• Structural Engineering and Mechanics
• /
• v.64 no.2
• /
• pp.259-270
• /
• 2017

The stochastic vibration response of the sandwich beam with the nonlinear adjustable visco-elastomer core and supported mass under stochastic support motion excitations is studied. The nonlinear dynamic properties of the visco-elastomer core are considered. The nonlinear partial differential equations for the horizontal and vertical coupling motions of the sandwich beam are derived. An analytical solution method for the stochastic vibration response of the nonlinear sandwich beam is developed. The nonlinear partial differential equations are converted into the nonlinear ordinary differential equations representing the nonlinear stochastic multi-degree-of-freedom system by using the Galerkin method. The nonlinear stochastic system is converted further into the equivalent quasi-linear system by using the statistic linearization method. The frequency-response function, response spectral density and mean square response expressions of the nonlinear sandwich beam are obtained. Numerical results are given to illustrate new stochastic vibration response characteristics and response reduction capability of the sandwich beam with the nonlinear visco-elastomer core and supported mass under stochastic support motion excitations. The influences of geometric and physical parameters on the stochastic response of the nonlinear sandwich beam are discussed, and the numerical results of the nonlinear sandwich beam are compared with those of the sandwich beam with linear visco-elastomer core.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.349-357
• /
• 2018

An extensive research was undertaken to study the vibration serviceability of a long-span and light-weight floor subjected to human loading experimentally and numerically. Specifically, heel-drop test was first conducted to capture the floor's natural frequencies and damping ratios, followed by jumping and running tests to obtain the acceleration responses. In addition, numerical simulations considering walking excitation were performed to further evaluate the vibration performance of a multi-panel floor under different loading cases and walking rates. The floor is found to have a high frequency (11.67 Hz) and a low damping ratio (2.32%). The comparison of the test results with the published data from the 1997 AISC Design Guide 11 indicates that the floor exhibits satisfactory vibration perceptibility overall. The study results show that the peak acceleration is affected by the walking path, walking rate, and adjacent structure. A simpler loading case may be considered in design in place of a more complex one.

• Journal of Korea Multimedia Society
• /
• v.20 no.7
• /
• pp.1024-1029
• /
• 2017

A novel analytic solution has been derived for the bird-cage receiver coil of a magnetic resonance imaging (MRI) system, which is widely used in 3-dimensional medical imaging, by transforming the coil into an equivalent circuit model by using a transmission matrix-based circuit analysis. The bird-cage coil composed of N legs is divided into a cell for which input impedance is to be analyzed and the remaining N-1 cells, and then a transmission matrix corresponding to the N-1 cells is converted into a circuit to transform the 3-dimensional bird-cage coil into the 2-dimensional equivalent circuit model, which is suitable to derive the analytic solution for the input impedance. The proposed method derives directly the analytic solution for the input impedance at an arbitrary point of the coil unlike the conventional analytic solution of a bird-cage coil, so that it can be used not only for resonance frequency calculations but also for various coil characteristics analyses. Since the analytic solution agreed well with the results of computational simulations, it can be useful for the impedance matching of a coil and the analysis and the design of a multi-tune bird-cage coil.

• Speech Sciences
• /
• v.15 no.4
• /
• pp.159-170
• /
• 2008

The purpose of this study was to find out the ability of coordination of the articulatory motor and the ability of control of the respiration and laryngeal for spastic dysarthria by acoustic analysis. The sustained of vowel /a/ and repetition of syllable /pa/ in 15 normal and 10 spastic dysarthria were measured. Multi-Speech, MDVP, and MSP were used for data recording and analysis. As a result, the mean DDK rate in the spastic group was significantly slower than in the normal. The maximum phonation time in the spastic group ($4.80{\pm}1.94$) was shorter than in the normal ($11.20{\pm}3.72$). The DDKjit in the spastic group was significantly higher than in the normal. The DDKsla was reduced in the spastic group. The mean syllable duration in the spastic group (146.2ms) was significantly longer than in the normal (75.8ms). The mean energy was reduced in the spastic group. The range of Fo was greater than in the normal. The frequency perturbation (jitter, vFo) and amplitude perturbation (shimmer, vAm) were higher than in the normal group. The NHR was higher than in the normal group. The parameters of this were significantly difference between the spastic dysarthria and the normal (p<0.05). Finally, the spastic dysarthria has short respiration, slow speech rate, and voice quality problem. The these results will help to establish a plan and the intervention of treatment.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.349-352
• /
• 2007

The Fourth Assessment Report of IPCC predicted that global warming is already happening and it should be caused from the increase of greenhouse gases by the extension of human activities. These global changes will give a serious influence for human society. Global environment can be monitored by the earth observation using satellite. For the observation of global climate change and resolving the global warming process, satellite should be useful equipment and its detecting data contribute to social benefits effectively. JAXA (former NASDA) has made a new plan of the Global Change Observation Mission (GCOM) for monitoring of global environmental change. SGLI (Second Generation GLI) onboard GCOM-C (Climate) satellite, which is one of this mission, provides an optical sensor from Near-DV to TIR. Characteristic specifications of SGLI are as follows; 1) 250 m resolutions over land and area along the shore, 2) Three directional polarization observation (red and NIR), and 3) 500 m resolutions temperature over land and area along shore. These characteristics are useful in many fields of social benefits. For example, multi-angular observation and 250 m high frequency observation give new knowledge in monitoring of land vegetation. It is expected that land products with land aerosol information by polarization observation are improved remarkably. We are studying these possibilities by ground data and satellite data.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.303-308
• /
• 2017

