• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.165-167
• /
• 1994

This paper presents a new method for multiobjective optimization using Genetic Algorithm-Sexual Reproduction Model(SR model). In SR model, each individual consists of chromosome pairs. Sex cells(gametes) are produced through artificial meiosis in which crossover and mutation occur, The proposed method has two selection operators, one, individual selection which selects the individual to fertilize, and the other, gamete selection which makes zygote for offspring production, The two selection schemes are repectively conducted according to different fitness(or objective) function and consequently give a solution which is unbiased to any objectives. We apply the proposed method to optimization of the design parameters of Linear Induction Motor(LIM) and show its effectiveness.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.721-728
• /
• 1991

In this paper, a magneto-optic modulator has been designed by using single crystal BSO and polycrystal ZnSe as Faraday cells. And practical core-type optical current sensors using pure iron and permalloy have been prepared and experimented. In order to obtain efficient magnetic field detection, LED(NEC OD08358, 0.87 $\mu$m) was used as optical source, PIN-PD(OD-8454)as optical receiver and multi-mode optical fiber (100/140$\mu$m) as transmission line. The characteristics matrix of the optical element was calculated by Stokes parameter, and optic modulation characteristics equations were derived by Muller matrix. Electromagnetic analysis program (FLUX 2D, micro VAX 3600) by finite element method was used to find the magnetic flux density around the core. The measuring error of the output voltage to input current has been masured below 5% in the range of 50A to 1000A. As the temperature was changed from -20$^{\circ}C$ to 60$^{\circ}C$, the maximum measurement error of the optical output has been found to be 0.5% at 60$^{\circ}C$. These experimental results show good temperature and linearity characteristics. The SNR of the overall system was 47dB in case of 600A (250.2 Oe) conductor current and the system has good noise immunity.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.14-14
• /
• 2015

Cellular aspects of sooty mold on walnut leaves were investigated by using light and electron microscopy. A black coating developed on the adaxial leaf surface of a walnut tree. No infestations were found on the abaxial leaf surface with peltate glandular trichomes. Light microscopy showed that fungal complexes from the leaf surface were composed of brown conidia and hyphae. Conidia, with longitudinal and transverse septa, were variable in length ranging from 10 to $30{\mu}m$, and commonly found in clusters, forming microsclerotia. Neither epidermal penetration nor hyphal entrance to host tissues was observed. Based on their morphological characteristics, the fungal complexes were assumed to be Capnodium species. An electron-dense melanized layer was present on the cell wall of multi-celled conidia. Concentric bodies in the fungal cytoplasm had an electron-translucent core surrounded by an electron-dense margin with a fibrillar sheath. Chloroplasts without starch granules in the palisade mesophyll cells of sooty leaves had electron-dense stromata and swollen plastoglobuli. These results suggest that the epiphytic growth of fungal complexes can be attributed to the melanized layer and concentric bodies against a water-deficient environment on the leaf surface. Ultrastructural characteristics of the sooty leaves indicate typical features of dark-adapted and non-photosynthetic shade leaves.

• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.93-101
• /
• 2001

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods, guides cooling water, and protects the system from an external impact load, such as earthquakes. Therefore, the mechanical and structural properties of the spacer grids must be extensively examined while designing them. In this paper, a numerical method for predicting the buckling strength of spacer grids is presented. Numerical analyses on the buckling behavior of the spacer grids are performed for a various array of sizes of the grids considering that the spacer grid is an assembled structure with thin-walled plates and imposing proper boundary conditions by nonlinear dynamic finite element method using ABAQUS/Explicit. Buckling tests on several numbers of specimens of the spacer grid were also carried out in order to compare the results between the test and the simulation result. The drop test is accomplished by dropping a carriage on the specimen at a pre-determined position. From this test, the specimens are buckled only at the uppermost and the lowermost layer among the multi-cells, which is similar to the local buckling at the weakest point of the grid structure. The simulated results also similarly predicted the local buckling phenomena and were found to give good correspondence with the experimental values for the thin-walled grid structures.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.3
• /
• pp.143-148
• /
• 2018

In this study the performance and humidity variation for 2 unit cells connected in series were experimentally measured. The relative flow direction of hydrogen and air was changed from parallel flow to counter flow. Internal humidity distribution was then measured by 5 embedded sensors on each channel. In all experimental conditions, the former unit cell showed a better performance and the gap is noted to be higher when counter flow is applied. The performance was noted to be higher at high humidification case in the parallel flow. However, in the counter flow, the difference of performance according to the humidification is negligible. Hydrogen and air are discharged from the PEMFC unsaturated with water vapor at parallel flow/low humidification condition, which explains lower performance of the PEMFC than other conditions. The humidities in hydrogen and air streams of counter flow were noted to increase rapidly even at low humidification condition and the consequential even hydration of membrane is the reason of higher performance.

