• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.165-182
• /
• 2009

Mobile IPv6 spends considerable bandwidth considering that its signal volume is proportional to the mobile and also it should be strengthened to support the binding signal volume, the traffic, and effective mobility. So, the study in NEMO(Network Mobility), an extended version of Mobile IPv6, has been conducted. NEMO provides its mobility by putting several mobiles and more than one portable router into one unit called as mobile network. Because nodes access Internet via the portable router at this time, it receives transparency without any additional work and that much reduces binding signal while solving binding storm. By supporting mobility, NEMO is able to have various mobile structures which realize several networks hierarchically and it is necessary to improve its safety and security by authenticating among the upper networks or the lower ones while moving. Also, it is extremely required to begin a study in the device to improve efficiency accompanied with mobility, which is executed by the fast hand-off as well as the safe authentication. For those reasons, this paper not only classifies various NEMO mobile scenarios into 7 ways, but also provides AAA authentication of each scenario, the authentication through the safety authentication and fast handoff authentication using F+HMIPv6 and the way to reduce both signaling volume and packet delays efficiently during the handoff.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.60-67
• /
• 1998

The effects of moisture content (MC) and diffusion period on the diffusion of boron from borate rod through Pinus densiflora and P. koraiensis were investigated as a preliminary research of integrated remedial treatment for heritage wooden structures using borate rod. After equilibrating MCs of samples (15, 25, and 40%), borate rod (1,000 mg) was inserted into the sample, and stored for diffusion of boron at room temperatures ($23^{\circ}C$) for 2, 4, 8, and 12 weeks. Wafers were serially cut at constant intervals from rod treatment point and the boron penetration through longitudinal and transverse direction was measured by staining with boron indicator. For boron diffusion, MC above fiber saturation point was needed, and the diffusion rates increased with time. The fastest rates of diffusion were observed in longitudinal direction, followed by the radial and then the tangential direction. The rates of diffusion in all directions were the fastest in P. koraiensis. In P. densiflora, the diffusion rates through heartwood was faster than that in sapwood in longitudinal direction and vice versa in transverse direction. Based on the best result of this study, optimal space between rod insertion points could be recommended as follows; approximately 120 mm for P. koraiensis and heartwood of P. densiflora, 60 mm for sapwood of P. densiflora in longitudinal direction, and approximately 30 mm for all species tested in transverse direction. However, the effect of rod size and long-term exposure for diffusion on boron movement should be fully investigated for the accurate evaluation of optimal space between rod holes.

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.25-38
• /
• 2009

The Gyeongju Seokbinggo (Treasure No. 66) is an ice-storing stone warehouse, consisting mainly of alkaligranite which shows milky white color and medium-grained textures with drusy cavities. As results of deterioration assessment, the deterioration rates were determined as crack (12.5%), disjoining (6.7%), breaking-out (25.1%), exfoliation (20.9%), efflorescence (6.5%), brown discoloration (9.8%), darkgray discoloration (2.0%) and biological discoloration (36.5%). Comprehensive physical deterioration rate and discoloration rate were calculated as 43.7% and 68.7%, respectively, that indicates the Seokbinggo has been severely weathered. Indoor relative humidity was above 90% except in winter season. Indoor microclimate was hardly fluctuating although indoor microclimate was dependent on the outdoor climate. The main cause of deterioration was high relative humidity and a long time of wetness due to penetration of rain, underground water and condensation. It was identified that the water brought out biological discoloration, dissolution of minerals, structural movement and efflorescence, and the dust from the ground soil in front of the entrance accelerated brown and dark gray discoloration on the stone surface.

• Ecology and Resilient Infrastructure
• /
• v.2 no.3
• /
• pp.216-223
• /
• 2015

The conservation project to protect an endangered fish, Gobiobotia naktongensis was executed against declining the gene diversity of the fish after the construction of Youngju Dam in a sand-bed stream (Naeseongcheon Stream). We tried to move the populations of G. naktongensis from submerged planned sites to alternative habitats, bred artificially and augmented the juveniles to optimal habitat, and monitored the results of the restoration implementation. No entity of G. naktongensis was confirmed at the planned submerged sites despite attempting to capture more than 8 times and eventually the movement to alternative habitat could not be implemented. About 40 individuals of G. naktongensis were captured in the Naeseongcheon Stream and a total of 5,000 individuals were artificially spawned up. The population of juvenile inherited the genetic diversity from the brood stock. The bred juveniles were discharged at the selected optimal site that had a habit condition what was similar to their natural habitat. The micro-dispersion around the discharging area was found at the early stages of the augmentation. The re-capturing rate of discharged juveniles was reduced as time passed. The discharged juveniles seemed to adapt to the natural environment of Naeseongcheon Stream. The observation of their high abdominal distension and excrement demonstrated that the juveniles fed successfully in the discharging area. Therefore, securement of genetic homogeneity and enhancement of restoration population of G. naktongensis in upstream and downstream of Youngju Dam site from the artificial seed producing seemed to be primarily successful and long-term monitoring and analysis of the effect was expected to be necessary.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.165-173
• /
• 2005

Field observations have been conducted to investigate the physical environment around oyster farms in Gamak Bay. Tidal waves near the two channels at the northeast and south of the bay had almost the same amplitudes and phases. Water temperature responded sensibly to the tides, rising at high water and falling at low water, except for the northwest region. The currents more regularly varied in accordance with a tidal period as long as they are at the faster-flowing region. A considerable flow has been found near the seabed of the northwest of the bay, normally known to be a stagnant area, and also the flow was opposite to the surface flow. Average moving speeds and directions of the flow at each station coincided well with patterns of the residual currents computed by Lee ef al. [2004], except for the northwest region. The discrepancy for the northwest region is not clear but it may have resulted from the facts that the computed flow pattern represents only the case of spring tide and in addition, a northwesterly wind prevailed all the observation time.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.25-32
• /
• 2004

