• Journal of Korea Multimedia Society
• /
• v.16 no.10
• /
• pp.1196-1203
• /
• 2013

In general, the cost of transceiver for wireless network configuration is more expensive than that for wired network. However, in case of environmental management system in a tunnel, the cost can be minimized by adopting low rate tranceiver because the amount of the exchanged data for tunnel monitoring is very small. When the obtained data from sensor node is sent directly to the corresponding command node, there is no need to consider routing problem of the data transfer. However in this case, sensor nodes are required to be implemented with high power transmitter and experience high energy consumption. To tackle this problem, relay nodes can be used to transfer the data of tunnel monitoring, and suitable routing protocols for selecting optimum path are needed. Therefore, in this paper, we propose a routing algorithm and a self-configuration protocol for environment management system in tunnel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.233-240
• /
• 2011

A field server was developed by using ubiquitous sensor network technology to monitor the abrupt weather variation in local or mountain area. The data transmissions between deployed field servers in local terrain are very important technology in disaster prevention monitoring system. Weather related information such as temperature, humidity, illumination, atmospheric pressure, dew point and meteorological data are collected from the designated field at a regular interval. The received information from the multiple sensors located at the sensor field is used flooding routing protocol transmission techniques and the sensing data is transferred to gateway through multi-hop method. Telosb sensor node are programmed by nesC language in TinyOS platform to monitor the weather parameters of the local terrain.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.597-602
• /
• 2007

In conventional cooperative communication data rate is 1/2 than non cooperative protocols. In this paper, we propose a full data rate DF (Decode and Forward) cooperative transmission scheme. Proposed scheme is based on time division multiplexing (TDM) channel access. When DF protocol has full data rate, it can not obtain diversity gain under the pairwise error probability (PEP) view point. If it increases time slot to obtain diversity gain, then data rate is reduced. The proposed algorithm uses orthogonal frequency and constellation rotation to obtain both full data rate and diversity order 2. Moreover, performance is analyzed according to distance and optimized components that affect the system performance by using computer simulation. The simulation results revealed that the cooperation can save the network power up to 7dB over direct transmission and 5dB over multi-hop transmission at BER of $10^{-2}$. Besides, it can improve date rate of system compared with the conventional DF protocol.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.89-98
• /
• 2012

In this paper, we proposed the efficient addressing scheme for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. In a 16-bit address space and the network size of a few thousands, it is very unlikely to suffer from frequent address collisions. In response, we propose an elegant (x, y, z) coordinate axes addressing scheme from divided address space of 16 bit and its routing algorithm. One of disadvantages of (x, y) coordinate axes addressing, however, is that any router may not hold as many children as proposed, since sensor nodes tend to be connected to a geographically nearby router. We also present an adaptive routing algorithm for location-aware routing algorithms, using our addressing scheme. As a result, each node was reduced not only bitwise but also multi hop using the coordinate axes while routing and the effective address assignment and routing is to minimize the average energy consumption of each node in the network.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.769-785
• /
• 2015

Although timber structures have been extensively used in underground temporary supporting system, their actual performance is poorly understood, resulting in potentially conservative and over-engineered design. In this paper, a novel wireless sensor technology, SmartPlank, is introduced to monitor the field performance of timber structures during underground construction. It consists of a wooden beam equipped with a streamlined wireless sensor node, two thin foil strain gauges and two temperature sensors, which enables to measure the strain and temperature at two sides of the beam, and to transmit this information in real-time over an IPv6 (6LowPan) multi-hop wireless mesh network and Internet. Four SmartPlanks were deployed at the London Underground's Tottenham Court Road (TCR) station redevelopment site during the Stair 14 excavation, together with seven relay nodes and a gateway. The monitoring started from August 2013, and will last for one and a half years until the Central Line possession in 2015. This paper reports both the short-term and long-term performances of the monitored timber structures. The grouting effect on the short-term performance of timber structures is highlighted; the grout injection process creates a large downward pressure on the top surface of the SmartPlank. The short and long term earth pressures applied to the monitored structures are estimated from the measured strains, and the estimated values are compared to the design loads.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.49-59
• /
• 2014

Recently, wireless sensor networks(WSNs) are widely used for intrusion detection and ecology, environment, atmosphere, industry, traffic, fire monitoring. In this paper, an energy efficient clustering algorithm is proposed. The proposed algorithm forms clusters uniformly by selecting cluster head that optimally located based on receiving power. Besides, proposed algorithm can induce uniform energy consumption regardless of location of nodes by multi-hop transmission and MST formation with limited maximum depth. Through the above, proposed algorithm elongates network life time, reduces energy consumption of nodes and induces fair energy consumption compared to conventional LEACH and HEED. The results of simulation show that the proposed clustering algorithm elongates network life time through fair energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1083-1096
• /
• 2008

This paper proposes an energy-aware path management scheme, so-called the TBP(Threshold based Back-Pressure) algorithm, which is designed for lifetime extension of the energy-constrained wireless sensor networks. With the goal of fair energy consumptions, we extensively utilize the available paths between the source and the sink nodes. The traffic distribution feature of the TBP algorithm operates in two scales; the local and the whole routing area. The threshold and the back-pressure signal are introduced for implementing those operations. It is noticeable that the TBP algorithm maintains the scalability by defining both the threshold and the back-pressure signal to have their meanings locally confined to one hop only. Throughout several experiments, we observe that the TBP algorithm enhances the network-wide energy distribution. which implies the extension of the network lifetime. Additionally, both the delay and the throughput outcomes show remarkable improvements. This shows that the energy-aware path control scheme holds the effects of the congestion control.

• Journal of Internet of Things and Convergence
• /
• v.1 no.1
• /
• pp.1-4
• /
• 2015

This paper aims to present the mathematical model to find the mean web object transfer latency in the slow-start phase of TCP congestion control mechanism, which is one of the main control techniques of Internet. Mean latency is an important service quality measure of end-user in the network. The application area of the proposed latency model is the narrowband environment including multi-hop wireless network and Internet of Things(IoT), where packet loss occurs in the slow-start phase only due to small window. The model finds the latency considering initial window size and the packet loss rate. Our model shows that for a given packet loss rate, round trip time and initial window size mainly affect the mean web object transfer latency. The proposed model can be applied to estimate the mean response time that end user requires in the IoT service applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2008

Mesh WLANs, which consist of wireless mesh routers connecting each other in a mesh topology and self-operate after their autoconfiguration, have several advantages in convenience, swiftness and flexibility of deployment and operation over existing WLANs the expansions of which are done by connecting the APs with wires. However, many technical issues still remain to be solved. Among them, network performance degradations due to the interference between the adjacent hops in multi-hop mesh WLANs, and the reusability of the existing wireless network protocols are critical problems to be answered. This work evaluates the VoIP support performance of IEEE 802.11a/g-based mesh WLANs with multiple wireless interfaces with simulations. The results show that there exit an unfairness in VoIP packet delay performances among mobile routers located at different hops, and that although the capacity of the admitted calls can be increased by increasing the size of voice packet payload it is far less than the expected one. This suggests that the existing 802.11 MAC protocols have their limitation when applied in mesh networks and their enhancement or even a newer one nay be required.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1665-1671
• /
• 2007

Mobile Ad hoc Networks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad-hoc networks. In this study, we proposed an enhanced routing protocol based on AODV by monitoring variation of receiving signal strength. New metric function that consists of node mobility and hops of path is used for routing decision. From extensive experiments by using NS-2, The performance of the proposed routing scheme has been imp개ved by comparison to AODV protocol.