• 한국축산시설환경학회지
• /
• 제13권2호
• /
• pp.121-128
• /
• 2007

축산분뇨와 톱밥을 혼합하여 수분조절을 한 후 발효조에 투입하는 방식이 아닌 발효상에 미리 투입된 톱밥위에 축산분뇨를 살포하면서 교반처리하여 발효증발 처리하는 시스템을 이용하여 퇴비 발효층의 온도, 수분함량, 수분수지, 퇴비의 비료성분을 연구하였다. 1. 본 처리공정은 과다한 수분을 신속하게 침출수 강제배출 방식으로 배출하여 슬러리 투입분뇨의 함수율이 높더라도 수분증발이 이루어지고 발효상 함수율은 $65{\sim}73%$ 전후로 유지되었다. 2. 연속퇴비화 과정에서 시험기간 중에 10.6% 정도의 침출수가 발생되었다. 또한 5개월 가동 기간 동안 톱밥 $1m^3$ 투입 당 $3.16m^3$의 돈분슬러리 처리가 가능하였다. 3. 침출여과액은 오염물질농도가 낮아져 투입분뇨 대비 BOD는 86.5%, SS은 96.2% 저감되었다. 4. 퇴비사의 미기상 분석결과 상대습도는 낮 시간을 제외한 야간시간에는 $80{\sim}100%$로서 높았다. 퇴비사의 습도가 높아지면 퇴비화 과정 중 수분증발 효율이 저하의 원인이 될 것으로 사료된다.

• 마이크로전자및패키징학회지
• /
• 제15권3호
• /
• pp.41-46
• /
• 2008

본 연구는 2.5MHF-xMHCl$(x:0\sim8)$ 혼합 용액에서 $EAGLE^{2000TM}$ LCD 유리의 식각에 관한 것이다. 유리의 용해공정에서 율속단계는 HF를 함유한 식각액과 유리와의 반응이었다. 그 증거로는 유리의 두께는 시간에 따라 직선적으로 감소하였고, 식각속도는 교반정도에 무관하게 일정하였으며, 활성화 에너지가 $35\sim45$ kJ/mol 범위였다는 점이다. 순수한 HF만 사용했을 때 보다 HCl이 첨가되면 식각속도는 증가하였고. 그 속도는 HCl 첨가량에 비례하여 증가하였다. 또한 HCl 첨가시 식각 후의 표면은 식각 전과 유사하였다. 이는 HCl 첨가에 의해 $H_{3}O^{+}$ 이온의 농도가 증가하여 각종 불화물의 용해도를 증가시키고, $H_{3]O^{+]$ 이온의 흡착은 Si-O 결합의 결합력을 감소시키기 때문에 일어난 현상으로 사료된다.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.425-431
• /
• 2005

Line Shaped Solid Oxide Fuel Cell (SOFC) with multilayered structure has been fabricated via direct-writing process. The cell is electrolyte of Ni-YSZ cermet anode, YSZ electrolyte and LSM cathode. They were processed into pastes for the direct writing process. Syringe filled with each electrode and electrolyte paste was loaded into the computer-controlled robe-dispensing machine and the paste was dispensed through cylindrical nozzle of 0.21 mm in diameter under the air pressure of 0.1 tow onto a moving plate with 1.22 mm/s. First of all, the anode paste was dispensed on the PSZ porous substrate, and then the electrolyte paste was dispensed. The anode/electrolyte and the PSZ substrate were co-fired at $1350^{\circ}C$ in air atmosphere for 3 h. The cathode layer was similarly dispensed and sintered at $1200^{\circ}C$ for 1 h. All the electrode/electrolyte lines were visually aligned during the direct writing process. The effective reaction area of fabricated SOFC was $0.03 cm^2$, and the thickness of anode, electrolyte and cathode was 20 $\mu$m, 15 $\mu$m, and 10 $\mu$m, respectively. The single line-shaped SOFC fabricated by direct-writing process exhibited OCV of 0.95 V and maximum power density of $0.35W/cm^2$ at $810^{\circ}C$.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.369-375
• /
• 2019

