and reroute. In layerless maze roution stage, the route of each net is determined by modified maze algorithm without taking the conflicts(short. circuits) into account. In layering by coloring stage, the layer of each net is determinde by a heuristic coloring algorithm. When the conflicts are not removed, rip-up and reroute process is invoded. In rip-up and reroute stage, the conflicts are removed iteratively. Many test cases have been run, and on all the benchmark data known in the literature DINOSAUR has performed either better than or comparable to the other routers.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.213-221
• /
• 2003

In this paper, we consider a multi-objective part-machine grouping problem, in which part types have several alternative part routings and each part routing has a machining sequence. This problem is characterized as optimally determining part type sets and its corresponding machine cells such that the sum of inter-cell part movements and the sum of machine workload imbalances are simultaneously minimized. Due to the complexity of the problem, a two-stage heuristic algorithm is proposed, and experiments are shown to verify the effectiveness of the algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.79-87
• /
• 2023

In this paper, we propose a novel genetic algorithm to reduce the overall span time by optimizing the skid insertion sequence in the shipyard subassembly process. We represented a solution by a permutation of a set of skid ids and applied genetic operators suitable for such a representation. In addition, we combined the genetic algorithm and the existing heuristic algorithm called UniDev which is properly modified to improve the search performance. In particular, the slow skid search part in UniDev was changed to a greedy algorithm. Through extensive large-scaled simulations, it was observed that the span time of our method was stably minimized compared to Multi-Start search and a genetic algorithm combined with UniDev.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.2
• /
• pp.146-158
• /
• 2004

This paper considers a continuous-review two-echelon inventory control problem with one-to-one replenishment policy incorporated and with lost sales allowed where demand arrives in a stationary Poisson process. The problem is formulated using METRIC-approximation in a combined approach of pricing and (S-l, S) inventory policy, for which a heuristic solution algorithm is derived with respect to the corresponding one-warehouse multi-retailer supply chain. Specifically, decisions on retail pricing and warehouse inventory policies are made in integration to maximize total profit in the supply chain. The objective function of the model consists of sub-functions of revenue and cost (holding cost and penalty cost). To test the effectiveness and efficiency of the proposed algorithm, numerical experiments are performed with two cases. The first case deals with identical retailers and the second case deals with different retailers with different market sizes. The computational results show that the proposed algorithm is efficient and derives quite good decisions.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.13-29
• /
• 1997

This paper considers a new routing problem, successive max-min connection ratio problem (SMCRP), arised in circuit telecommunication networks such as SONET and WDM optical transport network. An optimization model for SMCRP is established based on link-flow formulation. It's first optimization process is an integral version of maximum concurrent flow problem. Integer condition does not give the same connection-ratio of each node-pair at an optimal solution any more. It is also an integral multi-commodity flow problem with fairness restriction. In order to guarantee fairness to every node-pair the minimum of connection ratios to demand is maximized. NP- hardness of SMCRP is proved and a heuristic algorithm with polynomial-time bound is developed for the problem. Augmenting path and rerouting flow are used for the algorithm. The heuristic algorithm is implemented and tested for networks of different sizes. The results are compared with those given by GAMS/OSL, a popular commercial solver for integer programming problem.n among ferrite-pearlite matrix, the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 70%, distribution range of fatigue.
ife was small in same stress level. (2) $\sqrt{area}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of $\sqrt{area}_{max}$ may be used as a guideline for the control of inclusion size in the steelmaking.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.67-75
• /
• 2013

The advantages of the orthogonal frequency division multiplexing (OFDM) are high spectral efficiency, resiliency to RF interference, and lower multi-path distortion. To further utilize vast channel capacity of the multiuser OFDM, one has to find the efficient adaptive subchannel and bit allocation among users. In this paper, we compare the performance of the linear programming dual of the 0-1 integer programming formulation with the existing convex optimization approach for the optimal subchannel and bit allocation problem of the multiuser OFDM. Utilizing tight lower bound provided by the LP dual formulation, we develop a primal heurisitc algorithm based on the LP dual solution. The performance of the primal heuristic is compared with MAO, ESA heuristic solutions, and integer programming solution on MATLAB simulation on a system employing M-ary quadrature amplitude modulation (MQAM) assuming a frequency-selective channel consisting of three independent Rayleigh multi-paths.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.269-275
• /
• 2016

This paper considers the arrival, airport and departure capacity as a whole, through which, the network effect between airports is fully emphasized, the flight action is coordinated, and the flight demand pattern is reasonably assigned. The optimization problem of flight queues in multi-airport is studied in detail; the mathematical model of multi-airport opening non-real time flow management in terminal area is established, and related problems such as the parameters, the simplification and the solving of the model are discussed in detail to some extent. Appropriate decision making variables are taken to make the multi-airport network system linear 0-1 integer programming model, thus, the solving of the model is available and the central flow management is realized. The heuristic implicit enumeration presented in this paper can effectively solve this kind of problems. Through the simulation of some airports network system, we not only validate the algorithm presented in this paper, but also give a deep analysis of the results, which would produce reference for later practicable use. The simulation proves that this algorithm offers a good way to settle the problem of multi-airport flight queue optimization in air traffic management automation system in terminal area.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.3
• /
• pp.281-288
• /
• 2001

We consider in this article a multi-objective part-machine grouping problem in which parts have alternative process plans and expected annual demand of each part is known. This problem is characterized as optimally determining part sets and corresponding machine cells such that total sum of distance (or dissimilarity) between parts and total sum of load differences between machines are simultaneously minimized. Two heuristic algorithms are proposed, and examples are given to compare the performance of the algorithms.

• IE interfaces
• /
• v.11 no.1
• /
• pp.85-95
• /
• 1998

This study is focussed on an optimal vehicle routing model for multi-supply centers in two-echelon logistic system. The aim of this study is to deliver goods for demand sites with optimal decision. This study investigated an integrated model using step-by-step approach based on relationship that exists between the inventory allocation and vehicle routing with restricted amount of inventory and transportations such as the capability of supply centers, vehicle capacity and transportation parameters. Three sub-models are developed: 1) sector-clustering model, 2) a vehicle-routing model based on clustering and a heuristic algorithm, and 3) a vehicle route scheduling model using TSP-solver based on genetic and branch-and-bound algorithm. Also, we have developed computer programs for each sub-models and user interface with visualization for major inputs and outputs. The application and superior performance of the proposed model are demonstrated by several sample runs for the inventory-allocation and vehicle routing problems.