Most automobile tire companies have not yet considered the geometric information of a road at the design stage of a tire because the topographical characterization of a road surface is very difficult owing to its vastness and randomness. A road surface shows variable surface roughness values according to magnification, and thus, the contact force between the road and tire significantly fluctuates with respect to the scale. In this study, we make an attempt to define a representative value for surface topographical information at multi-scale levels. To represent surface topography, we use a statistical method called power spectral density (PSD). We use the fast Fourier transform (FFT) and PSD to analyze the height profiles of a random surface. The FFT and PSD of a surface help in obtaining a fractal dimension, which is a representative value of surface topography at all length scales. We develop three surfaces with different fractal dimensions. We use finite element analysis (FEA) to observe the contact forces between a tire and the road surfaces with three different fractal dimensions. The results from FEA reveal that an increase in the fractal dimension decreases the contact length between the tire and road surfaces. On the contrary, the average contact force increases. This result indicates that designing and manufacturing a tire considering the fractal dimension of a road makes safe driving possible, owing to the improvement in service life and braking performance of the tire.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.253-253
• /
• 2011

ZnTe semiconductor is very attractive a material for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. The optoelectronic properties of ZnTe:O film allow to expect a large optical gain in the intermediate emission band, which emission band lies about 0.4-0.6 eV below the conduction band of ZnTe [2]. So, the ZnTe system is useful for the production of high-efficiency multi-junction solar cells [2,3]. In this work, the ZnTe:O thin films were deposited on Al2O3 substrates by using the radio frequency magnetron sputtering system. Three sets of samples were prepared using argon and oxygen as the sputtering gas. The deposition chamber was pre-pumped down to a base pressure of 10-7 Torr before introducing gas. The deposition pressure was fixed at 10-3 Torr throughout this work. During the ZnTe deposition, the substrate temperature was 300 oC. The optical properties were also investigated by using the ultraviolte-visible (UV-Vis) spectrophotometer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1634-1644
• /
• 2007

This study is to define correctly the concept of exotic image that evolved in domestic fashion since 2001 and to analyze the characteristics and current tendency of the domestic fashion items of the exotic image. Thus this study will be helpful in establishing an academic field of the exotic image in the domestic fashion industry which can offer the ideas necessary for the style and item developments. As for the research method of this study, the frequency and content multi-dimensional analysis were used in the investigation of the exotic images appearing in the domestic fashion brands. The types of exotic image are #ecological#, #folk & ethnic costume#, #kitchy bricolage#, #womanish#, #period# types by analyzed with the elements of exotic images in the domestic women#s fashion brand. The exotic image in domestic fashion market in the middle of 2000s is the results of fusion phenomena among various trend styles, and through the compromise and mixture of different elements, exaggerations, and historically different times of old and new. In conclusion, the contemporary concept of exotic image is expanded by the sum of many contributing images. They are the folk ethnic costume image originating from various different cultures and also the fusion images of folk ethnic costumes from non-urban, not-modern, not-industrialized images compromised with unfamiliar codes.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.1
• /
• pp.93-101
• /
• 2016

Objectives: This study aims to analyze the factors influencing on the oral health-related quality of life of migrant women in multicultural families. Methods: An interview survey was conducted through the general characteristics, oral health behaviors, and OHIPs(oral Health Impact Profiles) of 200 migrant women in multicultural families registered in multicultural family support center in Pohang. The survey was carried out from March 2 to 29, 2011. Data were analyzed using SPSS version 18.0 program. by frequency analysis, chi-square test, t-test, ANOVA, and hierarchical regression analysis. Results: Oral health promotion behavior showed statistically significant differences(p<0.01) in the number of tooth brushing and in those using oral health care supplementary device by each country. The oral health-related quality of life was significantly influenced by economic compensation, pregnancy, and the economic status of the native country(p<0.05). Conclusion: The nationwide oral health policy should be established for migrant women in multicultural family.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.998-1004
• /
• 2002

This paper reports a design of feedforward linear power amplifier using pilot tone for IMT-2000 band repeaters accepting multi-carrier. As this time pilot tone is applied to the circuit differently from the existing method. Only one pilot tone is used in both 1-st loop(IMD abstraction loop) and 2-nd loop(IMD cancellation loop) to cancell IMD signals automatically according to variation of frequency or power level of input signals. As an experiment, in range of 2110 MHz - 2170 MHz at LPA output power of $20 W_{avg}$, IMD characteristics of over 20 dB was improved maintaining below -60 dBc considering respective 20 MHz. Therefore the supposed feedforward linear power amplifier can be used for linear power amplifier in IMT-2000 band repeaters.