This paper presents a new method on how to calculate the thrust forces acting on an auto-leveling device in headlamps for passenger vehicles. The leveling device is used to lower the angle of lights when a load in the trunk of the vehicle lifts it. In the process of the headlamp design, it is imperative to predict the external forces so that the designers can decide whether to proceed or not. The device is composed of three pivot joints with no reaction moment, a plate that holds the lamp, and a leveling motor that changes rotation to linear motion. In this study, force balance, moment balance, and geometric compatibility are applied to the leveling device system so that a nonlinear system of equations can be derived; the multi-dimensional Newton-Raphson algorithm is then used to solve these. A sensitivity analysis is carried out to verify which design variables affect the system the most: the mass of the lamp and the height between the pivot and leveling device affect the thrust forces the most. Then, considering the friction forces between the moving parts, the hysteresis of the forces are derived. An experimental apparatus, designed and developed in this study, is used to verify the exactness of the derived equations. The results from experiments coincide well with the calculated results. The friction hysteresis, in particular, proves this upon analysis.

• 한국의료질향상학회지
• /
• 제6권1_2호
• /
• pp.48-79
• /
• 1999

Background : The clothing is considered as second skin. The patient clothing needs basic clothing demands which are comfortable, functional and aesthetical and special demeands which are associated with medical examination, treatment and management of daily-life inconveniences. The patient is weak and labile to psychic trauma and has limitation of movement. So the help of others is needed. But recent patient clothing does not satisfy above demands. So the design, making and management of patient clothing to satisfy those demands are very important. The purpose of this study' is to develop multipurpose clothing which is comfortable, functional, aesthetical and satisfying patients and medical personnels. Method : The questionnaires of existing patient clothing were tested by patients, medical doctors, and nurses. After analyzing two types of questionnaires, eight types of experimental patient clothing were made. After preference test, shortcomings were removed and merits were adapted. One type of multipurpose patient clothing mixing eight above experimental clothing was made. The state of wearing and moving were videotaped. The videotape-recoding was watched by patient, caregivers(medical doctors, nurses) and clothing specialists. Result : The general reaction for experimental clothing were positive by the group of patients, medical personnels and clothing specialist, there were significant differences among three groups. Conclusion : It was thought that to develop one type of multipurpose clothing is possible. If the studys for patient clothing which are free-size and economic matters that are type of clothes and method of washing are made in depth, the desirable patient clothing will appear.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.631-637
• /
• 2005

This paper presents a stiffness analysis method for a low-DOF parallel manipulator, which takes into account of elastic deformations of joints and links. A low-DOF parallel manipulator is defined as a spatial parallel manipulator which has less than six degrees of freedom. Differently from the case of a 6-DOF parallel manipulator, the serial chains in a low-DOF parallel manipulator are subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each limb can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness model of an F-DOF parallel manipulator consists of F springs related to the reciprocal screws of actuations and 6-F springs related to the reciprocal screws of constraints, which connect the moving platform to the fixed base in parallel. The $6{times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints. The six spring constants can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; the link can be considered as an Euler beam and the stiffness matrix of rotational or prismatic joint can be modeled as a $6{times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is zero. By summing the elastic deformations in joints and links, the compliance matrix of a serial chain is obtained. Finally, applying the reciprocal screws to the compliance matrix of a serial chain, the compliance values of springs can be determined. As an example of explaining the procedure, the stiffness of the Tricept parallel manipulator has been analyzed.

• 제어로봇시스템학회논문지
• /
• 제13권4호
• /
• pp.320-328
• /
• 2007

This paper presents a stiffness modeling of a low-DOF parallel robot, which takes into account of elastic deformations of joints and links, A low-DOF parallel robot is defined as a spatial parallel robot which has less than six degrees of freedom. Differently from serial chains in a full 6-DOF parallel robot, some of those in a low-DOF parallel robot may be subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each serial chain can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness of an F-DOF parallel robot can be modeled such that the moving platform is supported by 6 springs related to the reciprocal screws of actuations (F) and constraints (6-F). A general $6{\times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints, The compliance of each spring can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; a link is modeled as an Euler beam and the compliance matrix of rotational or prismatic joint is modeled as a $6{\times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is infinite. By summing joint and link compliance matrices with respect to a reference frame and applying unit reciprocal screw to the resulting compliance matrix of a serial chain, the compliance of a spring is determined by the resulting infinitesimal displacement. In order to illustrate this methodology, the stiffness of a Tricept parallel robot has been analyzed. Finally, a numerical example of the optimal design to maximize stiffness in a specified box-shape workspace is presented.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.41-46
• /
• 2012

