• Computers and Concrete
• /
• v.32 no.1
• /
• pp.61-74
• /
• 2023

This article investigates the wave propagation analysis of the imperfect functionally graded (FG) sandwich plates based on a novel simple four-variable integral quasi-3D higher-order shear deformation theory (HSDT). The thickness stretching effect is considered in the transverse displacement component. The presented formulation ensures a parabolic variation of the transverse shear stresses with zero-stresses at the top and the bottom surfaces without requiring any shear correction factors. The studied sandwich plates can be used in several sectors as areas of aircraft, construction, naval/marine, aerospace and wind energy systems, the sandwich structure is composed from three layers (two FG face sheets and isotropic core). The material properties in the FG faces sheet are computed according to a modified power law function with considering the porosity which may appear during the manufacturing process in the form of micro-voids in the layer body. The Hamilton principle is utilized to determine the four governing differential equations for wave propagation in FG plates which is reduced in terms of computation time and cost compared to the other conventional quasi-3D models. An eigenvalue equation is formulated for the analytical solution using a generalized displacements' solution form for wave propagation. The effects of porosity, temperature, moisture concentration, core thickness, and the material exponent on the plates' dispersion relations are examined by considering the thickness stretching influence.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3732-3753
• /
• 2023

The Real-time Analysis for Particle-transport and In-situ Detection (RAPID) Code System, developed based on the Multi-stage Response-function Transport (MRT) methodology, enables real-time simulation of nuclear systems such as reactor cores, spent nuclear fuel pools and casks, and sub-critical facilities. This paper presents the application of a novel fission matrix-based burnup methodology to the well-characterized JSI TRIGA Mark II research reactor. This methodology allows for calculation of nuclear fuel depletion by combination and interpolation of RAPID's burnup dependent fission matrix (FM) coefficients to take into account core changes due to burnup. The methodology is compared to experimentally validated Serpent-2 Monte Carlo depletion calculations. The results show that the burnup methodology for RAPID (bRAPID) implemented into RAPID is capable of accurately calculating the k_eff burnup changes of the reactor core as the average discrepancies throughout the whole burnup interval are 37 pcm. Furthermore, capability of accurately describing 3D fission source distribution changes with burnup is demonstrated by having less than 1% relative discrepancies compared to Serpent-2. Good agreement is observed for axially and pin-wise dependent fuel burnup and nuclear fuel nuclide composition as a function of burnup. It is demonstrated that bRAPID accurately describes burnup in areas with high gradients of neutron flux (e.g. vicinity of control rods). Observed discrepancies for some isotopes are explained by analyzing the neutron spectrum. This paper presents a powerful depletion calculation tool that is capable of characterization of spent nuclear fuel on the fly while the reactor is in operation.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.31-39
• /
• 2012

Simulation Framework is a basic software tool used to develop simulation applications. This paper describes the development of a discrete event simulation framework based on DEVS(Discrete EVent System Specification) formalism, using MATLAB language which is widely used in technical computing and engineering disciplines. The newly developed framework utilizing MATLAB object oriented programming combines the convenience of MATLAB language and the sophisticated architecture of the DEVS formalism. Hence, it supports the productivity, flexibility, extensibility that are required for the simulation application software development of the weapon systems engagement. Moreover, it promises a simulation application the increased the computation speed proportional to the number of CPU of a multi-core processor, providing the batch simulation functionality based on MATLAB parallel computing technology.

• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.759-766
• /
• 2013

As passive safety features for nuclear power plants receive increasing attention, various studies have been conducted to develop safety systems for 3rd-generation (GEN-III) nuclear power plants that are driven by passive systems. The Passive Auxiliary Feedwater System (PAFS) is one of several passive safety systems being designed for the Advanced Power Reactor Plus (APR+), and extensive studies are being conducted to complete its design and to verify its feasibility. Because the PAFS removes decay heat from the reactor core under transient and accident conditions, it is necessary to evaluate the heat removal capability of the PAFS under hypothetical accident conditions. The heat removal capability of the PAFS is strongly dependent on the heat transfer at the condensate tube in Passive Condensation Heat Exchanger (PCHX). To evaluate the model of heat transfer coefficient for condensation, the Multi-dimensional Analysis of Reactor Safety (MARS) code is used to simulate the experimental results from PAFS Condensing Heat Removal Assessment Loop (PASCAL). The Shah model, a default model for condensation heat transfer coefficient in the MARS code, under-predicts the experimental data from the PASCAL. To improve the calculation result, The Thome model and the new version of the Shah model are implemented and compared with the experimental data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.66-71
• /
• 2014

