• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.183-194
• /
• 2017

지반을 굴착하여 시추공을 형성할 때 공벽을 중심으로 응력의 재분배가 이루어지고 이 때 시추 안정액을 활용하여 공벽에 응력의 평형을 이룸으로써 공벽의 안정성을 유지한다. 시추공 내에 주입하는 시추 안정액이 시추공의 안정성을 유지하기 위한 압력의 상한과 하한의 범위를 Mud window라고 정의하고 다양한 이론에 의해 계산된다. 본 연구에서는 수치해석을 활용하여 시추공의 안정성을 분석하여 Mud window를 작성하고 이론값과 비교 분석하여 모델링에 대한 검증을 수행하였다.

• 대한가정학회지
• /
• 제38권11호
• /
• pp.137-149
• /
• 2000

The Purpose of this study was to investigate actual condition about the modem adaptation of interior elements(floor, wall, ceiling, door & window) in traditional thatched roof house. The examined objects were interior space of 36 restaurants and cafes in Seoul and Kyung-Ki Do area. 1. Floor: Jang-pan was mostly alternated with linoleum which huts Jang-pan pattem. Wumul-maru was adapted from the original and Jang-maru was alternated with wood or linolium which has western state Jang-maru pattern. Mud was adapted from the original or alternated with slate stone or rough finish cement. 2. Wall: Rice proper was alternated with rice paper book witch has chinese character, paper for parcels or modem wall paper. Plaster-white paint or white handy coat. Mud-mud color paint or bamboo stick witch located in the mud wall orginal. Log-half cut log. Wooden board-without cross bar or irregular form. 3. Ceiling: Yondung-Chongang was mostly adapted from the original and Banja-Chonjang was alternated with rice paper book which has Chinese character or modem wall paper. 4. Door and Window: Ttisal-mun and Panjang-mun were adapted from the original. Wan and A’character door and window were simplified character itself.

• 지질공학
• /
• 제34권2호
• /
• pp.217-228
• /
• 2024

피압대수층은 이를 통과하는 대심도 시추에서 암편 배출 불능, 지하수의 급격한 공내 유입, 이수 손실 등의 문제를 야기한다. 특히 자분 조건일 경우 과압 공극압이 발생하여 적절한 이수 밀도의 적용이 필수적이다. 이 논문에서는 이수창 분석을 이용하여 피압대수층을 통과하는 시추 중 적정이수밀도(SMD)의 결정방법을 제시하고 이를 사례에 적용하여 적용성을 검토하였다. 심도별 이수창의 하한인 최소이수밀도는 해당 심도의 등가이수밀도 공극압 구배 또는 이에 이송 마진을 더하여 산정되며, 피압대수층의 공극압 구배는 피압지하수위 또는 정두압의 측정으로 구할 수 있다. 시추공이 피압대수층에 도달하면 공극압 구배가 급격히 증가하고, 심도가 증가할 수 록 점차 감소한다. 킥 발생을 방지하기 위한 SMD는 굴진 중인 공저 심도와 그 상부 나공 구간의 최소이수밀도 중 최대값으로 결정할 수 있으며, 피압대수층 진입 이후 SMD는 피압대수층 최상부의 최소이수밀도로서 나공 구간 시추 중 이를 유지하여야 한다. 또한 적절한 케이싱의 설치는 SMD를 낮출 수 있어 고투수성 대수층에 대한 이수 침입 또는 이수 손실의 위험을 감소시킬 수 있다.

• 지구물리와물리탐사
• /
• 제11권3호
• /
• pp.204-213
• /
• 2008

2006년 시추되었으며 굴착 시 연약층 붕괴 및 공경수축 등의 잦은 시추공 불안정을 보인 포항 심부 지열 시추공(BH-4, 최종심도: 2,383m)의 안정성에 대해 분석하였다. 안정성 분석을 위해 현장응력과 암석강도를 고려하여 최적이 수압력을 산정한 결과 최적이수압력의 상한은 연직응력으로, 하한은 붕괴압력 또는 공극수압으로 나타났으며, 암종에 따라 매우 다른 범위를 보였다. 시추공 최상부의 반고결 이암 구간은 이수압력의 조절만으로는 공의 붕괴를 방지할 수 없는 조건으로 나타났으며 그 하부의 일부 암종(염기성 암맥, 결정질 응회암)에서는 붕괴압력이 정수압보다 $50{\sim}60%$ 높게 나타났다. 즉 이러한 구간에서는 정수압에 해당하는 이수밀도(0.98 g/$cm^3$)를 사용 시 과도한 공벽 붕괴가 발생할 수 있기 때문에 이수밀도를 1.5 g/$cm^3$ 이상으로 증가시켜 굴착해야 시추공 안정성을 확보할 수 있다.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.281-293
• /
• 2021

