• 대한한의학회지
• /
• 제33권1호
• /
• pp.42-51
• /
• 2012

Objectives: We measured the density of smoke and harmful gases emitted from burning adhesive indirect moxa. Through the test we aimed to find out if there was an excessive amount of smoke emitted and if it included harmful gases. Methods: 9 types of adhesive indirect moxa were chosen. The buffer layers which do not burn during treatment were removed and 10g of each moxa were made into powder and put into a holder. A smoke density chamber (Smoke Density Chamber FTT. U.K) and Fourier transform infrared spectroscopy (FT-IR I 4001. MIDAC U.S.A.) were used to measure the density of smoke and harmful gases emitted from burning moxa by ISO 5659-2 test. Results: The result of measuring maximum smoke density showed that the regular indirect adhesive moxa (A-F) emitted high density smoke of 172.1-291.4Ds. The smokeless moxas, Seoam moxas, emitted the least amount of 3.4-5.5Ds. Concentrations of 7 typical harmful gases (CO, HCl, HCN, HBr, HF, SO2, NOx) were measured and all of the moxas emitted CO due to incomplete combustion. 4 types of moxa emitted NOx and all smokless moxas emitted NOx. HBr, HCN, HCl, HF, SO2 were not found in any of the moxas. Conclusions: The amount of harmful gases emitted from burning moxa was much lower than short-term exposure standards of chemical and physical factors (Ministry of Labor 2010-44). Further experiments measuring gases from moxa combustion should be done in larger environments similar to normal medical clinics.

• Korean Journal of Acupuncture
• /
• 제30권3호
• /
• pp.178-184
• /
• 2013

Objectives : The warm needling technique is the method combining the effects of acupuncture needle with those of moxibustion. We need to standardize the characteristics of the warm needling technique, in order to get more systematic and objective results in operation and effects and then get more clinical abilities in these fields. Methods : In this study, using labview system on the warm needling technique, we measured and compared partial temperature changes according to the kind of needle. We studied relations of moxa cones of various sizes with the peak combustion temperature. Results and Conclusions: When we measured the warm needling's partial temperature, temperature measured at 1 and 2 cm below the head, according to the kind of needle, gold needle got the higher result on the peak than SS304 stainless steel needle. In the case of combustion of the moxa cones, cones weighing 0.4 g and 0.8 g, respectively, and the apex ignition method with gold needle showed the higher result than the apex ignition method with stainless steel needle, when we measured the effective stimulus time at 2 cm below the head and the mean temperature during the effective stimulus time. Although more research to standardize the characteristics of the warm needling technique will be needed, we suggest, according to these results, that warm needling of gold needle combined with moxa cone of 0.4 or 0.8 g is effective.

• 대한한의학회지
• /
• 제29권3호
• /
• pp.11-20
• /
• 2008

Objectives: Warm-needling is a method combining the effects of acupuncture with the effects of moxibustion. We need to standardize the characteristics of warm-needling in order to achieve consistency in its operational mechanisms and effects, which will improve clinical ability in the field of Eastern medicine. Methods: In this study, using the LabVIEW system on the warm-needling technique, we measured and compared partial temperature changes which varied according to the density of the moxa cone and the moxa cone's core peak temperature. Results& Conclusions: Examination of the warm-needle's partial temperature in relation to the cone density of the 0.8g moxa specimen suggests that a lower density of the moxa cone corresponds to a higher peak temperature and but with a shorter duration. During the effective stimulus time, the lower the density of the moxa cone, the shorter the duration of the effective stimulus time and the higher the mean temperature. Conversely, the higher the density of the moxa cone, the longer the effective stimulus time and lower the mean temperature.

