• 한국환경과학회지
• /
• 제18권3호
• /
• pp.309-314
• /
• 2009

A accurate reservoir inflow is very important as providing information for decision making about the water balance and the flood control, as well as for dam safety. The methods to calculate the inflow were divided by the directed method to measure streamflow from upstream reservoirs and the indirected method to estimate using the correlation of reservoir water level and release. Currently, the inflow of multi-purpose dam is being calculated by the indirect method and the reservoir water level to calculate the storage capacity is being used by centimeters(cm) units. Corresponding to the storage volume of 1cm according to scale and water level of multi-purpose dam comes up to from several 10 thousand tons to several million tons. If it converts to inflow during 1 hour, and it comes to several hundred $m^3/sec$(CMS). Therefore, the inflow calculated on the hourly is largely deviated along the water level changes and is occurred minus value as the case. In this research, the water level gage has been developed so that it can measure a accurate water level for the improvement for the error and derivation of inflow, even though there might be various hydrology and meteorologic considerations to analyse the water balance of reservoir. Also, it is confirmed that the error and the standard derivation of data observed by the new gage is decreased by 89,6% and 1/3 & 87% and 2/3 compared to that observed by the existing gage of Daecheong and Juam multi-purpose dam.

• 방송공학회논문지
• /
• 제20권4호
• /
• pp.545-556
• /
• 2015

차세대 3차원 디스플레이 및 서비스를 지원하기 위한 HEVC 기반 3차원 비디오 코딩 표준(3D-HEVC)이 최근 완료되었다. 3D-HEVC는 소수의 텍스처 영상(Texture image)과 깊이 영상(Depth map image)으로 구성된 Multi-view plus depth (MVD) 포맷을 효율적으로 처리하기 위한 표준으로써 H.264/AVC와 HEVC에서 사용하는 단일 계층 부호화 방법과 더불어 텍스처 영상들간, 깊이 영상들간, 텍스처 영상과 깊이 영상들간의 예측을 수행하는 인터-컴포넌트 부호화 기술을 추가적으로 사용한다. 본 논문에서는 3D-HEVC 표준의 일반적인 코딩 구조, 3D-HEVC 기술의 기반이 되는 인터-컴포넌트 부호화 기술 및 인터-컴포넌트 부호화 효율에 중요한 영향을 미치는 시차 벡터(Disparity vector) 유도 기술에 대해 상세히 소개한다. 또한 본 논문에서는 3D-HEVC의 부호화 효율을 검증하기 위해 각 시점을 HEVC로 부호화한 방법과 단순 다시점 확장 표준인 MV-HEVC와의 성능평가를 수행한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.172-175
• /
• 2001

This paper presents a new energy function reflecting the damping effect in multi-machine power systems. The Lyapunov direct method provides precise and rigorous theoretical backgrounds for stability analysis of nonlinear systems. Incorporating damping effects into accurate estimates of the domain of attraction, which is a minor but crucial point, has been attempted with long history to yield partial success for single machine systems. In this paper, the damping-reflected energy function presented in the previous work has been generalized for application to multi-machine systems. The generalized energy function is tested for the WSCC 9-bus system to show the semi-negativeness of its time derivative.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.467-481
• /
• 2018

Modular multilevel converter (MMC)-based high-voltage direct current (HVDC) presents attractive technical advantages and contributes to enhanced system operation and reduced oscillation damping in dynamic MMC-HVDC systems. We propose an advanced small-signal multi-terminal MMC-HVDC based on dynamic phasors and state space for power system stability analysis to enhance computational accuracy and reduce simulation time. In accordance with active and passive network control strategies for multi-terminal MMC-HVDC, the matchable small-signal stability models containing high harmonics and dynamics of internal variables are conducted, and a related theoretical derivation is carried out. The proposed advanced small-signal model is then compared with electromagnetic-transient and traditional small-signal state-space models by adopting a typical multi-terminal MMC-HVDC network with offshore wind generation. Simulation indicates that the advanced small-signal model can successfully follow the electromechanical transient response with small errors and can predict the damped oscillations. The validity and applicability of the proposed model are effectively confirmed.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.145-155
• /
• 1985

