• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.18-27
• /
• 2015

Since a Compton camera has high detection sensitivity due to electronic collimation and a good energy resolution, it is a potential imaging system for nuclear medicine. In this study, we investigated the feasibility of a Compton camera for multi-tracer imaging and proposed a rotating Compton camera to satisfy Orlov's condition for 3D imaging. Two software phantoms of 140 and 511 keV radiation sources were used for Monte-Carlo simulation and then the simulation data were reconstructed by listmode ordered subset expectation maximization to evaluate the capability of multi-tracer imaging in a Compton camera. And the Compton camera rotating around the object was proposed and tested with different rotation angle steps for improving the limited coverage of the fixed conventional Compton camera over the field-of-view in terms of histogram of angles in spherical coordinates. The simulation data showed the separate 140 and 511 keV images from simultaneous multi-tracer detection in both 2D and 3D imaging and the number of valid projection lines on the conical surfaces was inversely proportional to the decrease of rotation angle. Considering computation load and proper number of projection lines on the conical surface, the rotation angle of 30 degree was sufficient for 3D imaging of the Compton camera in terms of 26 min of computation time and 5 million of detected event number and the increased detection time can be solved with multiple Compton camera system. The Compton camera proposed in this study can be effective system for multi-tracer imaging and is a potential system for development of various disease diagnosis and therapy approaches.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.72-77
• /
• 2021

This paper proposes a design and development plan for a control program for the MX-10 EO/IR camera. This camera is a piece of mission equipment mounted on the multi-purpose unmanned helicopter (MPUH) system. Operators must be able to control the necessary functions of the camera to perform their assigned tasks. To achieve this, the function to control the camera was analyzed, and a control program was developed. In addition, the control program was linked to a joystick for convenient operation of the camera by the operator.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.110-112
• /
• 2003

The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multispectral automatic Aerial photographic system. This system's Multi-spectral camera can catch the visible (RGB) and infrared (NIR) bands (3032${\ast}$2008 pixel) image. Our system consists of a thermal infrared camera and automatic balance control, and it managed and controlled by a palm-top computer. And it includes a camera gimbals system, GPS receiver, weather sensor and etc. As a result, we have successfully tested its ability to acquire aerial photography, weather data, as well as GPS data, making it a very flexible tool for environmental data monitoring.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.197-200
• /
• 2011

In this paper, we propose a multi-view stereoscopic image synthesis algorithm for 3DTV system using depth information with an RGB texture from a depth camera. The proposed algorithm synthesizes multi-view images which a virtual convergence camera model could generate. Experimental results showed that the performance of the proposed algorithm is better than those of conventional methods.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1025-1032
• /
• 2022

In this paper, the TDMA-based PoE wireless multi-IP camera transmission system using wireless communication technology is developed to reduce the burden of construction costs caused by the existing wired-based CCTV surveillance system and IP camera system. It intends to design and implement the long-distance wireless transmission technology of video. The transmission/reception prototype of the line IP transmission system and the wireless multi-IP camera transmission terminal and image acquisition device (SB-200) for the proposed related technology were described.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.50-53
• /
• 2003

본 논문에서는 multi-camera를 이용한 인터넷 기반의 지능적 감시 시스템을 제안한다. 제안된 시스템은 두 종류의 카메라, static camera와 pan-tilt camera, 를 이용하여 출입구를 감시하고, 비인가자를 추적한다. static camera는 출·입을 검출하고 출입자를 인가자와 비인가자로 분류하는데 이용되고, pan-tilt camera는 비인가자로 분류된 출입자를 추적하는데 이용된다. 제안된 시스템은 세 가지 단계: 출입구 감시, 출입자 검출 및 분류(인가자/비인가자), 비인가자 추적으로 구성된다 출입구 감시는 출입문의 밝기값 변화를 이용한다 출입자 검출 및 분류는 skin color 모델과 얼굴 크기, 위치와 관련된 휴리스틱을 이용하여 얼굴을 검출하고, PCA(Principal Component Analysis)를 이용한 eigenspace상에서의 유클리디언 디스턴스로 템플릿 얼굴과 입력 얼굴의 유사도를 계산하여 인가자인지 비인가자인지 분류한다. 비인가자 추적은 pan-tilt 카메라를 이용하여, static camera에서 분류된, 비인가자의 움직임을 검출하고 카메라를 제어함으로써 추적한다 제안된 시스템은 무인 감시 상황에서 비인가자의 출입시 감시자에게 경고 신호를 제공하고, 감시지역에서 사건 발생시, 사건의 개요를 파악하는 중요한 정보를 빠른 시간에 제공할 수 있다는 장점을 가진다.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.281-282
• /
• 2007

In this paper, we propose a method for digital matting using a multi-view camera system. In order to generate multi-view synthetic aperture images, we first move all images obtained from the multi-view camera according to their disparities. After we obtain corresponding trimaps by taking a variance of the synthetic aperture images, we convert the trimaps into multi-view alpha mattes. Experimental results show that the proposed scheme can create the composite images successfully by combining foreground objects with multi-view background images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.351-357
• /
• 2008

An aerial multi-looking camera system equips itself with five separate cameras which enables acquiring one vertical image and four oblique images at the same time. This provides diverse information about the site compared to aerial photographs vertically. The geometric relationship of oblique cameras and a vertical camera can be modelled by 6 exterior orientation parameters. Once the relationship between the vertical camera and each oblique camera is determined, the exterior orientation parameters of the oblique images can be calculated by the exterior orientation parameters of the vertical image. In order to examine the exterior orientation of both a vertical camera and each oblique cameras in the multi-looking camera relatively, calibration targets were installed in a lab and 14 images were taken from three image stations by tilting and rotating a non-metric digital camera. The interior orientation parameters of the camera and the exterior orientation parameters of the images were estimated. The exterior orientation parameters of the oblique image with respect to the vertical image were calculated relatively by the exterior orientation parameters of the images and error propagation of the orientation angles and the position of the projection center was examined.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2023

In this paper, the design and implementation of the long-distance wireless transmission technology of high-definition video using domestic wireless communication technology for the existing wired-based CCTV surveillance system and IP camera system was evaluated for performance. The interworking test between the wireless multi-IP camera transmission terminal device and the wireless communication RF module, and the wireless multi-IP camera-based video transmission system integration interworking test confirm the module interworking suitability during video transmission.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.53-56
• /
• 2010

An aerial multi-looking camera system equips itself with five separate cameras which enables acquiring one vertical image and four oblique images at the same time. This provides diverse information about the site compared to aerial photographs vertically. However, multi-looking Aerial Camera for building a 3D spatial information don't use a large-size CCD camera, do uses a medium-size CCD camera, if acquiring forward, backward, left and right imagery of Certain objects, Aerial photographing set overlap and sidelap must be considered. Especially, Sideward-looking camera set up by the sidelap to determine whether a particular object can be acquisition Through our research we analyzed of sideward footprint and aerial photographing efficiency of Multi-view imagery by sidelap changing.