• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.83-93
• /
• 2014

It is a widespread concern that electrical interconnection based network-on-chip (NoC) will ultimately face the limitation in communication bandwidth, transmission latency and power consumption in the near future. With the development of silicon photonics technology, a hybrid optical network-on-chip (HONoC) which embraces both electrical- and optical interconnect, is emerging as a promising solution to overcome these problems. Today's leading edge systems-on-chips (SoCs) comprise heterogeneous many-cores for higher energy efficiency, therefore, extended study beyond regular topology based NoC is required. This paper proposes an energy and latency optimization topology design technique for HONoC taking into account the traffic characteristics of target applications. The proposed technique is implemented with genetic algorithm and simulation results show the reduction by 13.84% in power loss and 28.14% in average latency, respectively.

• Magazine of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.28-35
• /
• 2008

The Burj Dubai Project will be the tallest structure ever built by man; when completed the tower will be more than 700 meter tall and more than 160 floors. While the early integration of aerodynamic shaping and wind engineering considerations played a major role in the architectural massing and design of this multi-use/residential tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria, the material selection for the structural systems of the tower was also a major consideration and required detailed evaluation of the material technologies and skilled labor available in the market at the time Concrete was selected for its strength, stiffness, damping, redundancy, moldability, free fireproofing, speed of construction, and cost effectiveness. In addition, the design challenges of using concrete for the design of the structural system components will be addressed. The focus on this paper will also be on the early planning of the concrete works of the Burj Dubai Project.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.378-386
• /
• 2007

Bio-sensing devices, which are basically integrated and miniaturized assay systems consisted of bioreceptor and signal transducer, are advantageous in several ways. In addition to their high sensitivity, selectivity, simplicity, multi-detection capability, and real time detection abilities, they are both very small and require relatively inexpensive equipments. Two core technologies are required to develop bio-sensing devices; the fabrication of biological receptor module (both of receptor development and immobilisation of them) and the development of signal transducing instruments containing signal generation technique. Various biological receptors, such as enzymes, DNA/RNA, protein, and cell were tried to develop bio-sensing devices. And, the signal transducing instruments have also been extensively studied, especially with regard to electrochemical, optical, and mass sensitive transducers. This article addresses bio-sensing devices that have been developed in the past few years, and also discusses possible future major trends in these devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1104-1113
• /
• 2014

Future combat systems can be represented as the NCW (Network Centric Warefare), which is based on the concept of Sensor-to-Shooter. A wireless video sensor networking technology, one of the core components of NCW, has been actively applied for the purpose of tactical surveillance. In such a surveillance sensor network, multi-composite sensors, especially consisting of image sensors are utilized to improve reliability for intrusion detection and enemy tracing. However, these sensors may cause a problem of requiring very high network capacity and energy consumption. In order to alleviate this problem, this paper proposes an image data transmission scheme based on resource reservation. The proposed scheme can make it possible to have more reliable image data transmission by choosing proper multiple interfaces, while trying to control resolution and compression quality of image data based on network resource availability. By the performance analysis using NS-3 simulation, we have confirmed the transmission reliability as well as energy efficiency of the proposed scheme.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1017-1026
• /
• 2009

The solar cell system operates by facing the sun-light. Minor cracks, static discharge, and thermal shock that can happen during production/testing phase can lead to degradation in performance during operation, since solar cells are exposed to extreme thermal/mechanical environment in space. In order to detect small cracks and internal damages in the solar cells due to thermal shocks, which are the core units of a solar cell system, expensive equipment, complicated test process, and much time are required. Therefore, a qualitative method for easily and quickly testing the 'health' of solar cell functionality is required. This dissertation describes a theoretical and technical grounds for quickly and easily evaluating the health of solar cells using electroluminescence effect of Gallium-Arsenide solar cells that are most widely used by spacecrafts in recent years. Also described in the dissertation is the technical issues and constraining factors for applying the proposed method to actual space-rated solar cell systems.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.439-446
• /
• 2016

