• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.679-684
• /
• 2005

There are a few representative wireless network access technologies used widely. WWAN is celluar based telecommunication networks supporting high mobility, WLAN ensures high data rate within hotspot coverage, and WDMB support both data and broadcasting services correspondingly. However, these technologies include some limitations especially on the mobility, data rate, transmission direction, and so on. In order to overvome these limitations, there are various studies have been proposed in terms of 'Vortical Handoff' that offers seamless connectivity by switching active connection to the appropriate interface which installed in the mobile devices. In this paper, we propose the interface selection algorithm and network architecture to maximize the life time of entire system by minimizing the unnecessary energy consumption of another interfaces such as WLAN, WDMB that are taken in the user equipment. In addition, by using the results of analyzing multiple types of traffic and managing user buffer as a metric for vertical handoff, we show that the energy efficiency of our scheme is $75\%$ and $34\%$ than typical WLAN for WDMB and WLAN preferred schemes, correspondingly.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.17-26
• /
• 2002

In this paper, we have analyzed the BER (Bit Error Rate) performance of multi-user detectors employing SIC(Successive Interference Cancellation) and PIC (Parallel Interference Cancellation) which are the representative schemes in the subtractive interference cancellation. We have considered the MUD structure employing HIC (Hybrid Interference Cancellation) which combines SIC with PIC scheme, and then analyzed the BER performance. We have evaluated the BER performance of SIC and HIC schemes which execute the soft decision to generate the tentative data bit for the purpose of the interference cancellation in MAI and noise environments. Through the numerical analysis and computer simulation, it is shown that HIC can remove the effect of MAI more efficiently than the others, that improve the BER performance and increase the capacity of DS-CDMA systems regardless of the power control conditions. The reason is that the SIC scheme in front of HIC can solve the near-far problem caused by the imperfect power control and PIC scheme in the rear of it can improve the performance much more.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.183-191
• /
• 2021

Non-intrusive load monitoring is a technology that can be used for predicting and classifying the type of appliances through real-time monitoring of user power consumption, and it has recently got interested as a means of energy-saving. In this paper, we propose a system for classifying appliances from user consumption data by combining GAF(Gramian angular field) technique that can be used for converting one-dimensional data to the two-dimensional matrix with convolutional neural networks. We use REDD(residential energy disaggregation dataset) that is the public appliances power data and confirm the classification accuracy of the GASF(Gramian angular summation field) and GADF(Gramian angular difference field). Simulation results show that both models showed 94% accuracy on appliances with binary-state(on/off) and that GASF showed 93.5% accuracy that is 3% higher than GADF on appliances with multi-state. In later studies, we plan to increase the dataset and optimize the model to improve accuracy and speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.192-199
• /
• 2000

The design of multi-stage gear drives is a time-consuming process because it includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has no determine the number of reduction stages and the gear ratios of each reduction stage. In addition, the design problems include not only dimensional design but also configuration design of gear drive elements. There is no definite rule or principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer, and consequently result in undesirable design solution. A new and generalized design algorithm has been proposed to support the designer at the preliminary phase of the design of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, the user determines the number of reduction stages. In the second step, gear ratios of every stage are chosen using the random search method. The values of the basic design parameters of a gear are chose in the third step by using the generate and test method. Then the values of the dimensions, such as pitch diameter, outer diameter and face width, are calculated for the configuration design in the next step. The strength and durability of each gear is guaranteed by the bending strength and the pitting resistance rating practices by using AGMA rating formulas. In the final step, the configuration design is carried out using simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume (size) of a gearbox while avoiding interferences between them. These steps are carried out iteratively until a desirable solution is acquired. The proposed design algorithm is applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution has considerably good results in both aspects of the dimensional and the configuration design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1358-1366
• /
• 2001

