• The Korean Journal of Applied Statistics
• /
• v.16 no.1
• /
• pp.55-69
• /
• 2003

In this article, we propose the weighted LAD (least absolute deviations) estimators for multi-dimensional contingency tables and drive an estimation method to estimate the proposed estimators. To illustrate the robustness of the estimators, simulation results are presented for several models Including log-linear models and models for ordinal variables in multidimensional contingency tables. Examples were also introduced.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.206-206
• /
• 2011

투명 전도성 산화물 (TCO, Transparent Conductive Oxide) 박막을 태양전지에 적용하기 위해서는 우수한 전기 전도성 및 가시광 영역에서 높은 투과율을 가져야 한다. 대표적인 TCO 물질인 ITO (Indium tin oxide) 박막은 우수한 전기적, 광학적 특성을 가지고 있지만 $400^{\circ}C$ 이상의 고온에서는 전기저항이 급격히 증가하게 되어 실제 태양전지 패널에 적용했을 때 전기적 특성이 저하된다. 따라서 태양전지용 TCO 박막을 개발 시, 뛰어난 고온 안정성이 요구되고 있다. 본 연구에서는 고온 안정적 특성을 지니는 Ga3+를 도핑한 ZnO 계열 TCO인 GZO/ITO multi-layered 박막을 증착하였다. 또한 buffer layer의 두께 변화 및 구조 제어를 통한 최위층 박막의 전기적 특성 및 결정성을 조사하였으며 다층 박막의 계면 간 특성 및 굴절률 제어를 통한 광학적 물성을 연구하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1876-1889
• /
• 2013

Packet-based mobile multimedia services for the Internet differ with respect to their resource requirements, performance objectives, and resource usage efficiencies. Nonetheless, each mobile terminal should support a variety of multimedia services, sometimes even simultaneously. This paper proposes a sub-channel allocation scheme based on multi-level priority for supporting mobile multimedia services in an Orthogonal Frequency Division Multiple Access (OFDMA) system. We attempt to optimize the system for satisfying the Quality of Service (QoS) requirements of users and maximize the capacity of the system at the same time. In order to achieve this goal, the proposed scheme considers the Signal-to-Interference-plus-Noise Ratio (SINR) of co-sub-channels in adjacent cells, the Signal-to-Noise Ratio (SNR) grade of each sub-channel in the local cell on a per-user basis, and the characteristics of the individual services before allocating sub-channels. We used a simulation to evaluate our scheme with the performance measure of the outage probabilities, delays, and throughput.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.834-841
• /
• 2014

This paper proposes new active switched-capacitor and switched-inductor Z-source inverter (ASC/SL-ZSI) topologies, which can provide a higher boost ability with a small shoot-through time. The proposed ASC/SL-ZSIs inherit all of the advantages of the classical ZSI, and have a stronger voltage boost inversion ability when compared with the classical ZSI. Thus, the output ac voltage quality is significantly improved. In addition, more cells can be cascaded in the impedance network in order to obtain a very high boost ability. The proposed topologies can be applied to photovoltaic or fuel-cell generation systems with low-voltage renewal sources due to their wide range of obtainable voltages. Both simulations and the experimental results are carried out in order to verify performance of the proposed topologies.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.1006-1010
• /
• 1995

This paper describes Sexual Reproduction Genetic Algorithm(SRGA) for function optimization. In SRGA, each individual utilize a diploid chromosome structure. Sex cells(gametes) are produced through artificial meiosis in which crossover and mutation occur. The proposed method has two selection operators, one, individual selection which selects the individual to fertilize, and the other, gamete selection which makes zygote for offspring production. We consider the effects of multi-selection and diploidy on search performance. SRGA improves local and global search(exploitation and exploration) and show optimum tracking performance in nonstationary environments. Gray coding is incorporated to transforming the search space and Genic uniform distribution method is proposed to alleviate the problem of premature convergence.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.169-177
• /
• 1999

The base shear force and the overturning moment are important factors for the earthquake design of a structure. These should be predicted exactly especially when the nonlinear seismic isolation bearings are used against earthquake motions. Generally these are derived by the acceleration responses of a structure with the he assumed masses. However these can be contaminated by the noise in the measured responses and the uncertainty of assumed masses. This paper presents the results of the derived base shear force and overturning moment compared with the measured results by multi-axis load cells. Also discussions are made on the cross-coupling effects of the multi-axis load cell.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.109-110
• /
• 2007

The sum-rate capacity of multi-antenna broadcast channels recently has attracted much research interests. However, those effort mainly has focused on a single-cell system. In this paper, we consider a multi-cell system where a transmitter uses zero-forcing beamforming with multiple antennas. We select a linear zero-forcing weight that maximizes the sum-rate when intercell interference exists. With numerical investigation, we will show the sum-rate gain achieved by the proposed method gets larger when the number of interfering cells increases.

• Journal of The Korean Astronomical Society
• /
• v.28 no.2
• /
• pp.223-243
• /
• 1995

We describe the implementation of a multi-dimensional numerical code to solve the equations for idea! magnetohydrodynamics (MHD) in cylindrical geometry. It is based on an explicit finite difference scheme on an Eulerian grid, called the Total Variation Diminishing (TVD) scheme, which is a second-order-accurate extension of the Roe-type upwind scheme. Multiple spatial dimensions are treated through a Strang-type operator splitting. Curvature and source terms are included in a way to insure the formal accuracy of the code to be second order. The constraint of a divergence-free magnetic field is enforced exactly by adding a correction, which involves solving a Poisson equation. The Fourier Analysis and Cyclic Reduction (FACR) method is employed to solve it. Results from a set of tests show that the code handles flows in cylindrical geometry successfully and resolves strong shocks within two to four computational cells. The advantages and limitations of the code are discussed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.213-221
• /
• 2003

In this paper, we consider a multi-objective part-machine grouping problem, in which part types have several alternative part routings and each part routing has a machining sequence. This problem is characterized as optimally determining part type sets and its corresponding machine cells such that the sum of inter-cell part movements and the sum of machine workload imbalances are simultaneously minimized. Due to the complexity of the problem, a two-stage heuristic algorithm is proposed, and experiments are shown to verify the effectiveness of the algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.2
• /
• pp.288-307
• /
• 2013

This paper formulates resource allocation for decode-and-forward (DF) relay assisted multi-cell orthogonal frequency division multiple (OFDM) networks as an optimization problem taking into account of inter-cell interference and users fairness. To maximize the transmit rate of system we propose a joint interference coordination, subcarrier and power allocation algorithm. To reduce the complexity, this semi-distributed algorithm divides the primal optimization into three sub-optimization problems, which transforms the mixed binary nonlinear programming problem (BNLP) into standard convex optimization problems. The first layer optimization problem is used to get the optimal subcarrier distribution index. The second is to solve the problem that how to allocate power optimally in a certain subcarrier distribution order. Based on the concept of equivalent channel gain (ECG) we transform the max-min function into standard closed expression. Subsequently, with the aid of dual decomposition, water-filling theorem and iterative power allocation algorithm the optimal solution of the original problem can be got with acceptable complexity. The third sub-problem considers dynamic co-channel interference caused by adjacent cells and redistributes resources to achieve the goal of maximizing system throughput. Finally, simulation results are provided to corroborate the proposed algorithm.