• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.575-600
• /
• 2024

During an earthquake on December 29th 2020, the Krško NPP automatically shutdown due to the trigger of the negative neutron flux rate signal on the power range nuclear instrumentation. From the time course of the detector signal, it can be concluded that the fluctuation in the detector signal may have been caused by the mechanical movement of the ex-core neutron detectors or the pressure vessel components rather than the actual change in reactor power. The objective of the analysis was to evaluate the sensitivity of the neutron flux at the ex-core detector position, if the detector is moved in the radial or axial direction. In addition, the effect of the core barrel movement and core inside the baffle movement in the radial direction were analysed. The analysis is complemented by the calculation of the thermal and total neutron flux gradient in radial, axial and azimuthal directions. The Monte Carlo particle transport code MCNP was used to study the changes in the response of the ex-core detector for the above-mentioned scenarios. Power and intermediate-range detectors were analysed separately, because they are designed differently, positioned at different locations, and have different response characteristics. It was found that the movement of the power range ex-core detector has a negligible effect on the value of the thermal neutron flux in the active part of the detector. However, the radial movement of the intermediate-range detector by 5 cm results in 7%-8% change in the thermal neutron flux in the active part of the intermediate-range detector. The analysis continued with an evaluation of the effects of moving the entire core barrel on the ex-core detector response. It was estimated that the 2 mm core barrel radial oscillation results in ~4% deviation in the power and intermediate-range detector signal. The movement of the reactor core inside baffle can contribute ~6% deviation in the ex-core neutron detector signal. The analysis showed that the mechanical movement of ex-core neutron detectors cannot explain the fluctuations in the ex-core detector signal. However, combined core barrel and reactor core inside baffle oscillations could be a probable reason for the observed fluctuations in the ex-core detector signal during an earthquake.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.217-228
• /
• 2004

In this thesis, we suggest questionnaire which is designed to understand of what employees include executive think about 6 sigma management movement and to find important factor for strategic of success 6 sigma management movement of K. Corporation. This thesis is composed of 2 parts, one is questionnaire design and the other is questionnaire analysis. We find important factor for strategic of success 6 sigma management movement of K. Corporation by using correlation and regression analysis, which results very useful and great help for K's Co. In questionnaire analysis, we use by minitab package version 13.2.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1699-1704
• /
• 2005

In this research the energy degrader, which is the most fragile part of the security of a target, has been newly designed to improve the performance of the gas target. Also, the numerical analysis of the heat movement and mechanical movement during the operation of the target has been accomplished. The heat analysis and structure analysis which are using the cooling water flow and pressure in the energy degrader and the Nastran mediocrity finite element analysis program, has been considered with the heat movement and mechanical movement according to the current capacity of proton beam which determines the production yield of the radioactive isotope. Also the possible use range has been determined, and at the same time the most suitable running condition according to the current capacity of proton beam has been suggested.

• 한국지반공학회지:지반
• /
• 제13권5호
• /
• pp.133-144
• /
• 1997

기존에 발생된 토석류 퇴적물에 대한 점도실험으로북터 세립질의 성질이 빙함 소성(Bingham plastic) 모델로 표현될 수 있다는 사실이 판명되었다. 이러한 사실과 비뉴톤유체의 흐름을 해석 할 수 있도록 개발된 수치해석 프로그램 Polyflow를 이용하여 토석류의 이동을 해석하였다. 그 결과 실제와 유사한 이동결과가 얻어졌으므로 토석류의 이동은 이와 같은 기법으로 해석할 수 있다는 것을 알게 되었다.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.24-31
• /
• 2006

The energy degrader is the most fragile part of the security of a target, has been newly designed to improve the performance of the gas target. Also, the numerical analysis of the heat movement and mechanical movement during the operation of the target has been accomplished. The heat analysis and structure analysis which are using the cooling water flow and pressure in the energy degrader and the finite element analysis program, has been considered with the heat movement and mechanical movement according to the current capacity of proton beam which determines the production yield of the radioactive isotope. Also the possible use range has been determined and at the same time the most suitable running condition according to the current capacity of proton beam has been suggested.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 정보화시공 학술발표회
• /
• pp.103-122
• /
• 2001

For prediction of ground movement per the excavation step, observational results of ground movement during the construction was very different with prediction during the analysis of design. step because of the uncertainty of the numerical analysis modelling, the soil parameter, and the condition of a construction field, etc. however accuratly numerical analysis method was applied. Therefore, the management system through the construction field measurement should be achieved for grasping the situation during the excavation. Until present, the measurement system restricted by ‘Absolute Value Management system’only analyzing the stability of present step was executed. So, it was difficult situation to expect the prediction of ground movement for the next excavation step. In this situation, it was developed that ‘The Management system TOMAS-EXCAV’ consisted of ‘Absolute value management system’ analyzing the stability of present step and ‘Prediction management system’ expecting the ground movement of next excavation step and analyzing the stability of next excavation step by‘Back Analysis’. TOMAS-EXCAV could be applied to all uncertainty of earth retaining structures analysis by connecting ‘Forward analysis program’ and ‘Back analysis program’ and optimizing the main design variables using SQP-MMFD optimization method through measurement results. The application of TOMAS-EXCAV was confirmed that verifed the three earth retaing construction field by back analysis.