• Korean Journal of Acupuncture
• /
• 제34권3호
• /
• pp.109-115
• /
• 2017

Objectives : Many researches have studied warm needling technique to standardize its treatment by temperature measurement and material differences in the effectiveness. The purpose of this study is to compare the temperature changes of the acupuncture needle shaft during the combustion process of the moxa stick to determine the heat transfer pattern of the warn needling. Methods : A moxa stick($7{\times}8mm$) was connected to one side of the needle shaft using a stainless steel needle(ø 0.3 mm, ø 0.5 mm, ø 0.8 mm, shaft length 40 mm) with the needle handle removed. During the warm needling, temperature changes of the needle shaft were observed with an infrared camera(Flir E30) and an infrared thermometer(TESTO 845). Results : In the normal condition, heat transmit of needle shaft increased at spots 10 mm and 25 mm below the moxa stick. The amount of heat transmit increased with the diameter of needle shaft. However, when the heat shield was installed to exclude radiant heat from the moxa stick, heat transfer was less at 10 mm below the moxa stick and no temperature change was observed at 25 mm below the moxa stick. Heat transfer by warm needling does not reach the end of needle shaft even in ø 0.8 mm needle. Conclusions : It is suggested that the radiant heat of moxa stick results in the heat transmit of acupuncture needle shaft. Thus, radiant heat transmit must be considered as one of the heat transfer characteristics of the warm needling.

• Journal of Acupuncture Research
• /
• 제21권1호
• /
• pp.119-135
• /
• 2004

Objective: The purpose of this study is to investigate the mechanism and effect of moxibustion with salt objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with salt. Methods: We have selected of the moxibustion with salt of indirect moxibustion. We make a comparative study of the thermodynamic characteristics of moxibustion with salt as a kind of the 4 salt. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results: 1. We make out that it is not significantly change the time of thermal conduction of moxibustion with salt as a kind of 4 salt. 2. The heating period of Refined Salt was long and that of Sun-dried Salt was a short time respectively. The heating period of maximum tamperature is high Sun-dried Salt, Mechanical Salt and Refined Salt orderly. Maximun heating speed in the heating period was $0.151{\sim}0.184^{\circ}C/sec$ and at the same tendency of the maximum temperature in the heating period. 3. The retaining period was shorter than the heating period respectively, that is 15~24% of the combustion time of in the heating period. We make out that it is not significantly different the time of the retaining period as a kind of 4 salt. The mean temperature of retaining period was $43.2{\sim}48.1^{\circ}C$, that was extraordinarily high temperature. 4. We make out that it is not significantly different the time of the cooling period as a kind of 4 salt. The cooling period was measured 223~233sec. Beacuse the same density and size of moxa combustion was made an experiment. 5. The effective combustion time of Refined Salt is longer(259sec) than that of Sun-dried Salt(173sec). It is significantly different the time of the combustion time as a kind of 4 salt. 6. It is significantly different the Sample deviation of the combustion time as a kind of 4 salt because of the water content of the 4 salt individually. Conclusions: As the base on this study, we obtained the conclusion as the follows. The salt of moxibustion with salt was fitted for Sun-dried Salt due to making to Mechanical Salt recently. The Refined Salt is composition rate to another and small size comparatively. So It was fitted for the salt of moxibustion with salt. It is necessary to study continuously about the more suitable moxibustion with salt and quantitative analysis about the moxibustion with salt.

• Journal of Acupuncture Research
• /
• 제24권2호
• /
• pp.155-167
• /
• 2007

Objectives : This study was performed to evaluate the general distribution and the efficacy of oriental medical treatment for low back pain. Methods: We have selected of the moxa bucket moxibustion. We make a comparative study of the thermodynamic characteristics of moxa bucket moxibustion. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa bucket moxibustion made by oak wood. Results : The 80 cases of low back pain patients was analyzed according to the distribution of sex, age, the period of disease, contributing factor, the patient-condition on admission, the symptom on admission, the duration of admission, the reading of the X-ray and the treatment efficacy was evaluated respectively. 1. Female was more than male in the ratio of 1:1.2, and thirties and seventies 25% the most, the acutest phase 46.3% the most, reason unknown 33.8% the most, Grade III 50% the most, L.B.P. only 51.3% the most, the day of 6-10 30% the most, compression Fx 30% the most. 2. In the total treatment result, the good was 51.3%, the excellent 22.5%, the fair 17.5%, the poor 8.8% in order. About 'the effective rate'(the percentage of positive effective treatment cases) of each distribution, the fifties 100% the most, the acutest phase 97.3% the most, the slip down, weight lifting, overuse 100% the most respectively, Grade III 97.5% the most, L.B.P. only 95.1% the most, the day of 11-15 100% the most, HN.P. 93.3% the most. Conclusions : We have known the efficacy of oriental medical treatment for L.B.P. was good and early treatment was better than late treatment and main cause of L.B.P. was degenerative change.