A deep-sea manganese nodule miner consists of 4 parts: the pickup device, crusher, disposal device, and tracked vehicle. The tracked vehicle is an essential component to keep the self-propelled miner moving across deep-sea soil. The performances of the tracked vehicle are influenced by noise factors: the shear strength of the seafloor, bottom current, seafloor slope, track speed, reaction forces of flexible hose, etc. It is necessary to adopt a robust design method that improves the performances and minimizes the variation caused by noise factors. Taguchi's method, the most widely known robust design method, searches for the robust optimum using an orthogonal array composed of the product of the inner array and outer array. In this paper, we propose a new screening technique to reduce the number of input factors and apply the MRSN (Multi-Response Signal to Noise) ratio to convert multiple performances into single one in order to overcome the difficulties and limitations of using Taguchi's method in a case with many input factors and multiple performances. A test miner was already designed and tested. It has about 1/10 the capacity of a commercial one and was successfully operated at an in-shore area. Taguchi's robust design was applied to the tracked vehicle of the test miner, and design improvements were implemented for the vehicle.

• Fisheries and Aquatic Sciences
• /
• 제19권5호
• /
• pp.26.1-26.8
• /
• 2016

Background: The nematode species belonging to genus Anisakis occur at their third larval stage in numerous marine teleost fish species worldwide and known to cause accidental human infection through the ingestion of raw or undercooked fish or squids. They may also draw the attention of consumers because of the visual impact of both alive and dead worms. Therefore, the information on their geographical distribution and clear species identification is important for epidemiological survey and further prevention of human infection. Results: For identification of anisakid nematodes species isolated from largehead hairtail (Trichiurus japonicus), polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis of internal transcribed spacers of ribosomal DNA were conducted. Mitochondrial cytochrome c oxidase subunit 2 gene was also sequenced, and phylogenetic analysis was conducted. From the largehead hairtail (n = 9), 1259 nematodes were isolated in total. Most of the nematodes were found encapsulated throughout the viscera (56.2 %, 708/1259) or moving freely in the body cavity (41.5 %, 523/1259), and only 0.3 % (4/1259) was found in the muscles. By PCR-RFLP, three different nematode species were identified. Anisakis pegreffii was the most dominantly found (98.7 %, 1243/1259) from the largehead hairtail, occupying 98.7 % (699/708) of the nematodes in the mesenteries and 98.1 % (513/523) in the body cavity. Hybrid genotype (Anisakis simplex ${\times}$ A. pegreffii) occupied 0.5 %, and Hysterothylacium sp. occupied 0.2 % of the nematodes isolated in this study. Conclusions: The largehead hairtail may not significantly contribute accidental human infection of anisakid nematode third stage larvae because most of the nematodes were found from the viscera or body cavity, which are not consumed raw. But, a high prevalence of anisakid nematode larvae in the largehead hairtail is still in concern because they may raise food safety problems to consumers. Immediate evisceration or freezing of fish after catch will be necessary before consumption.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.17-24
• /
• 2012

This study is for providing fundamental data of sport biomechanics in GRF & plantar pressure of stepping foot of skilled & unskilled players' at the soccer instep shooting moments. Wearing Pedar-x of Novel, the study has drawn the following conclusion after measuring and analyzing the impact on the GRF and plantar pressure of stepping foot at the instep shooting moments. First, maximum vertical GRF showed higher in the skilled group than in the unskilled group. The results showed significantly different. This study reached the conclusion that the players in the skilled group performed faster and stronger stepping foot motions that the ones in the unskilled(p<.01). Second, since the plantar pressure of the skilled group appeared significantly higher than that of the unskilled, it has brought us to the conclusion that the skilled group performed faster and stronger stepping foot motions than the unskilled group (p<.05). Third, at the moment of instep kicking, the skilled group's average maximum plantar foot pressure of stepping foot was higher than the unskilled. Though the difference was not statistically significant, it can be concluded that the skilled group performed faster and stronger stepping foot motions than the unskilled group(p>.05). Fourth, for the COP moving route of stepping foot while instep kicking, the skilled people performed accurate and strong shooting motions directly toward the target direction with stable postures, no matter how it's left, right, front or back.