This paper presents an analog front-end integrated circuit (IC) for medical ultrasound imaging systems using standard $0.18-{\mu}m$ CMOS process. The proposed front-end circuit includes the transmit part which consists of 15-V high-voltage pulser operating at 2.6 MHz, and the receive part which consists of switch and a low-power low-noise preamplifier. Depending on the operation mode, the output driver in the transmit pulser can be reconfigured as the switch in the receive path and thus the area of the overall front-end IC is reduced by over 70% in comparison to previous work. The designed single-channel front-end prototype consumes less than $0.045mm^2$ of core area and can be utilized as a key building block in highly-integrated multi-array ultrasound medical imaging systems.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2009

As the information age comes out, the aspect of future war brings about the many changes in terms of war-fighting environment. Accordingly, information superiority and intelligence-centric warfare have been important and new war-fighting concept such as NCW(network centric warfare) have been turned up. This paper proposed all-weather core-strategy communications systems guaranteeing not only the real-time transmission of the information collected in a battlefield and expansion, automation, and rapidity of a battlefield but also broadband, mobility, survivability, and flexibility. The proposed military satellite communications system is classified into wideband mass capacity link, survivability, and the system supporting OTM(on the move) communication for the real-time transmission of battlefield information. This paper analyzed the essential operation concepts and core schemes of the U.S. Army's next generation system, TSAT(Transformational Satellite Communication System). Base on the analysis results, this paper proposed that the architecture of next generation military satellite communications systems for NCW have to provide the data rate, anti-jamming capability, network control and management capability which are optimally adaptable for the wireless channel environments such as jamming and interference and to support the variety of platforms like high-speed mobile vehicles, micromini devices, super-high speed unmanned aerial vehicles. Finally, this paper also proposed that next generation military satellite communications systems need the technologies such as the adaptable multi-antenna, laser link, and next-generation anti-jamming waveform.

• Journal of Information Processing Systems
• /
• v.5 no.2
• /
• pp.97-104
• /
• 2009

In this paper we propose a Differentiated Services Based Admission Control and Routing Algorithm for IPv6 (ACMRA). The basic DiffServ architecture lacks an admission control mechanism, the injection of more QoS sensitive traffic into the network can cause congestion at the core of the network. Our Differentiated Services Based Admission Control and Routing Algorithm for IPv6 combines the admission control phase with the route finding phase, and our routing protocol has been designed in a way to work alongside DiffServ based networks. The Differentiated Services Based Admission Control and Routing Algorithm for IPv6 constructs label switched paths in order to provide rigorous QoS provisioning. We have conducted extensive simulations to validate the effectiveness and efficiency of our proposed admission control and routing algorithm. Simulation Results show that the Differentiated Services Based Admission Control and Routing Algorithm for IPv6 provides an excellent packet delivery ratio, reduces the control packets' overhead, and makes use of the resources present on multiple paths to the destination network, while almost each admitted flow shows compliance with its Service Level Agreement.

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2007

Double injection molding process is very efficient molding-method for molding the products which is consist of multi-materials. Fuel-tube holder which is necessary for automobil power train and circulation systems is composed of plastic and rubber materials to minimize the vibration and pulsation noises. In existing process, fuel-tube holder was made by the insert molding process or assembly process after molding. If fuel-tube holder is manufactured by double injection molding process, it may be realize to improve the product quality, efficiency of molding-process and retrenchment of manufacturing cost. In this study, for manufacturing fuel-tube holder by double injection molding process, the analysis of joining characteristics between PA6(polyamide 6) and TPE(thermoplastic elastomer) was executed and the double injectin mold for molding fuel-tube holder with core toggle mechanism was fabricated. Finally, fuel-tube holder was molding using fabricated double injection mold.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.401-407
• /
• 2011

In order to enhance torque density of five-phase permanent magnetic synchronous motor with third harmonic injection for electric vehicles (EVs) applications, optimum seeking method for injection ratio of third harmonic was proposed adopting theoretical derivation and finite element analysis method, under the constraint of same amplitude for current and air-gap flux. By five-dimension space vector decomposition, the mathematic model in two orthogonal space plane, $d_1-q_1$ and $d_3-q_3$, was deduced. And the corresponding dual-plane vector control method was accomplished to independently control fundamental and third harmonic currents in each vector plane. A five-phase PMSM prototype with quasi-trapezoidal flux pattern and its fivephase voltage source inverter were designed. Also, the dual-plane vector control was digitized in a single XC3S1200E FPGA. Simulation and experimental results prove that using the proposed optimum seeking method, the torque density of five-phase PMSM is enhanced by 20%, without any increase of power converter capacity, machine size and iron core saturation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.7
• /
• pp.354-360
• /
• 2008

Power-related issues have become important considerations in current generation microprocessor design. One of these issues is that of elevated on-chip temperatures. This has an adverse effect on cooling cost and, if not addressed suitably, on chip reliability. In this paper we investigate the general trade-offs between temporal and spatial hot spot mitigation schemes and thermal time constants, workload variations and microprocessor power distributions. By leveraging spatial and temporal heat slacks, our schemes enable lowering of on-chip unit temperatures by changing the workload in a timely manner with Operating System (OS) and existing hardware support.