• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.57-60
• /
• 2004

This paper presents multibit Sigma-Delta ADC using Leslie-Singh Structure to Improve nonlinearity of feedback loop. 4-bit flash ADC for multibit Quantization in Sigma Delta modulator offers the following advantages such as lower quantization noise, more accurate white-noise level and more stability over single quantization. For the feedback paths consisting of DAC, the DAC element should have a high matching requirement in order to maintain the linearity performance which can be obtained by the modulator with a multibit quantizer. Thus a Sigma-Delta ADC usually adds the dynamic element matching digital circuit within feedback loop. It occurs complexity of Sigma-Delta Circuit and increase of power dissipation. In this paper using the Leslie-Singh Structure for improving nonliearity of ADC. This structure operate at low oversampling ratio but is difficult to achieve high resolution. So in this paper propose improving loop filter for single-bit feedback multi-bit quantization Sigma-Delta ADC. It obtained 94.3dB signal to noise ratio over 615kHz bandwidth, and 62mW power dissipation at a sampling frequency of 19.6MHz. This Sigma Delta ADC is fabricated in 0.25um CMOS technology with 2.5V supply voltage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.5
• /
• pp.461-474
• /
• 2009

The cognitive radio (CR) technique is a useful tool for improving spectrum utilization by detecting and using the vacant spectrum bands in which cooperative spectrum sensing is a key element, while avoiding interfering with the primary user. In this paper, we propose a novel cluster-based cooperative spectrum sensing scheme in cognitive radio with two solutions for the purpose of improving in sensing performance. First, for the cluster header, we use the double adaptive energy thresholds and a multi-bit quantization with different quantization interval for improving the cluster performance. Second, in the common receiver, the weighed HALF-voting rule will be applied to achieve a better combination of all cluster decisions into a global decision.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.529-532
• /
• 2010

Multi-carrier demultiplexer/demodulator (MCDD) in an on-board processing (OBP) satellite used for digital multimedia services has two typical architectures according to the channel demultiplexing procedure: Multistage multi-carrier demultiplexer (M-MCD) or poly-phase fast Fourier transform (PPF). During the channel demultiplexing, phase and quantization errors influence the performance of MCDD; those errors affect the bit error rate (BER) performance of M-MCD and PPF differently. In this paper, we derive the phase error variances that satisfy the condition that M-MCD and PPF have the same signal to noise ratio according to quantization bits, and then, with these results, analyze the BER performances of M-MCD and PPF. The results provided here may be a useful reference for the selection of M-MCD or PPF in designing the MCDD in an OBP satellite communications system.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.216-219
• /
• 2003

In this paper, we present performance analysis of an IEEE P802.15.3a high rate wireless personal area network transceiver. This physical layer standard uses QOSK as its sub-channel modulation scheme and orthogonal frequency domain modulation (OFDM) for sub-bands. OFDM is used for each sub-band so that multi-path effects are absorbed by equalizer and guard, and fading can be approximately modeled as additive white Gaussian noise. In multi-band ultra-wideband system, DAC quantization error is important noise source since high resolution conversion cannot be used due to high power consumption. Simulation result shows that, to get 640-Mbps throughput, at least 5-bits precision is necessary to maintain bit-error rate under 10$\^$-2/, which can be lowered, with channel coding, to 10$\^$-6/ that is the bit-error rate required by IEEE 802.15 upper protocol layer, in 4-meter LOS fading channel.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.237-246
• /
• 2016

DIBR (Depth Image Based Rendering) is a multimedia technology that generates the virtual multi-view images using a color image and a depth image, and it is used for creating glasses-less 3-dimensional display contents. This research describes the effect of depth accuracy about the objective quality of DIBR-based multi-view images. It first evaluated the minimum depth quantization bit that enables the minimum distortion so that people cannot recognize the quality degradation. It then presented the comparative analysis of non-uniform domain-division quantization versus regular linear quantization to find out how effectively express the accuracy of the depth information in same quantization levels according to scene properties.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.2
• /
• pp.93-99
• /
• 2012

For speech coding, a vocal tract is modeled using Linear Predictive Coding (LPC) coefficients. The LPC coefficients are typically transformed to Line Spectral Frequency (LSF) parameters which are advantageous for linear interpolation and quantization. If multidimensional LSF data are quantized directly using Vector-Quantization (VQ), high rate-distortion performance can be obtained by fully utilizing intra-frame correlation. In practice, since this direct VQ system cannot be used due to high computational complexity and memory requirement, Split VQ (SVQ) is used where a multidimensional vector is split into multilple sub-vectors for quantization. The LSF parameters also have high inter-frame correlation, and thus Predictive SVQ (PSVQ) is utilized. PSVQ provides better rate-distortion performance than SVQ. In this paper, to implement the optimal predictors in PSVQ for voice storage devices, we propose Multi-Frame AR-model based SVQ (MF-AR-SVQ) that considers the inter-frame correlations with multiple previous frames. Compared with conventional PSVQ, the proposed MF-AR-SVQ provides 1 bit gain in terms of spectral distortion without significant increase in complexity and memory requirement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.822-833
• /
• 1996

The video coding for very low bit rate has recently received considerable attention, but conventional block based transform coding schemes suffer from the blocking effect for the constraints of bit rates. In this paper, we present a video coding sysem suing multi-resolution motion estimation/compensation with variable size block(VMRME/C) and multi-resolution vector quantization(MRVQ) in wavelet transform domain for very low bit rate coding. It is shown that the presented scheme has better performance in the peak signal-to-nose ratio(RSNR) by 0.2-0.6 dB as well as subjective quality than that of conventional block based transform video coding techniques(especially, H. 263 which is DCT based video coding).

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.33-42
• /
• 1997

In this paper, a video coding method in wavelet transformed multi-resolution image using variable block sized motion estimation and multi-codebook is proposed. In the propoed method, the accuracy of motion estimation is increased by using variable block matching algorithm based on edge type of blocks which estimation is increased by using variable block matching algoritm based on edge type of blocks which is classified accoridng to the magnitude of wavelet coefficients in vertical subband and horizontal subband of the highest layer. Also, we increased the flexibility of bit allocation and decreased vector quantization error for motion compensated error transmission by using importance of each subband. Some experimental results confirm that he proposed mothod has fine reconstructed images without blocking effect at low bit rate, and especially reconstructs edges well to which human eyes are sensitive.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.136-146
• /
• 2008

We proposed an adaptive steganography of an optical image using bit-planes and multichannel characteristics. The experiment's purpose was to compare the most popular methods used in optical steganography and to examine their advantages and disadvantages. In this paper we describe two digital methods: the first uses less significant bits(LSB) to encode hidden data, and in the other all blocks of $n{\times}n$ pixels are coded by using DCT(Digital Cosine Transformation), and two optical methods: double phase encoding and digital hologram watermarking with double binary phase encoding by using IFTA(Iterative Fourier Transform Algorithm) with phase quantization. Therefore, we investigated the complexity on bit plane and data, similarity insert information into bit planes. As a result, the proposed method increased the insertion capacity and improved the optical image quality as compared to fixing threshold and variable length method.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.232-235
• /
• 2010

This paper proposes an efficient depth-map coding method. The adaptive block-based depth-map coding method decides the number of bit planes to be encoded according to the quantization parameters to obtain the desired bit rates. So, the depth-map coding using the block-based decision of the bit-plane to be encoded proposes to free from the constraint of the quantization parameters. Simulation results show that the proposed method, in comparison with the adaptive block-based depth-map coding method, improves the average BD-rate savings by 3.5% and the average BD-PSNR gains by 0.25dB.