• Journal of Digital Convergence
• /
• 제14권8호
• /
• pp.305-311
• /
• 2016

If the automated image calibration system is performed in the position of non-experts, an expert will be required in every case inefficiently. But this requires an expert only when absolutely necessary. As well as the rapid system operation and efficient workforce can be managed. Image correction to perform projector inspection and management skills and to filter SW plug-in correction is that special theater system maintenance is not only managed efficiently, but also combined image analysis techniques can improve the technical perfection. This paper is to minimize the economic loss by developing a 10-bit High-depth and high-resolution $360^{\circ}$ projection image analysis technique and is to development of the special theater calibration system to effectively support quality.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제39권5호
• /
• pp.535-543
• /
• 2002

In this paper, we propose a new gaze detection method using 2-D facial images captured by a camera on top of the monitor. We consider only the facial rotation and translation and not the eyes' movements. The proposed method computes the gaze point caused by the facial rotation and the amount of the facial translation respectively, and by combining these two the final gaze point on a monitor screen can be obtained. We detected the gaze point caused by the facial rotation by using a neural network(a multi-layered perceptron) whose inputs are the 2-D geometric changes of the facial features' points and estimated the amount of the facial translation by image processing algorithms in real time. Experimental results show that the gaze point detection accuracy between the computed positions and the real ones is about 2.11 inches in RMS error when the distance between the user and a 19-inch monitor is about 50~70cm. The processing time is about 0.7 second with a Pentium PC(233MHz) and 320${\times}$240 pixel-size images.

• The Bulletin of The Korean Astronomical Society
• /
• 제41권1호
• /
• pp.65.1-65.1
• /
• 2016

We present results of long-term multi-wavelength polarization observations of the powerful blazar 3C 279 after its ${\gamma}$-ray flare on 2013 December 20. We followed up this flare by means of single-dish polarization observations with two 21-m telescopes of the Korean VLBI Network, carried out weekly from 2013 December 25 to January 11, and at 22, 43, and 86 GHz, simultaneously. These observations were part of the Monitoring Of GAmma-ray Bright AGNs (MOGABA) program. We Measured 3C 279 total flux densities at 22, 43, and 86 GHz, showing a mild variability of a factor of ${\leq}50%$ over the period of our observations. The spectral index ranged from -0.13 to -0.36 at between 22 and 86 GHz. The degree of linear polarization was in the range of 6 ~ 12 %, and slightly decreased with time at all frequencies. We found Faraday rotation measures (RM) of -300 to $-1200rad\;m^{-2}$ between 22 and 43 GHz, and -800 to $-5100rad\;m^{-2}$ between 43 and 86 GHz. The RM values follow a power law ${\mid}RM{\mid}{\propto}{\nu}^{\alpha}$, with a mean ${\alpha}$ of 2.2, implying that the polarized emission at these frequencies travels through a Faraday screen in or near the jet. We conclude that the regions emitting polarized radio emission may be different from the region responsible for the 2013 December ${\gamma}$-ray flare, and that these regions are maintained by the dominant magnetic field perpendicular to the direction of the radio jet at milliarcsecond scales.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.667-670
• /
• 2005

As security and surveillance have become the center of interest, remote controlled CCTV(Closed-Circuit Television) market has been formed while rapid development of digital image compression technology and Internet triggered the advent of web cameras. The characteristic of web camera is that it can provide users with higher quality image than CCTV at any place where Internet access is available. However, As for the system administrator, the existing web camera have disadvantage in that they allows users only. who are connected to the server of the web camera, to see the image from it. In this paper, in order to make up for this defect, designed multi-vision interface showing multi images on single screen and, for the purpose of the improvement in efficiency, the functions of saving images and of scheduling the time to save the images.

• Journal of Information Technology and Architecture
• /
• 제9권1호
• /
• pp.57-66
• /
• 2012

Recently, with a rapidly growing of the mobile content market, a variety of mobile-based applications are being launched. But mobile devices, compared to the average computer, take a lot of effort and time to get the final contents you want to use due to the restrictions such as screen size and input methods. To solve this inconvenience, a recommender system is required, which provides customized information that users prefer by filtering and forecasting the information.In this study, an tailored multi-information recommendation system utilizing a Personalized information recommendation system on smartphone is proposed. Filtering of information is to predict and recommend the information the individual would prefer to by using the user-based collaborative filtering. At this time, the degree of similarity used for the user-based collaborative filtering process is Euclidean distance method using the Pearson's correlation coefficient as weight value.As a real applying case to evaluate the performance of the recommender system, the scenarios showing the usefulness of recommendation service for the actual restaurant is shown. Through the comparison experiment the augmented reality based multi-recommendation services to the existing single recommendation service, the usefulness of the recommendation services in this study is verified.