Purpose : The simulator is used to determine patient field and ensure the treatment field, which encompasses the required anatomy during patient normal movement such as during breathing. The latest simulator provide real time display of still, flouroscopic and digitalized image, but conventional simulator is not yet. The purpose of this study is to introduce digital image capture system(DICS) using conventional simulator and clinical case using digital captured still and flouroscopic image. Methods and materials : We connect the video signal cable to the video terminal in the back up of simulator monitor, and connect the video jack to the A/D converter. After connection between the converter jack and computer, We can acquire still image and record flouroscopic image with operating image capture program. The data created with this system can be used in patient treatment, and modified for verification by using image processing software. (j.e. photoshop, paintshop) Result : DICS was able to establish easy and economical procedure. DCIS image was helpful for simulation. DICS imaging was powerful tool in the evaluation of the department specific patient positioning. Conclusion : Because the commercialized simulator based of digital capture is very expensive, it is not easily to establish DICS simulator in the most hospital. DICS using conventional simulator enable to utilize the practical use of image equal to high cost digitalized simulator and to research many clinical cases in case of using other software program.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.65-85
• /
• 2011

In this essay, Japanese animator Kihachiro Kawamoto's works will be analyzed. Kawamoto made Breaking of Branches is Forbidden in 1968 and was famous for puppet animation as The Demon(1972), Dojoji Temple(1976) and House of Flame(1979) used Japanese traditional elements in his works. The themes are the agony and despair of a human being, and the narrative is developed dramatically. This is possible through a variety of techniques in animation expression. For example of this are the movement of the puppets and the lighting. In the case of Kawamoto's works, above all, it can be said that the dramatic development depends on editing - the relation of each shot to the next shot. Therefore, this analysis will focus especially on the editing of The Demon, Dojoji Temple and House of Flame. Kawamoto's method of editing will be examed and the analysis will confirm that classical continuity edting by controling space and time has been used. Namely that the effect of editing enhances dramatic development of the narrative on Kawamoto's works. This study will also discuss the benefit of using cinematic methods of in animation. Eventhough it is not essential, Kawamoto chooses cinematic method editing. Through their use, he is able to absorb the audience in the traditional Japanese world which ordinarily could be too difficult to understand through puppet animation.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.41-63
• /
• 2011

Many educational facilities have been formed due to the nation's revival policy in the animation industry since about 1995. Owed to the active financial support of the nation, the production industry rapidly vitalized, production technology rapidly advanced, and a large workforce is being passed on into society through educational institutions. The reality of many developing countries appearing to be putting emphasis on the industrialization of animation, similar to our country, is becoming a great pressure on us industrially. It is never easy to develop a certain field into a globally competitive industry in a short period of time. Our countermeasure, pursuant to these international circumstances, lies in innovation and creativity that has broken away from the existing methods of production, and mass production of high quality animation specialists. This paper is a new educational proposition for the consolidation of national competitiveness. Animating, the core of producing an animation, completely depends on the animator's artistic and technical ability. In order to supplement the existing methods of studying by theory and make up for the biggest weak point, which is the lack of "on the scene" learning contents, I propose incorporating movements based on frequently appearing characters in popular animations and acting them out slowly and including the "Slow Motion" kinetic effect, a way of enabling someone to learn and sense astrodynamic fundamental principles by oneself. It is a new method of learning movement, a plan made to achieve sensual performance gestures, and an improvement in direction for students who wish to become animators in the future.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2018

This study covers the selection of systems measuring the behaviour of the slender structure in the underwater environment and its performance assessment. From a comparison of an instrumentation system that can measure the continuous behaviour along the entire length of the slender structure, the underwater camera system is finally selected as the most appropriate semi-permanent measurement system for Deep-sea Ocean Engineering Basin of KRISO. An experiment on the rigid pipes for a basic performance evaluation of the underwater camera is conducted in this study. The motion of a top excited rigid pipe is measured with the utilization of the underwater camera system. The performance of the underwater camera is evaluated by comparing the movement of a pipe measured by the underwater camera with the measured input signals. Through the top excitation experiment for the slender structure, the real-time three-dimensional measurement of the underwater camera system is qualitatively evaluated in this case. The developed underwater camera system can apply to the system to measure dynamic behaviour of a slender structure and mooring line in Deep Ocean Engineering Basin.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.114-125
• /
• 2002

In this paper, we are proposing a hierarchical segmentation method that first segments the video data into units of shots by detecting cut and dissolve, and then decides types of camera operations or object movements in each shot. In our previous work[1], each picture group is divided into one of the three detailed categories, Shot(in case of scene change), Move(in case of camera operation or object movement) and Static(in case of almost no change between images), by analysing DC(Direct Current) component of I(Intra) frame. In this process, we have designed two-stage hierarchical neural network with inputs of various multiple features combined. Then, the system detects the accurate shot position, types of camera operations or object movements by searching P(Predicted), B(Bi-directional) frames of the current picture group selectively and hierarchically. Also, the statistical distributions of macro block types in P or B frames are used for the accurate detection of cut position, and another neural network with inputs of macro block types and motion vectors method can reduce the processing time by using only DC coefficients of I frames without decoding and by searching P, B frames selectively and hierarchically. The proposed method classified the picture groups in the accuracy of 93.9-100.0% and the cuts in the accuracy of 96.1-100.0% with three different together is used to detect dissolve, types of camera operations and object movements. The proposed types of video data. Also, it classified the types of camera movements or object movements in the accuracy of 90.13% and 89.28% with two different types of video data.