• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.54-61
• /
• 2011

We propose a surveillance-alert system based on optimal placements of PDR(Pulsed Doppler Radar) sensors in USN. By using the detection information of moving target from PDR sensor and by considering the covered detection region and geographical property of the strategic area, three optimal placements of sensors are proposed. The proposed placement are named as the grid type, the linear type and the zigzag type. Also, the surveillance alert system based on three sensor placements are developed. The alert level of the proposed surveillance-alert system are 'Perception', 'Caution', 'Warning' and 'Danger' which are decided by the distance change between the moving targets and the command post. The performace of the developed system is verified via outdoor experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.588-595
• /
• 2013

Airborne SAR system is the imaging Radar system that is loaded on a manned or unmanned aircraft, which is in charge of high quality image acquisition and moving target detection. This paper describes the operational requirements for the Airborne SAR system and suggests the operational concept to satisfy the requirements. To be specific, it describes the interface with airborne system, state definition and transition, operation mode based on mission definition file, fault management, and data storing and transmission concept. Finally, it gives the ground test results to verify the SAR system operational concept.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.51-57
• /
• 2007

Without human dynamics effects, the manually operated target tracking system has poor performance or instability in real environments. The tracking system is invalid when a human is added to the control loop as a real time delay, because input signals are generated by human operator to reduce the errors between target and gun. In this paper, we consider the human operator as a part of controller and modeling the human operator as a first-order model to generate the intentional force. But it is known that human modeling is not easy because of disturbance or noise of the vehicle while moving for the target. We performed a variety of experiments with real plant to identify the model's parameters and verify the proposed operator model's efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2196-2218
• /
• 2017

Multicast communication has been widely used in the Internet. However, multicast communication is vulnerable to DoS attack due to static router configuration. In this paper, HMC, a hopping multicast communication method based on SDN, is proposed to tackle this problem. HMC changes the multicast tree periodically and makes it difficult for the attackers to launch an accurate attack. It also decreases the probability of multicast communication being attacked by DoS and in the meanwhile, the QoS constrains are not violated. In this research, the routing problem of HMC is proven to be NP-complete and a heuristic algorithm is proposed to solve it. Experiments show that HMC has the ability to resist DoS attack on multicast route effectively. Theoretically, the multicast compromised probability can drop more than 0.6 when HMC is adopt. In addition, experiments demonstrate that HMC achieves shorter average multicast delay and better robustness compared with traditional method, and more importantly, it better defends DoS attack.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.873-878
• /
• 2013

An EOTS (Electro-Optical Tracking System) provides stabilized images while tracking a moving target. This paper presents a novel concept of driving the outer gimbal first for improving the maneuverability of an EOTS, contrary to the conventional inner gimbal mode. It has the advantages of faster positioning performance and stable operation in Nadir-point. Analysis of frequency responses reveal that the present scheme results in a wider control bandwidth and larger gain margin, compared to those of the previous one. The actual experimental results confirm that the maneuvering is stable although the input command has a large angular acceleration.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.431-433
• /
• 2020

4 차 산업혁명의 시대를 맞아 사물인터넷 및 5G 를 활용한 수많은 사물들이 인터넷을 기반으로 연결되고 있다. 또한 이러한 사물들을 관제 및 유지 보수하기 위해서 장비들에 보안 관제 시스템을 구축하고 모니터링을 하기 위한 많은 비용과 관리의 어려움을 겪고 있다. 만약, 장비들이 스스로 능동적인 방어를 하게 된다면 유지관리의 가장 큰 문제가 해결될 것이다. 이러한 능동적인 보안을 통해 보호대상 시스템의 다양한 특징들을 시간의 변화에 따라 역동적으로 변경하는 MTD(Moving Target Defense)기법들이 개발되고 있다. 본 논문에서는 네트워크 기반의 NMTD(Network-based MTD)를 이용하여 호스트 서버에 IP 와 PORT 로 접속하는 SSH 에 적용하여 능동적으로 보호하고, OTP 를 활용하여 사용자 식별을 통해 SSH 에 대한 내부자 접속에 대한 보안을 강화하는 시스템을 설계 및 구현하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.930-937
• /
• 2014

Inverse synthetic aperture radar (ISAR) images can be generated by radar which radiates the electromagnetic wave to a target and receives signal reflected from the target. ISAR images can be widely used to target detection and recognition. This paper proposed a method of generation of high resolution ISAR images by synthesizing frequency spectrums of each stepped chirp waveform in one burst and sub-sampling in frequency domain. This process is performed over entire bursts during coherent processing interval. Conventional ISAR image generation method using stepped frequency waveform has a severe problem of short unambiguous range, loading to ghost phenomenon. However, this problem can be resolved by the proposed method. In simulations, we generate high resolution ISAR image of the moving target which is Boeing-737 aircraft model composed of several ideal point scatterers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.532-539
• /
• 2018

A position estimation technique is presented for a missile using high-resolution range profiles obtained by three wideband radars. Radar measures a target range using a reflected signal from the surface of a missile. However, it is difficult to obtain the range between the radar and the origin of the missile. For this reason, the interior angle between the moving missile and tracking radar is calculated, and a compensated range between surface of the missile and its origin is added to the tracking range of the radar. Therefore, position estimation of a missile can be achieved by using three total ranges from each radar to the origin of the missile. To verify the position estimation of the missile, electromagnetic numerical analysis software was used to prove the compensated range according to the flight position. Moreover, a wideband radar operating at 500-MHz bandwidth was applied, and its range profile was used for the position estimation of a missile.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.53-61
• /
• 2012

This paper proposes a real-time distance measurement system of high temperature and high speed target using infrared stereo camera. We construct an infrared stereo camera system that measure the difference between target and background temperatures for automatic target measurement. First, the proposed method detects target region based on target motion and intensity variation of local region using difference between target and background temperatures. Second, stereo matching by left and right target information is used to estimate disparity about real-time distance of target. In the proposed method using infrared stereo camera system, we compare distances in three dimension trajectory measuring instrument and in infrared stereo camera measurement. In this experiment from three video data, the result shows an average 9.68% distance error rate. The proposed method is suitable for distance and position measurement of varied targets using infrared stereo system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.89-94
• /
• 2019

K1A1 tank commander's primary thermal sight is a device that enables tank commanders to detect, identify, aim and track the target by observing targets in all directions during day, night and in situations of smokescreen and fog through $360^{\circ}$ rotation independent from the gunner's primary thermal sight and stabilizing the line of sight even under the vibrations occurring when the tank is standstill and moving. The main function of this device is to detect and process visible and thermal images and deliver the final images to the tank commander. One of the core parts to that end is the observation window (daytime/thermal image window). This core part is mounted at the entrance of the optical path for observing the target and plays the role of making visible light during the daytime and infrared light during the night pass through the target and transmitting the resultant images to the internal optical system of the tank commander's primary thermal sight. Such core parts have been selected as depot maintenance items so that they are replaced by new parts instead of being recycled when they are subjected to maintenance in most cases. That is, the military budget is wasted because such parts are replaced by new parts despite that they can be recycled for maintenance. Therefore, this study proposed a mounting tool for polishing and coating observation windows (daytime and thermal image window) using planar polishing equipment and DLC (Diamond-Like Carbon) coating equipment. In addition, this study presented an amendment (proposal) of the Depot Maintenance Work Request (DMWR) already published to verify the performance of recycled products including the establishment of inspection standards for recycling processes.