In this paper, an efficient prediction accuracy enhancement strategy is proposed for improving the performance of the prediction-based parallel event-driven gate-level timing simulation. The proposed new strategy adopts the static double prediction and the dynamic prediction for input and output values of local simulations. The double prediction utilizes another static prediction data for the secondary prediction once the first prediction fails, and the dynamic prediction tries to use the on-going simulation result accumulated dynamically during the actual parallel simulation execution as prediction data. Therefore, the communication overhead and synchronization overhead, which are the main bottleneck of parallel simulation, are maximally reduced. Throughout the proposed two prediction enhancement techniques, we have observed about 5x simulation performance improvement over the commercial parallel multi-core simulation for six test designs.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.595-618
• /
• 2010

This paper describes the application of a wireless sensor network to a 31 meter-tall medieval tower located in the city of Trento, Italy. The effort is motivated by preservation of the integrity of a set of frescoes decorating the room on the second floor, representing one of most important International Gothic artworks in Europe. The specific application demanded development of customized hardware and software. The wireless module selected as the core platform allows reliable wireless communication at low cost with a long service life. Sensors include accelerometers, deformation gauges, and thermometers. A multi-hop data collection protocol was applied in the software to improve the system's flexibility and scalability. The system has been operating since September 2008, and in recent months the data loss ratio was estimated as less than 0.01%. The data acquired so far are in agreement with the prediction resulting a priori from the 3-dimensional FEM. Based on these data a Bayesian updating procedure is employed to real-time estimate the probability of abnormal condition states. This first period of operation demonstrated the stability and reliability of the system, and its ability to recognize any possible occurrence of abnormal conditions that could jeopardize the integrity of the frescos.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.57-64
• /
• 2019

In this paper, an efficient prediction-based parallel simulation method using spatially partial simulation strategy is proposed for improving both the performance of the event-driven gate-level timing simulation and the debugging efficiency. The proposed method quickly generates the prediction data on-the-fly, but still accurately for the input values and output values of parallel event-driven local simulations by applying the strategy to the simulation at the higher abstraction level. For those six designs which had used for the performance evaluation of the proposed strategy, our method had shown about 3.7x improvement over the most general sequential event-driven gate-level timing simulation, 9.7x improvement over the commercial multi-core based parallel event-driven gate-level timing simulation, and 2.7x improvement over the best of previous prediction-based parallel simulation results, on average.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2023

It is impossible to overwrite on an already allocated page in SSDs, so whenever a write operation occurs a page replacement with a clean page is required. To resolve this problem, SSDs have an internal flash translation layer called FTL that maps logical pages managed by a file system of operating system to currently allocated physical pages. SSD pages discarded due to write operations must be recycled through initialization, but since the number of initialization times is limited the FTL provides a caching function to reduce the number of writes in addition to the page mapping function, which is a core function. In this study, we focus on the FTL cache methodologies reducing the number of page writes and analyze the related algorithms, and propose a write-only cache strategy. As a result of experimenting with the write-only cache using a simulator, it showed an improvement of up to 29%.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.12
• /
• pp.955-963
• /
• 2017

Nowadays, fintech becomes the key technology of the mobile banking and payments. Financial market is moved to fintech-based non-face-to-face trade/payment from traditional face-to-face process in Korea. Core of this transition is the smartphones, which have several sensitive sensors for personal identifications such as fingerprint and iris recognition sensors. But it has some originated security risks by data path attacks, for instance, hacking and pharming. Multi-level certification and security systems are applied to avoid these threats effectively, while these protections can be cause of some inconvenience for non-face-to-face certifications and financing processes. In this paper, I confirmed that it have sensible differences correspond with the data connection paths such as WiFi networks and mobile communication networks of the smartphones, and I propose a gradual certification method which alleviates the inconvenience by risk-level definitions of the data-paths.