Uncertainties in geomechanical input parameters which mainly related to inappropriate data acquisition and estimation due to lack of sufficient calibration information, have led wellbore instability not yet to be fully understood or addressed. This paper demonstrates a workflow of employing Quantitative Risk Assessment technique, considering these uncertainties in terms of rock properties, pore pressure and in-situ stresses to makes it possible to survey not just the likelihood of accomplishing a desired level of wellbore stability at a specific mud pressure, but also the influence of the uncertainty in each input parameter on the wellbore stability. This probabilistic methodology in conjunction with Monte Carlo numerical modeling techniques was applied to a case study of a well. The response surfaces analysis provides a measure of the effects of uncertainties in each input parameter on the predicted mud pressure from three widely used failure criteria, thereby provides a key measurement for data acquisition in the future wells to reduce the uncertainty. The results pointed out that the mud pressure is tremendously sensitive to UCS and SHmax which emphasize the significance of reliable determinations of these two parameters for safe drilling. On the other hand, the predicted safe mud window from Mogi-Coulomb is the widest while the Hoek-Brown is the narrowest and comparing the anticipated collapse failures from the failure criteria and breakouts observations from caliper data, indicates that Hoek-Brown overestimate the minimum mud weight to avoid breakouts while Mogi-Coulomb criterion give better forecast according to real observations.

• 한국주거학회논문집
• /
• 제15권5호
• /
• pp.85-96
• /
• 2004

The purpose of this study was to (md out the characteristics of the residential house in Ulleung Island in terms of building materials, structure and construction method, structural design by actual field surveys. This study found several facts; First, the house was classified into the log house and mud-wall house according to building material for wall structure. The log house prevailed in the early days of the settlement in the island because of affulent timber materials available around. However, the mud wall house became a popular type in later days because of the depletion of timber materials. Second, the Udeki wall was an unique installation reflecting the severe climate conditions of Ulleung Island. However, many aspects of the Udeki wall was changed according to the change of living style and the introduction of modem heating systems in terms of its function, size, building material, layout position etc. Third, the roofing material also has been changed from materials available locally to slate materials transported from the mainland. Fourth, the bamboo slender-ribbed door as a single-swing door type was popular and later time the single-sliding door or three ribbed door was widely used in rooms installed later instead. Fifth, the roof was placed over the room, kitchen, and Chukdam (outer wall) and this was a resonable way to cope with heavy snowfalls in the winter season in Ulleung Island.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.49-68
• /
• 2023

The three-dimensional failure criterion is essential for maintaining wellbore stability and sand production problem. The convenient factor for a stable wellbore is mud weight and borehole orientation, i.e., mud window design and selection of borehole trajectory. This study proposes a new three-dimensional failure criterion with linear relation of three in-situ principal stresses. The number of failure criteria executed to understand the phenomenon of rock failure under in-situ stresses is the Mohr-Coulomb criterion, Hoek-Brown criterion, Mogi-Coulomb criterion, and many more. A new failure criterion is the extended Mohr-Coulomb failure criterion with the influence of intermediate principal stress (σ₂). The influence of intermediate principal stress is considered as a weighting of (σ₂) on the mean effective stress. The triaxial compression test data for eleven rock types are taken from the literature for calibration of material constant and validation of failure prediction. The predictions on rock samples using new criteria are the best fit with the triaxial compression test data points. Here, Drucker-Prager and the Mogi-Coulomb criterion are also implemented to predict the failure for eleven different rock types. It has been observed that the Drucker-Prager criterion gave over prediction of rock failure. On the contrary, the Mogi-Coulomb criterion gave an equally good prediction of rock failure as our proposed new 3D failure criterion. Based on the yield surface of a new 3D linear criterion it gave the safest prediction for the failure of the rock. A new linear failure criterion is recommended for the unique solution as a linear relation of the principal stresses rather than the dual solution by the Mogi-Coulomb criterion.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.43-49
• /
• 2023

Knowledge of minimum horizontal stress (S_hmin) is a significant step in determining full stress tensor. It provides crucial information for the production of sand, hydraulic fracturing, determination of safe mud weight window, reservoir production behavior, and wellbore stability. Calculating the S_hmin using indirect methods has been proved to be awkward because a lot of data are required in all of these models. Also, direct techniques such as hydraulic fracturing are costly and time-consuming. To figure these problems out, this work aims to apply the long-short-term memory (LSTM) algorithm to S_hmin time-series prediction. 13956 datasets obtained from an oil well logging operation were applied in the models. 80% of the data were used for training, and 20% of the data were used for testing. In order to achieve the maximum accuracy of the LSTM model, its hyper-parameters were optimized significantly. Through different statistical indices, the LSTM model's performance was compared with with other machine learning methods. Finally, the optimized LSTM model was recommended for S_hmin prediction in the well logging operation.