• Journal of the Optical Society of Korea
• /
• v.18 no.2
• /
• pp.174-179
• /
• 2014

Since in vitro neural recording and imaging applications based on a surface plasmon resonance (SPR) technique have expanded dramatically in recent years, cytotoxicity assessment to ensure the biosafety and biocompatibility for those applications is crucial. Here, we report the cytotoxicity of the SPR substrate incorporating a flint glass whose refractive index is larger than that of a conventional crown glass. A high refractive index glass substrate is essential in neural signal detection due to the advantages such as high sensitivity and wide dynamic range. From experimental data using primary hippocampal neurons, it is found that a lead-based flint glass is not appropriate as a neural recording template although the neuron cells are not directly attached to the toxic glass. We also demonstrate that the adhesion layer between the glass substrate and the gold film plays an important role in achieving the substrate stability and the cell viability.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.85-98
• /
• 2002

The purpose of this study is to develop a land use planning model (LUPM) which can be applied to development of rural villages considering their spatial expansion. The LUPM finds out and allocates the new built site required for the improvement of existing villages. in the development of LUPM, CA (cellular automata) and land suitability analysis methods were applied combinedly. The model uses basically numerical data of CIS based on grid data. Agglomerated settlement, as a type of village for simulation, was adopted. Probability of land use change for optimizing development area was calculated by the six criteria: slope. drainage characteristic, direction of slope, as absolute suitability of grid itself, distance from road. distance from stream and distance from the village center, as relative probability by neighborhood cells. Weighting values of these criteria were quantified by AHP (analytic hierarchy process) method, which is one of MCE(multi-criteria evaluation) method. The algorithm of the model was verified by three example villages: an isolation village, a village with horizontal road, and a village with nodal point of cross road

• Journal of Microbiology and Biotechnology
• /
• v.26 no.2
• /
• pp.432-439
• /
• 2016

Shiga toxins (Stxs) produced by Shiga toxin-producing Escherichia coli (STEC) strains are major virulence factors that cause fatal systemic complications, such as hemolytic uremic syndrome and disruption of the central nervous system. Although numerous studies report proinflammatory responses to Stx type 1 (Stx1) or Stx type 2 (Stx2) both in vivo and in vitro, none have examined dynamic immune regulation involving cytokines and/or unknown inflammatory mediators during intoxication. Here, we showed that enzymatically active Stxs trigger the dissociation of lysyl-tRNA synthetase (KRS) from the multi-aminoacyl-tRNA synthetase complex in human macrophage-like differentiated THP-1 cells and its subsequent secretion. The secreted KRS acted to increase the production of proinflammatory cytokines and chemokines. Thus, KRS may be one of the key factors that mediate transduction of inflammatory signals in the STEC-infected host.

• Archives of Pharmacal Research
• /
• v.28 no.11
• /
• pp.1251-1256
• /
• 2005

In this study, we evaluated the cytoprotective effects of antioxidative substances in hydrogen peroxide ($H_{2}O_{2}$) treated Mel-Ab melanocytes. Tested substances include selenium, quercetin, green tea (GT) extract, and several vitamins (ascorbic acid, Trolox, and folic acid). Of these, both quercetin and GT extract were found to have strong cytoprotective effects on $H_{2}O_{2}$­induced cell death. We also examined additive effects, but no combination of two of any of the above substances was found to act synergistically against oxidative damage in Mel-Ab cells. Nevertheless, a multi-combination of GT extract, quercetin, and folic acid appeared to prevent cellular damage in a synergistic manner, which suggests that combinations of antioxidants may be of importance, and that co-treatment with antioxidants offers a possible means of treating vitiligo, which is known to be related to melanocyte oxidative stress.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.45-50
• /
• 2018

Recently the water management department advised the water treatment industry to focus on deploy the chemical free and the environmentally responsible process to adopt on water treatment plants in every country. In this objective, water treatment process started using ultrasonic based phycocyanin extraction with fluorescence measurement techniques to detect the change in the yield of phycocyanin. This paper propose the design of optical filter model for fluorescence technique based immersive optical phycocyanin measurement sensor design. The proposed design uses the multi-wavelength sensor module for irradiating part, and this plays a role of removing a wavelength band other than 590 ~ 620 nm. The preliminary study on immersed phycocyanin sensor, the fluorescence value of picocyanin according to the ultrasonic intensity, treatment time and number of cells was measured using JM phycocyanin module to emulate the proposed design, and were compared performance of the proposed sensor emulation. In this design, the phycocyanin fluorescence value increased about 2.1 ~ 4.7 times as the ultrasonic treatment time increased as compared with JM phycocyanin module, and the phycocyanin fluorescence value within the analysis range was obtained by ultrasonic treatment within one minute.