The recent trend in shipbuilding technology is toward development of highly economical vessels of which construction and operation costs are minimized, whereas cargo transport capacity is maximized. But, most of the vessel which are now operated by some of the nation's shipping companies are uneconomical ones built before oil crisis and consequently the companies are suffering from long-lasted deficit problem. In this paper, derivation study of optimum vessel for multi purpose cargo vessel on south-East Asian trade route is carried out to solve this problem. The Required Freight Rate is used as a measure of merits.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 춘계학술대회 논문집
• /
• pp.429-431
• /
• 2008

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.368-374
• /
• 2008

Multi-axial simulation table(MAST) is widely used in motor companies as the multi-axial excitor for vibration fatigue of target component, which provides the vibrational condition as close as the vehicle test. However, the vibration fatigue performance of target component can be guaranteed with MAST system only in case the input profile covers the required severity of the target component on field test. In this paper, the signal processing for multi-axial vibration fatigue test on vehicle component is presented, from the data acquisition of the target component to the derivation of input profile. To compare the severity of vibration condition between field and proving ground, the energy principle of a equivalent damage is proposed and then, it is determined the optimal combination of special events on proving ground using a sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.208-213
• /
• 2004

This paper is concerned with the theoretical estimation of the single-input single-output(SISO) positive position feedback(PPF) controller and the derivation of the stability conditions for the multi-input multi-output (MIMO) PPF controller. Although the stability condition for the SISO PPF controller was derived in the earlier works, the question regarding the performance estimation of the SISO PPF controller has never been studied theoretically. Hence, the SISO PPF controller for the single degree-of-freedom system was first investigated and then control parameters including gain, the filter frequency, and the damping factor of the PPF controller were analyzed in detail thus providing the design methodology for the SISO PPF controller. In the case of real structure. there are infinite number of natural modes so that some modes are to be controlled by a limited number of actuator and sensor. Based on the theoretical results on the SISO PPF controller, the stability condition for the multi-input multi-output PPF controller was derived when only the few number of modes are to be controlled. The control spillover problem is also discussed in detail.

• 한국통신학회논문지
• /
• 제40권10호
• /
• pp.2080-2089
• /
• 2015

본 논문에서는 3차원 비디오 압축을 위한 표준으로서 3D-AVC와 3D-HEVC에 채택된 주위 블록의 변위 벡터정보를 이용한 블록 기반의 변위 벡터 추정 기법 (Neighboring block-based disparity vector, NBDV)을 설명하고 성능을 평가하여 분석한다. NBDV에서는 시간적 공간적으로 인접한 주위 블록에서 부호화를 완료한 변위 움직임 벡터 (disparity motion vector)를 이용하여 변위 벡터로 변환한다. 변위 벡터는 인접 시점에서 현재 블록에 대응하는 블록을 지시하는 벡터로 시점간 통계적 연관성을 이용함으로써 3차원 동영상의 부호화 효율을 증대하는데 중요한 기능을 제공한다. 제안 기술은 저 복잡도와 동일 화질에서 약 20%의 부호화 효율 증가, 그리고 네트워크 내 미디어 게이트웨이의 효율적인 동작을 제공하는 텍스쳐 비디오 우선 부호화 방식을 지원하여 3차원 비디오 압축 표준 기술로 최종 채택되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권4호
• /
• pp.822-839
• /
• 2011

Group key agreement protocols derive a shared secret key for a group of users to ensure data confidentiality or/and integrity among the users in the subsequent communications. In this paper, we inspect two group key agreement schemes which have been proposed by Shi et al. and Zheng et al. in 2005 and 2007 respectively. Although both schemes were claimed to be secure in a heuristic way, we reveal several flaws using the Bellare-Rogaway security model extended to multi-party setting by Bresson et al. These flaws are found to be originated from inappropriate selection of key derivation function, inadvertent exclusion of partners' identities from the protocol specification and insufficient consideration in preserving known temporary information security and key freshness properties. Furthermore, we suggest and discuss proper countermeasures to address such flaws.