Variable Processing Variable Processing Gain 기법을 기반으로 하는 Multirate-DS/CDMA 시스템에서는 다중 사용자 간섭뿐만 아니라, 불완전한 전력제어로 인해 발생되는 현재 이동 통신 시스템에서의 원근효과와 유사한 간섭이 다른 데이터율 사용자 신호들 사이에서 발생하게 된다. 이러한 간섭은 이동통신 시스템 성능을 저하시키고, 용량을 감소시키게 되므로 이들 간섭을 효과적으로 제거할 수 있는 다중 사용자 검출 기법이 절실히 요구된다. 따라서 본 논문에서는 이러한 다중 사용자 간섭과 원근 효과를 효과적으로 제거하기 위한 하이브리드 다중 사용자 간섭 제거 기법을 제안한다. 하이브리드 다중 사용자 간섭 제거 기법은 하나 이상의 다중 사용자 검출 기법을 포함한다. 제안된 하이브리드 다중 사용자 간섭 제거 기법의 성능을 평가하기 위해 본 논문에서는 기존의 단일사용자 검출 기법 및 다중 사용자 검출 기법을 다시 한번 살펴보고, 이들 기존 검출기와 제안된 검출기를 컴퓨터 모의 실험을 통해 그 성능을 비교한다. 모의 실험에서는 AWGN 환경에서 각 SNR[dB]에 따른 BER 곡선을 조사하였다. 모의실험 결과로부터 기존의 병렬 간섭 제거 기법이나 역 상관 검출기보다 제안된 하이브리드 다중 사용자 간섭 제거 기법이 우수한 성능을 갖음을 알 수 있었다. 이는 어느 정도의 복잡도와 시간 지연에 대한 대가이다. 하지만 이 시간 지연은 검출구간을 고 데이터율 사용자 그룹에 맞춤으로써 어느 정도 해결될 것으로 보인다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.295-299
• /
• 2007

Today, ubiquitous technology (e.g. computers or networked devices pervade everywhere we are) has enlarged by great advancement of information and communication technologies. If ubiquitous technologies is applied to, innovation of spatial information technology is expected. traditional spatial information technologies such as survey, GIS, GPS, LBS, and RS and ubiquitous technology gradual1y have been converged. The aim of this study is to create shared visions in spatial information technologies by scenario based roadmapping. So, we surveyed the state of the art in main spatial information technologies, market status and patent map. Consequently, prospects of spatial information technologies is suggested. The aim of 1st and 2nd NGIS project focused on map supplier was to develop digital map(e.g. framework data, various thematic map). As a result, the best technology of digital mapping is achieved in the world. But, there is not enough to develop GIS and LBS solution. Current market in GIS S/W and Telematics is about 384billon won and 250billion won. a patent is applied in the order, like a USA(1571case, 47%), Japan(883case, 26%), EU(478case, 14%), Korea(446case, 13%). In the future, spatial information technology fused on ubiquitous technology will be focused on user's demand and developing convenience context. The developing target will be realtime monitoring of 3D spatial data based on high resolution coordinate system, sharing and supplying multi-sensor data considered users demand, location service by ubiquitous technologies.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.1
• /
• pp.72-79
• /
• 2007

This paper will analysis the Jam-O-Drum developed for collaborative musical experience at first. And we suggest the multi-user interactive game system Kom-O-Drum(Korean Jam-O-Drum) as a Serious Game Platform By combining velocity, direction and touch sensitive input devices like a korea traditional drum "Jang Go" and computer graphics imagery into an LCD or PDP display up to four simultaneous players are able to participate in a collaborative approach to game's mission. Also we introduce the design of detail input device and application fields of Kom-O-Drum for Serious Game.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1837-1860
• /
• 2020

We propose a general framework for studying resource allocation problem and the tradeoff between spectral efficiency (SE) and energy efficiency (EE) for downlink traffic in power domain-non-orthogonal multiple access (PD-NOMA) and device to device (D2D) based heterogeneous cloud radio access networks (H-CRANs) under imperfect channel state information (CSI). The aim is jointly optimize radio remote head (RRH) selection, spectrum allocation and power control, which is formulated as a multi-objective optimization (MOO) problem that can be solved with weighted Tchebycheff method. We propose a low-complexity algorithm to solve user association, spectrum allocation and power coordination separately. We first compute the CSI for RRHs. Then we study allocating the cell users (CUs) and D2D groups to different subchannels by constructing a bipartite graph and Hungrarian algorithm. To solve the power control and EE-SE tradeoff problems, we decompose the target function into two subproblems. Then, we utilize successive convex program approach to lower the computational complexity. Moreover, we use Lagrangian method and KKT conditions to find the global optimum with low complexity, and get a fast convergence by subgradient method. Numerical simulation results demonstrate that by using PD-NOMA technique and H-CRAN with D2D communications, the system gets good EE-SE tradeoff performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.205-213
• /
• 2003

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. It has two main merits which are to cut down energy by reducing weight and to prevent explosive damage preceding to the sudden bursting which is generated by the pressure leakage condition. Therefore, Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field such as defense industry, aerospace industry and rocket motor case where lightweight and the high pressure are demanded. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS, general commercial software, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.