• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.19-24
• /
• 2007

This paper presents a performance analysis of dynamic channel allocation (DCA) based on the greedy approach (GA) for orthogonal frequency division multiple access (OFDMA) systems over Rayleigh fading channels. The GA-based DCA achieves its performance improvement using multi-user diversity. We analyze the statistics of the number of allocable users (NAU), which represents the multi-user diversity order at each allocation process. The derived statistics are then used to analyze the performance of GA-based DCA. The analysis results show that the number of subcarriers allocated to each user must be equal to achieve the maximum system performance (i.e., based on outage probability and data throughput).

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1328-1331
• /
• 1996

The importance of training for NC, CNC and Machining Center has been greatly increased. This paper presents implementation of a DNC system and operating software for educational purpose. This system is able to connect 8-32 CNCs to Control PC with RS232 multi-port serial card. Therefore, it allows much efficiency in training even after costs are considered. The KISCO DNC S/W for above system includes various communication function, communication parameter setting, program editor, tool management and user-friendly environment.

• The KIPS Transactions:PartB
• /
• v.10B no.1
• /
• pp.13-20
• /
• 2003

As it increase electronic commerce user rapidly, it is necessary to study on Improvement of performance for electronic commerce system. This paper suggests electronic commerce system using functionally distributed structure based on multi-agent and evaluate it's performance using prototype. In the suggested system, we use multi-agent using combined reasoning to offer a proper commodity information and meet the customer's requirement. And we can reduce load of the electronic commerce system with distribute agents both main server system and local server system functionally. In experiment result, we can confirm suggested electronic commerce system can prevent customer's unexpected long waiting causes by network traffic and server load, and can improve efficiency.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.6
• /
• pp.269-276
• /
• 2015

The today's rapid spread of smartphones makes it easier to use SNS. However, it reveals only their daily life or interest. Therefore, it is hard to really get to know the detailed part of multi-user's common interests. This paper proposes a content recommendation system which recommends people wanted by identifying common interests through SNS. Recommendation system includes proposal formula considering people wanted and deviation in group. After simulation, the proposed system provide high-quality adapted contents to many users by recommendation item according to the common interest. Number of cases about formula are four. It recommend contents that they have many number of 'like' and few number of deviation in users. The proposed system proves by simulations of four cases and read user's 'likes' data. It provide high-quality adapted contents to many users by recommendation item according to the common interest.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5162-5168
• /
• 2013

Hopping sequences of Time Hopped Ultra Wideband Impulse Radio (TH-UWB-IR) system are to mitigate multipath fading and to provide the multiple access chances for multi users. For the reliable communications, the same pulses are repeatedly transmitted for a bit duration based on hopping sequences. The proposed decoding scheme utilizes the intervals of inter-codes in a frame where the short interval between two pulses leads to the large interference by the multipath fading. For a single user case, the proposed method obtains 0.5dB gain over the conventional method at BER=$10^{-3}$. Decoding performance of repeated pulses can be increased using the property of the hopping sequences of multi users.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.295-306
• /
• 2023

This paper presents a multi-frequency and multi-constellation Global Navigation Satellite System (GNSS) signal generator that simulates intermediate frequency level digital signal samples for testing GNSS receivers. GNSS signal generators are ideally suited for testing the performance of GNSS receivers and algorithms under development in the laboratory for specific user locations and environments. The proposed GNSS signal generator features a fully-reconfigurable structure with the ability to adjust signal parameters, which is beneficial to generate desired signal characteristics for multiple scenarios including multi-constellation and frequencies. Successful signal acquisition, tracking, and navigation are demonstrated on a verified Software Defined Radio (SDR) in this study. This work has implications for future studies and advances the research and development of new GNSS signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2963-2978
• /
• 2017

The Top-K query is currently played a key role in a wide range of road network, decision making and quantitative financial research. In this paper, a Top-K recommendation algorithm is proposed to solve the cold-start problem and a tag generating method is put forward to enhance the semantic understanding of the OLAP session. In addition, a recommendation system for OLAP sessions called "OLAP4R" is designed using collaborative filtering technique aiming at guiding the user to find the ultimate goals by interactive queries. OLAP4R utilizes a mixed system architecture consisting of multiple functional modules, which have a high extension capability to support additional functions. This system structure allows the user to configure multi-dimensional hierarchies and desirable measures to analyze the specific requirement and gives recommendations with forthright responses. Experimental results show that our method has raised 20% recall of the recommendations comparing the traditional collaborative filtering and a visualization tag of the recommended sessions will be provided with modified changes for the user to understand.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.5
• /
• pp.423-443
• /
• 2009

We present the design and implementation of a unique sensing and actuation application -- the Illuminator: a sensor network-based intelligent light control system for entertainment and media production. Unlike most sensor network applications, which focus on sensing alone, a distinctive aspect of the Illuminator is that it closes the loop from light sensing to lighting control. We describe the Illuminator's design requirements, system architecture, algorithms, implementation and experimental results. The system uses the Illumimote, a multi-modal and high fidelity light sensor module well-suited for wireless sensor networks, to satisfy the high-performance light sensing requirements of entertainment and media production applications. The Illuminator system is a toolset to characterize the illumination profile of a deployed set of fixed position lights, generate desired lighting effects for moving targets (actors, scenic elements, etc.) based on user constraints expressed in a formal language, and to assist in the set up of lights to achieve the same illumination profile in multiple venues. After characterizing deployed lights, the Illuminator computes optimal light settings at run-time to achieve a user-specified actuation profile, using an optimization framework based on a genetic algorithm. Uniquely, it can use deployed sensors to incorporate changing ambient lighting conditions and moving targets into actuation. Experimental results demonstrate that the Illuminator handles various high-level user requirements and generates an optimal light actuation profile. These results suggest that the Illuminator system supports entertainment and media production applications.