• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.29-43
• /
• 2000

This study is carried out to investigate the cahracteristics of green management practices and green speed(i.e., ball-roll distance) on 129 Golf Courses in Korea, and to explain the effects of managemet practices that affect green speed. Data collected from green-keepers were subjected to frequency, correlation analysis, and multi-regression analysis using SPSSWIN(Statistical Package for the Social Science). The results are as follows. 1. In spring mowing height, 3.5-4 mm appeared the highest frequency(44.4%) and 4-4.5mm mowing height appeared the high frequency(41.0%). In summer mowing height, 4.5-5mm appeared the highest frequency(51.3%). In fall mowing height, 4-4.5mm appeared the highest frequency(41.0%). 2. In N-fertilizing amount of February and November, 0(zero) g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of June and July 0-2 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of March, May, August, and September 2-4 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of October 2-4 or 6-8 g/$m^2$ appeared the highest frequency. 3. In spring topdressing times, 3-6 times appeared the highest frequency(52.6%). In spring topdressing amount, more than 2mm appeared the highest frequency(35.9%). In summer topdressing tierms, 0-3times appeared the highest frequency(71.8%). In summer topdressing amount, 0.5-1mm appeared the highest frequency(46.2%). In fall topdressing times, 0-3times appeared the highest frequency(47.4%). In fall topdressing amount, more than 2mm appeared the highest frequency(35.9%). 4. In spring irrigation tiems, 3-4times/a week appeared the highest frequency (30.6%). In spring irrigation amount, the irrigation below 5mm/day under appeared the highest frequency(38.7%). In summer irrigation times, 4-7times/ a week appeared the highest frequency(38.9%). In summer irrigation amount, 5-10mm/a day appeared the highest frequency(45.2%). In fall irrigation times, 2-3times/a week appeared the highest frequency(36.1%). In fall irrigation amount, the irrigation below 5mm/a day under appeared the highest frequency(45.2%). 5. In spring aeration times, 2 times appeared the highest frequency(55.2%). In spring aeration depth, 5-10mm appeared the highest frequency(81.6%). In fall aeration times, 1 time appeared the highest frequency(82.5%). In fall aeration depth, 5-10mm appeared the highest frequency(86.8%). 6. In spring green speed, 1.98-2.28 or 2.59-2.89mm appeared the highest frequency(32.7%). In summer green speed, 1.98-2.28mm appeared the highest frequency (46.9%). In fall green speed, 1.98-2.28mm appeared the highest frequency(38.8%). 7. The factors which affect green speed were mowing height, N-fertilizing, season, topdressing, irrigation, and aeration. Vertical mowing did not affect green speed. The order of the relevant important factors was mowing height >: N-fertilizing > season > topdressing > irrigation > aeration. Mowing height and N-fertilizing were the most important factors in green speed. As mowing height decreased, green sped always increased. As total N-fertilizing amount decreased, green speed increased. In summer, green sped decreased remarkably. As topdressing times increased and the topdressing amount decreased, green sped increased. As irrigation times increased and irrigation amount decreased, green speed increased.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.565-571
• /
• 2023

With the introduction of the post-verification system, the measurement of floor impact noise performance on-site has become mandatory, and the evaluation method has changed. To track the performance changes since the policy implementation, research is needed on how the characteristics of heavyweight impact sound change according to the varied evaluation method. In this study, we analyzed the contribution rate of the frequency band-specific sound pressure level on the single-number quantity for a multi-family housing unit with the same floor plan and floor structure, comprising 59 households, based on the changed impact sources and evaluation indicators. It is difficult to compare simply because the method of calculating contributions by frequency band according to the single-day evaluation is different, but the average contribution rate of 63 Hz was 80.8 % in the evaluation method before the introduction of the post-confirmation system (Tire measurement and evaluated as L'_i,Fmax,AW), and the average contribution rate of 125 Hz was 19.2 %. The current evaluation method (rubber ball measurement and evaluation as L'_iA,Fmax) shows that the contribution rate has decreased to 33.1 % on average at 50 Hz ~ 80 Hz, 58.7 % on average at 100 Hz ~ 160 Hz, 6.9 % on average at 200 Hz ~ 315 Hz, and 1.3 % on average at 400 Hz ~ 630 Hz. This result is a case analysis for the target apartment house, and it is necessary to analyze measurement data for more diverse apartment houses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.85-96
• /
• 2017

In this paper, a 2~18 GHz wideband 6-port network is designed and fabricated to extend the measurement frequency bandwidth of noise parameter measurement method using 6-port network. In order to design a broadband 6-port network, a wilkinson power divider and a directional coupler with wideband characteristics are designed. The wilkinson power divider is designed as a three-section structure to achieve wideband characteristics. The direction coupler is designed as a three-section structure and slot-coupled structure using multi-layer substrate to obtain wideband characteristics. A wideband 6-port network is designed and fabricated combining the designed power divider and coupler. The measured results of the fabricated 6-port network for the 2~18 GHz band show characteristics applicable to the noise parameter measurement method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.519-526
• /
• 2013

