• Clinics in Orthopedic Surgery
• /
• v.10 no.4
• /
• pp.484-490
• /
• 2018

Background: The use of three-dimensional multi-segment foot models (3D MFMs) is increasing since they have superior ability to illustrate the effect of foot and ankle pathologies on intersegmental motion of the foot compared to single-segment foot model gait analysis. However, validation of the repeatability of the 3D MFMs is important for their clinical use. Although many MFMs have been validated in normal adults, research on MFM repeatability in children is lacking. The purpose of this study is to validate the intrasession, intersession, and interrater repeatability of an MFM with a 15-marker set (DuPont foot model) in healthy children. Methods: The study included 20 feet of 20 healthy children (10 boys and 10 girls). We divided the participants into two groups of 10 each. One group was tested by the same operator in each test (intersession analysis), while the other group was tested by a different operator in each test (interrater analysis). The multiple correlation coefficient (CMC) and intraclass correlation coefficient (ICC) were calculated to assess repeatability. The difference between the two sessions of each group was assessed at each time point of gait cycle. Results: The intrasession CMC and ICC values of all parameters showed excellent or very good repeatability. The intersession CMC of many parameters showed good or better repeatability. Interrater CMC and ICC values were generally lower for all parameters than intrasession and intersession. The mean gaps of all parameters were generally similar to those of the previous study. Conclusions: We demonstrated that 3D MFM using a 15-marker set had high intrasession, intersession, and interrater repeatability in the assessment of foot motion in healthy children but recommend some caution in interpreting the hindfoot parameters.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.315-319
• /
• 2007

지하에 설 치된 맨홀의 구조물이 노후되거나, 내부에 수 용된 시설물로 작업 공간이 협소하여 맨홀 구조물을 대개체 할 펼요가 있을 경우, 지금까지는 대부분 현장 콘크리트 타설에 의한 방법을 사용하였다. 이러한 방법은 거푸집 시공, 콘크리트 타설, 콘크리트 양생, 거푸집 철거 등의 공정이 소요되어 공사 기간이 장기화 되고, 도심지에 위치한 맨홀인 경우에는 차량과 보행자의 통행 불편을 초래하기도 하였다. 또한, 통상적으로 사용되고 있는 프리캐스트 맨홀에 비해 시공 품질이 낮아 향후 맨홀의 운용 및 유지관리에 많은 어려움을 겪는 원인이 되기도 하였다. 본 논문에서는 이러한 문제점들을 해결하기 위해, 폴리머 콘크리트를 이용하여 하부, 벽체, 상부로 구성된 다수의 세그먼트를 생산한 후, 현장에서 이들 세그먼트를 조립하여 맨홀을 설치하는 방법을 연구하였다. 가변형 거푸집을 이용한 세그먼트 제작과 조립식 블록에 의한 관구를 사용하여 현장 적용성을 높임은 물론, 프리캐스트로 생산되는 폴리머 콘크리트 맨홀 수준의 시공 품질을 확보할 수 있도록 하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.146-149
• /
• 1995

This paper proposes a SM-CELP speech coder which applies different excitation signal according to the characteristic of speech segment at bit-rate below 4 kbps. Speech signal is divided with 2 modes such as stationary voice and etc. using the parameters of average energy of the short-time speech and the residual signal after long term prediction. Structured multi-pulse method is used for the excitation of mode-A and gaussian or pulse-like codebook for mode-B. 4.8kbps DoD-CELP are used to evaluate the performance of the proposed coder. As a result, the propose method shows 1~2 dB higher segmental signal to noise ratio and better subjectional quality without increasing the computational amount.

• International Journal of Contents
• /
• v.16 no.4
• /
• pp.26-38
• /
• 2020

Determining the optimal levels of the technical attributes (TAs) of a product to achieve a high level of customer satisfaction is the main activity in the planning process for quality function deployment (QFD). In real applications, the number of customer requirements for developing a single product is quite large, and the number of converted TAs is also high so the size of the house of quality (HoQ) becomes huge. Furthermore, the TA levels are often discrete instead of continuous and the product market can be divided into several market segments corresponding to the number of HoQ, which also unacceptably increases the size of the QFD optimization problem and the time spent on making decisions. This paper proposed a genetic algorithm (GA) solution approach to finding the optimum set of TAs in QFD in the above situation. A numerical example is provided for illustrating the proposed approach. To assess the computational performance of the GA, tests were performed on problems of various sizes using a fractional factorial design.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.134-148
• /
• 2016

In this study, we determined the characteristics and importance of market maven to today's fashion retailers. Market maven is defined as an individual who is highly involved in the marketplace and takes a role as an information diffuser. In order to identify market maven, a total of 415 data were collected from 30-40 consumers who purchased fashion items from the various types of retailers. The data were divided into three groups based on the average score of summated market maven's scale, and the high group was referred to as "market mavens." Results suggested that the market mavens existed in the fashion retailing market and presented the differences from the other two groups. The market maven group spent more and purchased more fashion items than the other groups. With respect to shopping behavior, the market maven group was more likely to browse and bargain hunt when shopping, and showed higher mean scores on impulse buying and overall satisfaction. In addition, market maven tended to purchase fashion items from different types of retailers including online channel. Accordingly, market mavens seemed to present common characteristics with heavy browser, recreational shopper, and/or multi-channel shopper. Market mavens showed shopping enjoyment characteristics when searching for market-related information from various retailers, hence this segment should be the essential target market in the multi-channel retailing environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1653-1658
• /
• 2018

