• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.53-56
• /
• 2002

We have developed a Monte Carlo (MC) simulator for electron beam lithography in multi-layer resists and multi-layer substrates in order to fabricate and develop high-speed PHEMT devices for millimeter- wave applications. For the deposited energy calculation to multi-layer resists by electron beam in MC simulation, we modeled newly for multi-layer resists and heterogeneous multi-layer substrates. Using this model, we simulated T-gate or r-gate fabrication process in PHEMT device and showed our results with SEM observations.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.51-55
• /
• 1999

A Ni/Ag/Stainless steel 310S(SS310S) multi-layer sheet has been fabricated by a combination of vacuum brazing, cold rolling and texture annealing processes. After heat-treating the thin Ni/Ag/SS310S multi-layer sheet at $900^{\circ}C$ for 2h, development of (100)<001>cube texture on Ni surface was revealed by (111) pole figure. Quantitative chemical analysis was made by EPMA for the cross-section of the Ni/Ag/SS310S multi-layer sheet. EPMA results showed that Ag diffusion into the Ni layer, which may suppress the cube texture development, was negligible. A small amount of Cr atoms were detected in the Ni layer. It showed that Ag can be used as a chemical barrier of alloying element atoms in Ni layer for the Ni/Ag/SS310S multi-layer sheet and a strong cube texture was developed for the Ni layer in the Ni/Ag/SS310S multi-layer sheet.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.28-32
• /
• 2006

A multi-layer of the dye, natural colorant Berberine, was successfully developed by the self-assembly deposition from water-soluble cationic dye(Berberine chloride) and anionic polyelectrolyte PSS(Polysodium 4-styrenesulfonate) in aqueous solution via electrostatic attraction. The corresponding results on multi-layer were characterized by UV-Vis absorbance measurements. The growth of multi-layer formed by the sequential interaction was also determined. The findings measured by UV-Vis spectrophotometer showed that the bilayer deposition characteristic was linear and highly reproducible from layer to layer.

• Composites Research
• /
• 제36권4호
• /
• pp.253-258
• /
• 2023

교통수단의 발전은 이동이 불편한 장애인들의 이동권 보장을 실현하였지만 차량사고시 발생할 수 있는 장애인 탑승객의 안전 향상은 일반 승객좌석에 비해 낮다고 할 수 있다. 특히 갑자기 발생할 수 있는 후방 추돌 사고의 경우 장애인 탑승객의 머리와 목 부상에 취약한 것이 현실이다. 이에 본 연구에서는 휠체어 운송 차량의 후방 추돌 시 차량내 장애인 탑승객의 머리와 목 상해지수 개선을 위해 headrest를 관상면으로 3등분한 multi-layer headrest foam이 제안되었다. 간이 모델을 통한 저속 후방 추돌 해석을 통해 foam의 다양한 압축 특성을 부여하기 위한 stress scale factor의 범위가 선정되었으며, 해당 범위를 parameter로 지정하여 GA최적화가 수행되었다. 최적화결과를 통해 layer의 압축 특성에 따른 HIC와 NIC간의 상간관계 분석이 이뤄졌으며, HIC는 Front layer, NIC는 Mid layer의 압축 특성에 가장 민감하게 반응하였고 Rear layer의 압축 특성은 가장 낮게 나타났다. Validation model에 일반headrest와 최적화된 multi-layer headrest를 각각 배치하여 저속 후방 추돌 sled test 해석을 수행하였으며, 일반headrest대비 multi-layer headrest에서의 HIC와 NIC가 낮게 도출되었다. multi-layer headrest에서의 압축 거동 역시 명확하게 나타나 multi-layer headrest가 일반headrest대비 머리와 목의 상해지수 개선에 효과적인 것이 검증되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.96-111
• /
• 2012

Hull Mounted Sonar (HMS) is a long range submerged vehicle's hull-mounted passive sonar system which detects low-frequency noise caused by machineries of enemy ships or submerged vehicles. The HMS needs a sound absorption /insulation multi-layer structure to shut out the self-noise from own machineries and to amplify signals from outside. Therefore, acoustic analysis of the multi-layer system should be performed when the HMS is designed. This paper simplified the HMS multi-layer system to be an infinite planar multi-layer model. Also, main excitations that influence the HMS were classified into mechanical, plane wave and turbulent flow excitation, and the investigations for each excitation were performed for various models. Stiffened multi-layer analysis for mechanical excitation and general multi-layer analysis for turbulent flow excitation were developed. The infinite planar multi-layer analysis was expected to be more useful for preliminary design stage of HMS system than the infinite cylindrical model because of short analysis time and easiness of parameter study.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2008

Multi layer bellows are being manufactured for commercial vehicle because of the characteristic of high durability compared with single iaγor bellows used to passenger vehicle. Finite Element Method (FEM) study and optimization about single layer bellows are actively progressed, but FEM study about multi layer bellows which have gap between layer is rarely processed. Therefore, this article presents finite element modeling of multi layer bellows for the improvement of simulation reliability. For the shape optimization of multi layer bellows, design of experiment and Taguchi method are used.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3086-3096
• /
• 1999

To declare conformance of multi-protocol Implementation Under Test(IUT), every layer of the multi-protocol IUT should be tested. According to ISO9646, single-layer test method is applied to testing the highest layer of multi-protocol IUT and single-layer embedded test method is used for the layers by layer all the protocols in a multi-protocol IUT. This paper proposes a new method for testing a multi-protocol IUT. The proposed test method assumes that a multi-protocol IUT is under test and that the interfaces between the layers cannot be controlled or observed by the tester. We apply the proposed test method to TCP/IP and compare the application results with those of the existing test turns out that the proposed test method significantly reduces the number of test cases as well as the number of test events while providing the same test coverage. In addition, the proposed test method shows the capability to locate the layer that is source of failure in testing multi-protocol IUTs.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.331-338
• /
• 2021

Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three ㎛-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 ℃ molten metallic glass.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.1033-1043
• /
• 2007

The multi layer perceptron for segmenting objects in images only uses the input windows that are made from a image in a fixed size. These windows are recognized so each independent learning data that they make the performance of the multi layer perceptron poor. The poor performance is caused by not considering the position information and effect of input windows in input images. So we propose a new approach to add the position information and effect of input windows to the multi layer perceptron#s input layer. Our new approach improves the performance as well as the learning time in the multi layer perceptron. In our experiment, we can find our new algorithm good.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.167-173
• /
• 2014

A novel multi-oxide layer structure for vertical cavity surface emitting laser (VCSEL) structures is proposed to achieve higher single mode output power. The structure has four oxide layers with different aperture sizes and thicknesses. The oxide layer thicknesses are optimized simultaneously to reach the highest single mode output power. A heuristic method is proposed for plotting the influence of these variable changes on the operation of optical output power. A comprehensive optical-electrical thermal-gain self-consistent VCSEL model is used to simulate the continuous-wave operation of the multi-layer oxide VCSELs. A comparison between optimized VCSELs with different structures is presented. The results show that by using multi-oxide layers with different thicknesses, higher single-mode optical output power could be achieved in comparison with multi-oxide layer structures with the same thicknesses.