ECG signal has the feature that is repeated in a cycle of P, Q, R, S, and T waves and is sampled at a high sampling frequency in general. By using the feature of periodic ECG signals, maximizing compression efficiency while minimizing the loss of important information for diagnosis is required. However, the periodic characteristics of such amplitude and period is not constant by measuring time and patients. Even though measured at the same time, the patient's characteristics display different periodic intervals. In this paper, an adaptive multi-level coding is provided by coding adaptively the dominant and non-dominant signal interval of the ECG signal. The proposed method can maximize the compression efficiency by using a multi-level code that applies different compression ratios considering information loss associated with the dominant signal intervals and non-dominant signal intervals. For the case of long time measurement, this method has a merit of maximizing compression ratio compared with existing compression methods that do not use the periodicity of the ECG signal and for the lossless compression coding of non-dominant signal intervals, the method has an advantage that can be stored without loss of information. The effectiveness of the ECG signal compression is proved throughout the experiment on ECG signal of MIT-BIH arrhythmia database.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.289-296
• /
• 2019

In the era of M-ICT (mobile information communication technology), it is becoming more and more important to establish a city brand image that is "user-centered" and creates a new experience of "interaction between people, people and things, and people and space". The experience of city users on the brand image of a city is the key factor to determine the competitiveness of the city, among which the user's research on the touch point of the city brand is particularly important. The purpose of this study is to enhance the user's brand experience and enhance the city's brand competitiveness. The research methods of this paper are literature review and investigation. Firstly, the background and purpose of the study are expounded, then the characteristics and ways of user experience touch points are defined through the document review, and the multi-latitude composition model of city brand touch points is proposed. By means of user investigation, the structural characteristics of high frequency touch points between digital touch points and physical touch points are obtained. According to the problems found in the investigation, the optimal design strategy of touch point is put forward in combination with the case. The innovation of this study is to study the relationship between the city brand and the touch point of user experience from the perspective of user experience, and propose a multi-latitude model of the touch point of city brand.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.103-112
• /
• 2012

We demonstrate the preliminary results of ship detection application using synthetic aperture radar (SAR) and automatic identification system (AIS) together. Multi-frequency and multi-temporal SAR images such as TerraSAR-X and Cosmo-SkyMed (X-band), and Radarsat-2 (C-band) are acquired over the West Sea in South Korea. In order to compare with SAR data, we also collected an AIS data. The SAR data are pre-processed considering by the characteristics of scattering mechanism as for sea surface. We proposed the "Adaptive Threshold Algorithm" for classification ship efficiently. The analyses using the combination of the SAR and AIS data with time series will be very useful to ship detection or tracing of the ship.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.17-23
• /
• 2004

The mobile radio channel can be simulated as a complex-valued random process with narrow-band spectrum. This paper describes a real-time implementation of that process using a INS320C6414 digital signal processor and XC2VP30 Virtex FPGA. The simulator presented here is not only a comprehensive model of the flat fading but also frequency selective fading mobile channel conditions. To replicate the statistical characteristics of the multipath fading environment with the minimum computational burden, multi-rate techniques are employed to resolve practical problems such as variable sampling rate. The simulator produces accurate and consistent results due to digital implementation. It is very flexible and simple to program for various field conditions in mobile communications with a graphical user interface.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.576-582
• /
• 2001

The Multi-Band Excitation(MBE) speech coder uses a different approach for the representation of the excitation signal. It replaces the frame-based single voiced/unvoiced classification of a classical speech coder with a set of such decision over harmonic intervals in the frequency domain. This enables each speech segment to be a mixture of voiced and unvoiced, and improves the synthetic speech quality by reducing decision errors that might occur on the frame-based single voiced and unvoiced decision process when input speech is degraded with noise. The IMBE-LP, improved version of MBE with linear prediction, represents the spectral information of MBE model with linear prediction coefficients to obtain low bit rate of 2.4 kbps. In this Paper, we proposed a variable rate IMBE-LP vocoder that has lower bit rate than IMBE-LP without degrading the synthetic speech quality. To determine the LP order, it uses the spectral band information of the MBE model that has something to do with he input speech's characteristics. Experimental results are riven with our findings and discussions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.781-787
• /
• 2004

In this paper, a novel dual and wide band aperture stacked patch antenna for Cellular/PCS/IMT-2000 base station is presented. It consists of single microstrip patch having notches along the radiating patch, two dielectric substrates and a form material. To achieve wide band characteristic, we utilize the coupling effect between the notched patch and the resonant aperture in the ground plane and by properly cutting notches on the patch, an aperture stacked patch antenna could be designed to yield dual frequency operation. By the proper choice of resonant aperture size and height of a foam material, dual and wide band characteristic could be realized the measured impedance bandwidth(1:1.5 VSWR) of designed antenna at lower band(860 MHz) reaches 77 MHz and covers the Cellular CDMA band(824∼894 MHz). The measured impedance bandwidth(1:1.5 VSMR) of the designed antenna at upper band(1,960 MHz) is about 550 MHz and covers both the PCS band(1,750∼l,870 MHz) and the for-2000 band(1,920∼2,170 MHz). Good broadside radiation with high gain(5.65∼7.4 dBi) characteristics have also been observed.