This study aims to analyze the cases of VR space to improve the regulations. The space is divided according to the multi-use business act when the VR simulator and the VR game are simultaneously installed in a single space. It is necessary to amend the rules of the Tourism Promotion Act so that it can operate at a certain area of the youth game room subject to the Game Industry Law. Amendments that do not compartmentalize a space partition in the Multi-use Business Act should be carried out simultaneously. This is safer alternative by collective management rather than by the safety applied within a limited space by eliminating the compartment by industry. This is a legal amendment that allows VR simulator and VR game to be operated in the same space even in small sized amusement facilities such as other amusement facilities. This regulatory improvement plan is expected to help the activation of small sized VR theme parks.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.3
• /
• pp.5-13
• /
• 1992

Taking devantage of the property that Korean digit is a mono-syllable word, we proposed a spoken Korean-digit recognition scheme using the multi-layer perceptron. The spoken Korean-digit is divided into three segments (initial sound, medial vowel, and final consonant) based on the voice starting / ending points and a peak point in the middle of vowel sound. The feature vectors such as cepstrum, reflection coefficients, ${\Delta}$cepstrum and ${\Delta}$energy are extracted from each segment. It has been shown that cepstrum, as an input vector to the neural network, gives higher recognition rate than reflection coefficients. Regression coefficients of cepstrum did not affect as much as we expected on the recognition rate. That is because, it is believed, we extracted features from the selected stationary segments of the input speech signal. With 150 ceptral coefficients obtained from each spoken digit, we achieved correct recognition rate of 97.8%.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.291-300
• /
• 2019

If pipes are damaged in a water distribution network (WDN), adjacent valves are closed to isolate the pipes for repair. Due to the closed valves, parts of WDN are isolated from water supply sources. The isolated area is divided into Intended Isolation Area (IIA) and Unintended Isolation Area (UIA). The IIA occurs by intention to isolate the damaged pipe, while UIA is unintentionally disconnected from the sources due to IIA. Thus, the extension of isolated area and suspended flows are mainly affected by number and location of installed valves in WDN. In this study, optimization models were developed to determine optimal valve locations in WDN. In a single-objective model, total water supply suspension is minimized, while a multi-objective model intends to simultaneously minimize the suspended flow and valve installation cost. Optimal valve placement results obtained from both models were compared and analyzed using a sample application network.

• Journal of Korean Neurosurgical Society
• /
• v.66 no.1
• /
• pp.33-43
• /
• 2023

Objective : To compare the outcomes of anterior lumbar interbody fusion (ALIF), oblique lumbar interbody fusion (OLIF), and transforaminal lumbar interbody fusion (TLIF) in terms of global sagittal alignment. Methods : From January 2007 to December 2019, 141 adult patients who underwent multilevel interbody fusion for lumbar degenerative disorders were enrolled. Regarding the approach, patients were divided into the ALIF (n=23), OLIF (n=60), and TLIF (n=58) groups. Outcomes, including local radiographic parameters and global sagittal alignment, were then compared between the treatment groups. Results : Regarding local radiographic parameters, ALIF and OLIF were superior to TLIF in terms of the change in the anterior disc height (7.6±4.5 mm vs. 6.9±3.2 mm vs. 4.7±2.9 mm, p<0.001), disc angle (-10.0°±6.3° vs. -9.2°±5.2° vs. -5.1°±5.1°, p<0.001), and fused segment lordosis (-14.5°±11.3° vs. -13.8°±7.5° vs. -7.4°±9.1°, p<0.001). However, regarding global sagittal alignment, postoperative lumbar lordosis (-42.5°±9.6° vs. -44.4°±11.6° vs. -40.6°±12.3°, p=0.210), pelvic incidence-lumbar lordosis mismatch (7.9°±11.3° vs. 6.7°±11.6° vs. 11.5°±13.0°, p=0.089), and the sagittal vertical axis (24.3±28.5 mm vs. 24.5±34.0 mm vs. 25.2±36.6 mm, p=0.990) did not differ between the groups. Conclusion : Although the anterior approaches were superior in terms of local radiographic parameters, TLIF achieved adequate global sagittal alignment, comparable to the anterior approaches.

• Journal of Chest Surgery
• /
• v.38 no.8 s.253
• /
• pp.551-556
• /
• 2005

Background: Complete arterial off-pump coronary artery bypass grafting (OPCAB) by sequential anastomoses with one or two arterial grafts provides favorable outcomes. However, problems of insufficient graft length, hypopefusion, kinking of graft, and unfavorable course of graft may be encountered. To solve these problems, we have used different technique with multiple arterial Y composite graft to allow end-to-side rather than sequential anastomoses and evaluated the results of this method. Material and Method: Between February 2003 and October 2004, If patients underwent total arterial OPCAB using multiple arterial V composite grafts with left internal mammary artery (LIMA), radial artery (RA), and right internal mammary artery (RIMA). We divided RA into multiple segments by number of distal target site after measuring of individual proper length and constructed arterial composite graft. One of segments was sutured end-to-side to LIMA and other segment was sutured end-to-side to the previously constructed radial graft. Postoperative graft patency was evaluated in 6f patients by multi-slice computed tomegraphy. Result: An average of $2.5\pm0.6$ arteries and $3.7pm0.7$ distal anastomoses per patient were done. There was no perioperative myocardial infarction, clinical hypoperfusion syndromes, and operative mortality. Postoperative mean CK-MB level was $17.4pm29.7\;IU/L.$Overall graft patency was $99.1\%\;(214/216)(LIMA:\;100\%,\;RA:\;98.4\%,\;RIMA:\;100\%).$ Conclusion: This technique allows total arterial OPCAB without technical problems and provides excellent early clinical results and graft patency. We believe that this technique is more convenient in the obtuse marginal area compared to sequential technique, and helpful in patients who require complex arterial grafting.