• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.12a
• /
• pp.31-42
• /
• 2007

Dc resistivity monitoring has been increasingly used in order to understand the changes of subsurface conditions in terms of conductivity. The commonly adopted interpretation approach which separately inverts time-lapse data may generate inversion artifacts due to measurement error. Eventually the contaminated error amplifies the artifacts when reconstructing the difference images to quantitatively estimate the change of ground condition. In order to alleviate the problems, we defined the subsurface structure as four dimensional (4-D) space-time model and developed 4-D inversion algorithm which can calculate the reasonable subsurface structure continuously changing in time even when the material properties change during data measurements. In this paper, we discussed two case histories of resistivity monitoring to study the ground condition change when the properties of the subsurface material were artificially altered by injecting conductive materials into the ground: (1) dye tracer experiment to study the applicability of electrical resistivity tomography to monitoring of water movement in soil profile and (2) the evaluation of cement grouting performed to reinforce the ground. Through these two case histories, we demonstrated that the 4-D resistivity imaging technique is very powerful to precisely delineate the change of ground condition. Particularly owing to the 4-D inversion algorithm, we were able to reconstruct the history of the change of subsurface material property.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.115-121
• /
• 2003

A new Layered Manufacturing(LM) system, named PaperMill, is developed applying micro milling technology. A micro endmill(127 11m in diameter) is introduced as the cutter of build material. The selected build material for this system is an adhesive-coated paper roll which provides advantages such as good bonding between layers, machinability, and low material cost. A 3-axis CNC controller and three step-motors are used for the movement of X-Y-Z table of the system. For simplicity of the control of mechanism, the control system for feeding the paper roll is uncoupled from CNC controller. Two code converters are developed for the toolpath generation of the new LM system. The NC converter generates a set of NC codes for PaperMill using commercial CAM software while the SML converter generates an NC code from Quickslice's SML format. The NC codes generated from the converters consist of a series of profile data and trigger code for paper feeding. Two sample gears were fabricated to prove the concept of the system, which shown that the dimensional errors of the fabricated gears is under 3.4 percent.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.295-301
• /
• 2006

A new combustion method of high compression ratio SI engine was studied and proposed in order to achieve high thermal efficiency, comparable to that of CI engine. Compression ratio of SI engine is generally restricted by the knocking phenomena. A combustion chamber profile and a cranking mechanism were studied to avoid knocking with high compression ratio. Because reducing the end-gas temperature will suppress knocking, a combustion chamber was considered to have a wide surface at the end-gas region. However, wide surface will lead to large heat loss, which may cancel the gain of higher compression ratio operation. Thereby, a special cranking mechanism was adapted which allowed the piston to move rapidly near TDC. Numerical simulations were performed to optimize the cranking mechanism for achieving high thermal efficiency. An elliptic gear system and a leaf-shape gear system were employed in numerical simulations. Livengood-Wu integral, which is widely used to judge knocking occurrence, was calculated to verify the effect for the new concept. As a result, this concept can be operated at compression ratio of fourteen using a regular gasoline. A new single cylinder engine with compression ratio of twelve and TGV(Tumble Generation Valve) to enhance the turbulence and combustion speed was designed and built for proving its performance. The test results verified the predictions. Thermal efficiency was improve over 10% with compression ratio of twelve compared to an original engine with compression ratio of ten when strong turbulence was generated using TGV, leading to a fast combustion speed and reduced heat loss.

• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.7-11
• /
• 2007

We confirm the validity of the analytic expression for the temperature of the Joule heated nano-wire [C.-Y. You et al. Appl. Phys. Lett. 89, 222513 (2006)] with finite element method. The temperature of the Joule heated nano-wire is essential information for the research of the current induced domain wall movement. The analytic expression includes an adjustable parameter which must be determined. Since the physical origin of the adjustable parameter is simplification of the heat source profile, the validity of the analytic expression must be examined for wide range of the nano-wire structure. By comparison with this analytic expression with the results of full numerical finite element method, the adjustable parameter has been determined. The numerically confirmed adjustable parameter values are in the range of 0.60$\sim$0.69, which is well matched with the theoretically expected one. Furthermore, it is found that the adjustable parameter is a slow varying function of the nano-wire geometry. Based on this numerical confirmation, we can apply the analytic expression for the wide range of the nano-wire geometry with proper adjustable parameters.

• PNF and Movement
• /
• v.3 no.1
• /
• pp.17-26
• /
• 2005

Objectives : The purpose of this study is to identify influence that PNF method have an effect in function restoration of the impaired patients of central nervous system. Methods : The data were collected by 15 adult stroke patients. The treatment was based on proprioceptive neuromuscular facilitation techniques. Temporal and spatial parameters of gait were analysed for using the computerized GAITRite system. Results : In the comparison of functional ambulation profile(FAP) before and after experiment, the FAP was significantly increased in the PNF method. The gait velocity, cadence and single support time asymmetry ratio was significantly increased in the PNF method. The Motor Assessment Scale was significantly increased in the PNF method. Conclusions : Based on these results, it is concluded that the forced PNF method for 6 weeks can be improve the temporal-spatial gait parameters including FAP in hemiplegic patients. Therefore, the forced PNF method is useful to improve the function restoration in hemiplegic patients. Further study should be done to analyze the effects of intervention duration of treatment, optimal time to apply the treatment in more long peried.