• The Journal of Korean Physical Therapy
• /
• 제32권1호
• /
• pp.21-28
• /
• 2020

Purpose: This study identified the effects of physical therapists on the quality of life when applying exercise-based movement techniques to breast cancer survivors. Methods: To conduct meta-analysis, 186 RCT studies were searched in five databases (RISS, Pubmed, CINAHL, Medline, and Cochrane Library), without limitation, for the year of publication, and papers published in April 2018 were selected. Four studies met the inclusion criteria and were selected for meta-analysis based on the risk of bias. The basic demographic data, athletic characteristics, and outcome data were extracted from all included clinical trials. The data were analyzed using the RevMan 5.2 program. Results: As a result of meta-analysis, exercise-based movement techniques applied by the control group (Pilates, yoga, tai chi, and qigong) or physical therapists showed no significant difference in the impact on the quality of life of breast cancer survivors. Conclusion: In this study, exercise-based movement techniques mediated by control groups or physical therapists showed no significant difference in the quality of life of breast cancer survivors, but the types and duration of exercise in each study varied, and the number of subjects was small. Considering randomized studies, more randomized studies will be needed to draw conclusions.

• 한국전문물리치료학회지
• /
• 제24권4호
• /
• pp.77-83
• /
• 2017

Background: Shoulder external rotation exercises are commonly used to improve the stabilizing ability of the infraspinatus. Although the side-lying wiper exercise (SWE) is the most effective shoulder external rotation exercise to maximize infraspinatus activity, the effect of adduction force on the infraspinatus and posterior deltoid has not been demonstrated. Objects: This study was conducted to investigate whether horizontal adduction force increases infraspinatus activity and decreases posterior deltoid activity. Methods: Twenty-eight healthy subjects (male: 21, female: 7; $age=23.5{\pm}1.8years$; $height=170.1{\pm}7.4cm$; $weight=69.4{\pm}9.6kg$) were recruited. Subjects were asked to perform the SWE under two conditions: (1) general SWE and (2) SWE with adduction force using pressure biofeedback. Surface electromyography (EMG) signals of the infraspinatus and posterior deltoid were recorded during SWE. Paired t-tests were used to compare the EMG activity of the infraspinatus and posterior deltoid between the two conditions. Results: Posterior deltoid muscle activity was significantly decreased following SWE with adduction force ($7.53{\pm}4.52%$) relative to general SWE ($11.68{\pm}8.42%$) (p<.05). However, there was no significant difference in the infraspinatus muscle activity between the SWE with adduction force ($28.33{\pm}12.16%$) and the general SWE ($26.54{\pm}13.69%$) (p>.05). Conclusion: Horizontal adduction force while performing SWE is effective at decreasing posterior deltoid activity.

• The Journal of Korean Physical Therapy
• /
• 제25권2호
• /
• pp.88-95
• /
• 2013

Purpose: The purpose of this study was to conduct an analysis of kinematics of lower extremities and trunk in stance phase of walking according to turning direction. Methods: Ten university students (five male, five female) who were in their 20s (mean age was 20.6 years old) participated in this study. Participants did not have participants did not have any problem with skeletal muscular system. We used the "Qualisys motion capture system" for analysis of trunk and lower extremity movement in stance phase of walking according to turning direction. We collected data while subjects walked a distance of 10 m, and at the 6 m line, subjects were required to turn to the left side and the right leg was positioned in stance phase and the left leg was positioned in swing. For data analysis, the SPSS for Windows ver. 20.0 statistics program was used in performance of one way analysis of variance according to turning direction. Results: Significant difference of trunk and lower extremities was observed for turning direction according to walking cycle (p<0.05). Upper trunk movement showed a greater increase at three dimensions than lower trunk, and in heel off phase, pelvic movement showed a greater increase than lower trunk (p<0.05). In 45 degree and 90 degrees of turning direction, all movements of trunk and lower extremities were significantly different among three events of stance phase (p<0.05). Conclusion: We suggest that three-dimensional movement analysis of trunk and lower extremities during turning movement was very important in order to indicate increasing balance or walking ability for people with impaired movement or walking.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권2호
• /
• pp.115-127
• /
• 2016

Shoulder pain, injury and discomfort are public health and economic issues world-wide. The function of these joints and the stresses developed during their movement is a major concern to the orthopedic surgeon to study precisely the injury mechanisms and thereby analyze the post-operative progress of the injury. Shoulder is one of the most critical joints in the human anatomy with maximum degrees of freedom. It mainly consists of the clavicle, scapula and humerus; the articulations linking them; and the muscles that move them. In order to understand the behavior of individual muscle during abduction arm movement, an attempt has been made to analyze the stresses developed in the shoulder muscles during abduction arm movement during the full range of motion by using the 3D FEM model. 3D scanning (ATOS III scanner) is used for the 3D shoulder joint cad model generation in CATIA V5. Muscles are added and then exported to the ANSYS APDL solver for stress analysis. Sensitivity Analysis is done for stress and strain behavior amongst different shoulder muscles; deltoid, supraspinatus, teres minor, infraspinatus, and subscapularies during adduction arm movement. During the individual deltoid muscle analysis, the von Mises stresses induced in deltoid muscle was maximum (4.2175 MPa) and in group muscle analysis it was (2.4127MPa) compared to other individual four rotor cuff muscles. The study confirmed that deltoid muscle is more sensitive muscle for the abduction arm movement during individual and group muscle analysis. The present work provides in depth information to the researchers and orthopedicians for the better understanding about the shoulder mechanism and the most stressed muscle during the abduction arm movement at different ROM. So during rehabilitation, the orthopedicians should focus on strengthening the deltoid muscles at earliest.