• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1916-1917
• /
• 2011

A development of a new moving obstacle avoidance algorithm using a delay-time Compensation for a network-based autonomous mobile robot is proposed in this paper. The moving obstacle avoidance algorithm is based on a Kalman filter through moving obstacle estimation and a Bezier curve for path generation. And, the network-based mobile robot, that is a unified system composed of distributed environmental sensors, mobile actuators, and controller, is compensated by a network delay compensation algorithm for degradation performance by network delay. The network delay compensation method by a sensor fusion using the Kalman filter is proposed for the localization of the robot to compensate both the delay of readings of an odometry and the delay of reading of environmental sensors. Through some simulation tests, the performance enhancement of the proposed algorithm in the viewpoint of efficient path generation and accurate goal point is shown here.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.158-164
• /
• 1994

A volumetric error compensation method was stueide with measuring systematic error of a Coordinate Measuring Machine(CMM). The volumetric error equations were proposed for a Moving Bridge type CMM. Using the error equations, error vectors in the measuring volume were corrected by a software method. The CMM was controlled by the compensation program separately in the measuring and moving function of the CMM proving. The linear accuracy of the CMM was measured by the Laser Interferometer and compared with the data before the volumetric error compensation. This method was proved as low cost and effective to reduce the systematic error of the CMM, as no hardware modification is required.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.69-76
• /
• 2005

The laser interferometer system such as HP5529A is one of the most powerful equipment fur measurement of the straightness error in precision stages. The straightness measurement system, HP5529A is composed of a Wollaston prism and a reflector. In this system, the straightness error is defined as relative lateral motion change between the prism and the reflector and computed from optical path difference of two polarized laser beams between these optics. However, rotating motion of the prism or the reflector used as a moving optic causes unwanted straightness error. In this paper, a compensation method is proposed for removing the unwanted straightness error generated by rotating the moving optic and an experiment is carried out for theoretical verification. The result shows that the unwanted straightness error becomes very large when the reflector is used as the moving optic and the distance between the reflector and the prism is far. Therefore, the prism must be generally used as the moving optic instead of the reflector so as to reduce the measurement error. Nevertheless, the measurement error must be compensated because it's not a negligible error if a rotating angle of the prism is large. In case the reflector must be used as the moving optic, which is unavoidable when the squareness error is measured between two axes, this compensation method can be applied and produces a better result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.52-54
• /
• 2015

In this paper we propose a new background motion compensation method which can be applicable to moving object detection with a moving monocular camera. To estimate the background motion, a series of image warpings are carried out for each pair of the corresponding patches, defined by the fixed-size lattice, based on the motion information extracted from the feature points surrounded by the patches and the estimated camera motion. Experiment results proved that the proposed has approximately 50% faster in execution time and 8dB higher in PSNR comparing to a conventional method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1138-1144
• /
• 2009

The velocity and acceleration of the ground moving target can cause the target position to be displaced and defocused in the SAR image. In this paper, the displacement compensation scheme is presented to correct the displaced position and defocused moving target image in the DPCA based SAR-GMTI system. The influence of the ground moving target due to the velocity and acceleration is analyzed in range and azimuth directions, and its compensation method is presented with the simulation results. The performance of the proposed method is compared with respect to the estimated velocity and defocused quantity in both range and azimuth directions.

• Phonetics and Speech Sciences
• /
• v.2 no.4
• /
• pp.145-151
• /
• 2010

In this paper, a robust feature compensation method is proposed for improving the performance of speech recognition. The proposed method is incorporated into the auto-regressive moving average (ARMA) based feature compensation. We employ variable weights for the ARMA filter according to the degree of speech activity, and pass the normalized cepstral sequence through the weighted ARMA filter. Additionally when normalizing the cepstral sequences in training, the cepstral means and variances are estimated from total training utterances. Experimental results show the proposed method significantly improves the speech recognition performance in the noisy and reverberant environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.913-919
• /
• 2006

This paper presents a technique for motion compensation of ISAR(Inverse SAR) images for a moving target. If a simple fourier transform is employed to obtain ISAR image for a moving target, the image is usually blurred. These images blurring problem can be solved with the time-frequency transform. In this paper, motion compensation algorithms of ISAR image such as STFT(Short Time Fourier Transform), GWT(Gabor Wavelet Transform) are described. In order to show the performances of each algorithm, we use scattering wave of the ideal point scatterers and simulated MIG-25 to obtain motion compensated ISAR image, and display the resolution of STFT and GWT ISAR image.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.684-693
• /
• 2011

Measurement time delay in the transfer alignment is very important. It has been well known that the time delay degrades the alignment performance and makes some navigation errors on the transfer alignment of slave INS(SINS). Therefore there are many schemes to eliminate that time delay but the compensation technique through the estimation by Kalman filter through modeling the time delay as a random constant is generally used. In the case of change over measurement time delay or the large measurement time delay, estimation performance in the existing compensation technique is degraded because model of time delay is not correct any more. In this paper, we propose the method to keep the time delay almost constant even though in the abnormal communication state and very small through feedback compensation using double buffer. Double buffer consists of two moving window to temporarily store measurements from master INS and slave INS in real time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.9-16
• /
• 2014

The localization compensation algorithm for moving objects using the least-squares method is suggested and the performance of the algorithm is analyzed in this paper. The suggested compensation algorithm measures the distance values of the mobile object moving as a constant speed by the TMVS (TWR Minimum Value Selection) method, estimates the location of the mobile node by the trilateration scheme based on the values, and the estimated location is compensated using the least-squares method. By experiments, it is confirmed that the localization performance of the suggested compensation algorithm is largely improved to 58.84% and 40.28% compared with the conventional trilateration method in the scenario 1 and 2, respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.694-699
• /
• 2009

This paper presents the implementation of the real-time object tracking control of the ROBOKER head. The visual servoing technique is used to track the moving object, but suffers from ill-estimated Jacobian of the virtual link design. To improve the tracking performance, the RBF(Radial Basis Function) network is used to compensate for uncertainties in the kinematics of the robot head in on-line fashion. The reference compensation technique is employed as a neural network control scheme. Performances of three schemes, the kinematic based scheme, the Jacobian based scheme, and the neural network compensation scheme are verified by experimental studies. The neural compensation scheme performs best.