• 동의생리병리학회지
• /
• 제23권6호
• /
• pp.1332-1340
• /
• 2009

Moxa-combustion therapy makes use of heat stimulus and chemicals result form when cauterize the skin with moxa cones to medical cares. Despite an extensive evidence-base guiding the selection of stimulation parameters and attributes of subject, little methodologically research regarding the attributes of moxa cautery in need to provide effective stimulation. To determine moxibustion's effects of the three different moxa cautery made by three different company(as A, B, C), the small intestinal motility in rats were observed after moxibustion at ST36. Under anesthesia, each intensities(1, 5, 10 times), two regions(left and right at ST36) and a quantity(as number of 1, 5, 10 times at once) were applied to the groups divided with sex. In each intensities groups, the A product made increase with 5, 10 times in male and female group. The B and C product made increase with 10 times in male group and the B product made increase with 1, 5, 10 times and the C product made increase with 5 times in female group. In two regions(left and right at ST36) groups, the A and C product made increase with 1(right), 5(right) times and the B product made increase with 1(left), 10(left), 10(right) times in male group. In female group, the A product made increase with 5(left), 5(right), 10(right) times and the B product made increase with 1(left), 10(left), 10(right) times and the C product made increase with 5(left), 10(left) times. In a quantity(as number of 1, 5, 10 times at once) groups, the A and B product did not show any changes but the C product made increase with a quantity of 10 times in male group. In female group, The B product made increase with a quantity of 1 times and the C product made increase with a quantity of 5 times, but the A product did not show any changes. Three different moxa cautery made by three different company made differents result in each group divided with sex. With these results, it was suggested that we should consider the a process of manufacture and moxa cautery's quality for the adequate value of moxibustion.

• Journal of Acupuncture Research
• /
• 제37권2호
• /
• pp.69-78
• /
• 2020

Although there have been studies investigating the clinical effects of warm needling (WN) for specific diseases, a comprehensive review of WN is needed. Four Korean internet databases were used in the review of WN treatment performed in Korea. The search terms used to retrieve articles were "warm needling (in Korean; 온침)," "warm acupuncture," and "warm needle." A total of 29 articles were reviewed. The following aspects of WN were investigated: language and terminology, study design, use of Standards for Reporting Interventions in Clinical Trials of Acupuncture, research ethics, moxibustion types, number of moxa used, moxa combustion time, needle retention time, treatment time and frequency, acupoints, meridians, acupuncture size and depth, disease classification, pattern identification, outcome measures, and adverse effect. More sophisticated and precise studies on WN are required.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.223-226
• /
• 2001

In this paper, we devised electrical thermal stimulator for meridian point. The system consist of has four channel applicator, power controller and computer. The applicator consist of resistance wire heater and thermal sensor. A stimulation patterns are obtained from a real moxa combustion. The developed system does not make any smog, does not need moxa anymore, only need electricity.

• Korean Journal of Acupuncture
• /
• 제27권4호
• /
• pp.35-47
• /
• 2010

Objectives : To characterize the thermal properties of traditional warm needle and new warm needle with various air flows as an important environmental factor and to suggest the necessity of maintaining suitable environment of clinics to maximize their efficacy. Methods : We measured the temperature characteristics of traditional moxa warm needle and new moxa charcoal warm needle by applying an automatic temperature acquisition system with thermocouples while external various air flows were supplied. Temperatures of two positions at the needle body were measured while a moxa cone burned. Typical temperature characteristics like peak temperature, duration, curve shape and the efficiency of the heat stimuli by heat amount analysis were executed. Results : Both warm needles showed similar temperature curve with an increase in the air flow. Peak temperature and duration of effective heat decreased with the air flow, as shown in indirect moxibustion on garlic. The temperature change pattern by the air flow became more apparent when the total combustion heat was compared with the effective heat. The values from two positions on the needle body were significantly different, showing a distance dependency from the heat source of warm needle acupuncture. Conclusions : Thermal properties of warm needle acupuncture was observed variously with surrounding air flow of 0.0 - 0.7 m/s. It emphasized the importance of environmental control as well as the warm needle itself such as heat source and needle. The latter has already been known to deliver designated heat to subjects. It also indicated the importance of education and skill of the practitioners of warm needle acupuncture.