• Journal of Information Technology Applications and Management
• /
• 제11권2호
• /
• pp.179-190
• /
• 2004

This paper describes the design of hacking prevention systems using a smart card. It consists of two parts, i.e., PC authentication and Keyboard-buffer hacking prevention. PC authentication function is a procedure to handle the access control to the target PC. The card's serial number is used for PIN(Personal Identification Number) and is converted into hash-code by SHA-1 hash-function to verify the valid users. The Keyboard-buffer hacking prevention function converts the scan codes into the encoded forms using RSA algorithm on the Java Card, and puts them into the keyboard-buffer to protect from illegal hacking. The encoded information in the buffer is again decoded by the RSA algorithm and displayed on the screen. in this paper, we use RSA_PKCS#1 algorithm for encoding and decoding. The reason using RSA technique instead of DES or Triple-DES is for the expansion to multi-functions in the future on PKI. Moreover, in the ubiquitous computing environment, this smart card security system can be used to protect the private information from the illegal attack in any computing device anywhere. Therefore, our security system can protect PC user's information more efficiently and guarantee a legal PC access authority against any illegal attack in a very convenient way.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.643-647
• /
• 2008

ACE (Advanced Collaboration Environment) [1] aims to provide people to have remote collaboration as they are in the same Space. To provide tele-presence in remote collaboration, quality of audio and sharing of view which can show overall environment. Visual Sharing focuses on providing interactive view sharing among remote participants. A user can see remote collaboration space from any direction and can share his working screen view with others. In this paper, we summarize the development plan of Visual Sharing and relevant elementary techniques for developing Visual Sharing.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.790-794
• /
• 2008

This paper proposes a educational content display system based on spatial augmented reality with a multi-touch screen for effective learning with intuitive interaction. It is hardly expected that the existing display systems have major learning effects because the user-system interaction can only be achieved through buttons or switches, In contrast, the system proposed by this paper ensures more effective interaction through the user's movement, not through buttons or switches. This system uses a spatial augmented reality method to display images, thereby attracting the users' attention. In addition, it ensures the effective dissemination of information by providing visual images that are more realistic.

• Journal of Korean Association for Spatial Structures
• /
• 제19권4호
• /
• pp.103-110
• /
• 2019

The cable-based retractable membrane roof makes it impossible to maintain its shape and stiffness during driving process, unlike the hard-type retractable roof. Consequently, monitoring using a relatively simple wireless video transmission device is required. However, since video data has a bigger transmission rating than other monitoring data in terms of the structure velocity or acceleration, there is a need to develop transmission device that is easy to install and entails low maintenance cost. This paper studies on a real-time video transmission system for monitoring the cable-based retractable membrane roof while driving. A video transfer software, using the mobile network, is designed and the embedded system is constructed. Ultimately, the data transmission server is tested. Connecting a trolley to the system allows testing of the validity and efficiency of the developed system through the video data transmitted in the driving process. Result of the test shows that the developed system enables multi-device data transfer with monitoring via the mobile network.

• BMB Reports
• /
• 제37권3호
• /
• pp.351-355
• /
• 2004

Separate protocols are commonly used to prepare plasmid DNA, chromosomal DNA, or total RNA from E. coli cells. Various methods for the rapid preparation of plasmid DNA have been developed previously, but the preparation of the chromosomal DNA and total RNA are usually laborious. We report here a simple, fast, reliable, and cost-effective method to extract total nucleic acids from E. coli by direct lysis of the cells with phenol. Five distinct and sharp bands, which correspond to chromosomal DNA, plasmid DNA, 23S rRNA, 16S rRNA, and a mixture of small RNA, were observed when analyzing the prepared total nucleic acids on a regular 1-2% agarose gel. The simple and high-quality preparation of the total nucleic acids in a singe tube allowed us to rapidly screen the recombinant plasmid, as well as to simultaneously monitor the change of the plasmid copy number and rRNA levels during the growth of E. coli in the liquid medium.