• Journal of Integrative Natural Science
• /
• v.14 no.3
• /
• pp.107-115
• /
• 2021

The demand for traceability of meat and livestock supply chains is growing due to the high-profile incidents of hormonal contamination. E. coli, dioxin, BSE, and antibiotics have been recorded. In this paper, we present blockchain-based poultry information management system design and implementation using Hyperledger Fabric. The proposed system offers accurate, decentralized, immutable and consensus process that promote trust and transparency between stakeholders. The main tasks of the system include the recording of the information associated with poultry rearing (from a hatchery to a farm), status report of the farm activities on a monthly basis. The system can track movement of docks through the supply chain until delivery to the final consumer through the retail outlet. The ability to trace the source of livestock product through all the stages of rearing/production, processing and distribution is essential for ensuring food safety as recall of contaminated product can easily be done thereby increasing consumer confidence.

• PNF and Movement
• /
• v.16 no.3
• /
• pp.355-363
• /
• 2018

Purpose: The purpose of this study was to obtain detailed and quantified data concerning the effects of plantarflexor muscle fatigue induced in the non-paretic side on the spatial and temporal gait parameters of the bilateral lower extremities during walking in stroke patients. Methods: This study was conducted on 20 patients with chronic stroke. The load contraction fatigue test was applied to induce muscle fatigue in the non-paretic plantarflexor muscle. Step length, stride length, double support, gait velocity and cadence, and functional ambulatory profile (FAP) score in the bilateral lower extremities were measured using a gait analysis system in order to investigate changes in temporal and spatial gait parameters caused by muscle fatigue on the non-paretic side. The statistical significance of the results was evaluated using a paired t-test. Results: A review of the results for gait parameters revealed a significant increase in double support (p<0.05) and a significant decrease in step length, stride length, gait velocity and cadence, and FAP score (p<0.05). Conclusion: These results indicate that the muscle fatigue in the non-paretic side of the stroke patients also affected the paretic side, which led to a decrease in gait functions. This implies a necessity to perform exercise or training programs in a range of clinical aspects not causing muscle fatigue.

• Clinical and Experimental Pediatrics
• /
• v.62 no.8
• /
• pp.312-316
• /
• 2019

Purpose: The major side effects of treatment with oxcarbazepine (OXC) are skin rash and hyponatremia. Hematologic side effects are reported rarely. The aim of this study was to investigate the rate and types of the hematologic side effects of OXC. Methods: The medical records of 184 patients diagnosed with epilepsy or movement disorder and on OXC monotherapy, at the Department of Pediatrics of Inje University Sanggye Paik Hospital from July 2001 to July 2018, were retrospectively reviewed. Results: Of the 184 patients, 10 (5.4%) developed leukopenia in addition to pancytopenia and 2 (1.0%) developed pancytopenia. Leukopenia developed in 11 days to 14 years after OXC administration and was more frequent in males than in females (male vs. female, 9 vs. 1; Fisher exact test, P<0.05). Of the eight patients with leukopenia alone, 7 continued OXC treatment; 6 improved without intervention; 1 was lost to follow-up; and 1 received a reduced OXC dose, who improved after intervention. Pancytopenia developed within 2 months of initiation of OXC treatment. Both patients initially continued OXC. One improved within 1 month and continued treatment with OXC, but the other showed progression of the side effect, leading to the discontinuation of OXC and subsequent improvement within 1 month. There were no significant differences in the ages of the patients, OXC dose, and duration of OXC treatment between patients with and without these side effects of OXC (P>0.05, t-test). Conclusion: OXC-induced leukopenia is not rare and may result in pancytopenia. Patients being treated with OXC should be regularly monitored for abnormal complete blood count profiles.

• PNF and Movement
• /
• v.11 no.1
• /
• pp.79-88
• /
• 2013

Purpose : Currently, ICF to describe the functions and disability in the world has been used as a universal language. ICF tools based on ICF, the rehabilitation management of clients have been developed to be efficient. This study was designed to describe clinical decision for functional goal of clients to used ICF tools. Methods : In the following the utilization of all developed ICF tools will be described within a case example of a 53-year-old women, suffering from cerebellum disorder. As problems in the subject's functional activities was difficulties in changes sitting postures, standing postures and maintaining standing postures. Activity limitation was determined change sitting, standing posture as a goal through discussion with the patient. Results : After setting the identified problems as the purpose of intervention through the assessment, we find out the outcomes using the ICF evaluation display. Consequently, with functional activities limitation that discovered from assessment(categorical profile, assessment sheet), sitting postures to standing postures and maintaining standing postures were improved. Conclusion : This study was showed ICF tools based on Rehab-cycle for the patient's functional goals clinical practice. The future study, the ICF in clinical practical tools for effective use will require more attempt.