• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.240-244
• /
• 1993

There are so many types of sensors which have been developed in order to construct intelligence robots. This paper presents the study of the movement of a vehicle robot using a CCD-Camera. The CCD-Camera is used as a sensor to control a vehicle robot in a stable movement. This vehicle robot is called CVR. The system is the combination of the CCD-Camera, the vehicle robot and a dedicated software controller. The stability of CVR is proven by studying the movement methodology. The performance of the movement is experimented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제26권11호
• /
• pp.2237-2244
• /
• 2002

This research develops a low-cost and high accuracy kinematic calibration method based on the following principles: 1) the platform locations are accurately measured by a constrained movement to inspect a calibration target; 2) the constrained movement is chosen to guarantee the parameter observability; 3) the mechanical fixture to constrain the movement and the sensor to check the constrained movement are implemented by low-cost and high-accuracy devices; 4) the calibration is easily done at an industrial environment. The kinematic parameters calibrated with respect to a single plane aren't influenced due to the misalignment of the plane. A parameter observability is successfully obtained even through one planar constraint, which guarantees that all kinematic parameters are estimated by minimizing the cost function.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1190-1193
• /
• 2004

The purpose of this study is to evaluate the possibility of identifying joint damping property through commercially available isokinetic ergometer (BIODEX). The proposed method is to estimate the damping torque of the knee joint from the difference between the external joint torque for maintaining isokinetic movement and the gravity torque of the lower leg. The damping torque was estimated at various joint angular velocities, from which the damping property would be derived. Measurement setup was composed of the BIODEX system with an external force sensor and Labview system. Matlab was used in the analysis of the damping property. The experimental result showed that the small variation in angular velocity due to acceleration and deceleration of the crank arm resulted in greater change of inertial torque than the damping torque, so that the estimation of damping property from the isokinetic movement is difficult.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.474-474
• /
• 2000

This paper shows that a system with two-link arm can obtain hand reaching movement to a target object projected on a visual sensor by reinforcement learning using a layered neural network. The reinforcement signal, which is an only signal from the environment, is given to the system only when the hand reaches the target object. The neural network computes two joint torques from visual sensory signals, joint angles, and joint angular velocities considering the urn dynamics. It is known that the trajectory of the voluntary movement o( human hand reaching is almost straight, and the hand velocity changes like bell-shape. Although there are some exceptions, the properties of the trajectories obtained by the reinforcement learning are somewhat similar to the experimental result of the human hand reaching movement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.431-432
• /
• 2018

Humans have used acceleration sensors to perceive behavior. Using the application principles of inertia sensor such as acceleration and gyro sensors, the sensor indirectly measures movement through forces applied on a three-dimensional axis. This may result in different results depending on the location of the sensor in possession, even in the same way. The sensor, which is also mounted on popular smartphones, measured different values of acceleration sensors, whether in hand or in pocket, which are commonly used by people.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.375-377
• /
• 2009

This paper researched the algorithm of robot's walking and action on the basis of robot studied and made at our laboratory and studied how to efficiently control the robot joints by developing wireless Digital Servo Motor using Zigbee Sensor Network Module which is using at wide part recently. I realized the stable walking by adopt Press Sensor at the bottom of robot foot to get stability of walking. Also I let the algorithm calculate the robot movement to make the joint motion and monitored the robot walk to its motion. At this Paper, I studied the method organizing the motion by the each robot walking and measuring the torque applying to the joint. And I also knew that it is possible to make its control and construct hardware more conveniently than them of the existing studied and controling 2Legs Walking Robot by applying it at walking robot and developing wireless servo motor by Zirbee Sensor Network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.725-727
• /
• 2010

For simulation of Boat motion, pitch, motion element of roll and yaw direction could simulated. The combination of the marine use various multi sensor surveillance system technology with the development of servo motion control algorithm and gyro sensor in six freedom motion is implemented to analyze the movement response. The stabilization of the motion control is developed and Nano driving Precision Pan-Tilt/Gimbal system is obtained from the security positioning cameras with ultra high speed device is used to carry out the exact behavior of the device.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.597-600
• /
• 1994

A Robot system to realize a painting using a writing brush is explained here. Based on the three-dimensional data about the target china, the movements of the writing brush is determined. The movement is realized by the movement of two robot manipulators which move coordinatedly. Experimental results reveals the applicability of one system.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1097-1098
• /
• 2008

In this paper We are going experiment which can happen at the movement of the robot to reduce the Systematic distance error. The system get the experiment result by using BLDC Motor, Encoder, ultrasonic sensor. The Embedded XP is adopted as an operating system, And The robot was controlled by using RS232.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권9호
• /
• pp.5440-5445
• /
• 2014

Many studies have examined robot control using human bio signals but complicated signal processing and expensive hardware are necessary. This study proposes a method to recognize a human's hand motion using a low-cost EMG sensor and Flex sensor. The method to classify movement of the hand and finger is determined from the change in output voltage measured through MCU. The analog reference voltage is determined to be 3.3V to increase the resolution of movement identification through experiment. The robotic hand is designed to realize the identified movement. The hand has four fingers and a wrist that are controlled using pneumatic cylinders and a DC servo motor, respectively. The results show that the proposed simple method can realize human hand motion in a remote environment using the fabricated robotic hand.