• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.34-39
• /
• 1996

In many industrial applicatiosns such as machine tools and automation equipments the control performance of the feed-drive systems as positioning devices of the tools and workpieces have great influences on the quality of related machines. For many electrically driven mechanical feed systems resilient couplings between motors and mechanical elements which mostly consist of elasttic shafts and gears often are unavoidable. Commonly these systems can be regarded as an elastic multi-mass systems can be regarded as an elastic multi-mass system which is dealt with this contribution. S high performance speed or position control can only be achieved with the considering of the mechanical elastic characteristics of the system. n this paper some practic characteristics of the system In this paper some practical information is given about experience in modeling design simulation and experiments for linear elastic multi-mass system,

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.35-42
• /
• 2008

By the reason of increased demand of high productivity and quality, the manufacturer have an effort in many directions of a machine tool industries. Among there, we proposed method of decreasing displacement in MC(machining center). In other words, Quality related with vibration of a tool cutting products. For decreasing it, improved by optimizing a shape of the column-part and acceleration curves of motors. In this paper we could find design factors has much influence on decreasing the displacement using the DOE(Design of Experiments) and optimized the level of the factors using $ADAMS^{(R)}$ and $MINITAB.^{(R)}$ And we suggest optimized a acceleration curve using $Matlab^{(R)}$.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.70-76
• /
• 2007

The purpose of this study is to analyze the characteristics of a domestic developed hydraulic axial piston motor. An experimental apparatus was constructed and the output torque, the input oil pressure, the input flow rate, the speed of motor and oil temperature were measured. They were measured under both no load and load conditions. The results are as follows; 1. Motion of motor became steady state conditions after 5 seconds. 2. Output torque of motor was proportional to input oil pressure under both load and unload. 3. Speed of motor decreased with increasing load. 4. Oil temperature was almost constant. The results of this study will offer the basic data in designing and operating hydraulic axial piston motors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.774-779
• /
• 2001

If rotating machinery have a fault, we can detect it using vibration or noise signals. However some maintenance engineers who doesn't have expert knowledge, needs the help of vibration experts for diagnosing rotating machinery. But qualified experts are rare, therefore we have been developed the case based reasoning (CBR) system which is able to manipulate the past experiences of vibration diagnosis experts. In the CBR system, the maintenance engineers can retrieve too information from previous cases which are most similar to new problem and they can solve new problem using solutions from the previous cases. In this paper, we propose a new method which is the case retrieval of CBR system using Petri net and we also applied it to diagnosis for electric motors as a practical problem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.332.1-332
• /
• 2002

The study was performed as reduction method using finite and boundary element analysis on structure-borne noise radiated by dash panel of a real car. The radiation efficiency is used to estimate sound noise of dash panel. Curvature and edges of dash panel have effect on radiation efficiency. The simulation results of dash panel was ensured by comparison between experimental results and simulation results of a simple rectangular plate. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.46-51
• /
• 1993

본 연구에서는 2회전자계(Two Revolving Field)이론과, 고정기준좌표계 (Stationary Reference Frame)이론을 이용하여 토오크 산출식을 유도하고 이 두 식을 비교하였다. 또한 고정자(Stator)의 전압과 전류를 측정한 결과에 고 정기준좌표계이론을 적용하여 토오크를 간접적으로 구하는 실험을 수행하여 변동토오크를 실험적으로 확인하도록 하였다. 또한 시뮬레이션(Simulation)을 통해 진동기 설계 매개변수들이 토오크의 변동성분에 미치는 영향을 파악하 고, 고정자 코일의 저항과 축전기의 영향은 실험을 통하여 확인하였으며, 더 불어 다구찌 방법을 이용하여 특정 목적 하에서 토오크의 변동성분을 줄이 는 전동기 설계 매개변수를 제시하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.321.2-321
• /
• 2002

An industrial robot noise has various noise sources such as gears, motors, bearings, and controller fans. Among these, gears are the most dominant source for noise. The gear noise, caused by tooth profile, elastic deformation, machining error and wear, is directly correlated with the transmission error of mating gear. Due to the fact that has several axis and many gears, it is difficult to understand the characteristics of the vibration and noise of robots. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.682-688
• /
• 2008

Transverse flux machine (TFM) has been considered as a promising driving machine especially at the low-speed applications because it has higher power density, torque and efficiency than the conventional electrical motors. However, it has complicated structure, large torque ripple and sometimes unbalanced magnetic force due to its inherent structure. This paper investigates the characteristics of torque ripple and unbalanced magnetic force of a rotatory two-phase TFM due to the teeth geometry by using the 3-dimensional finite element method, and it develops a rotatory two-phase TFM with herringbone teeth to reduce the torque ripple as well as to eliminate the unbalanced magnetic force.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.809-816
• /
• 2008

With increasing demands for reducing cost of maintenance which can detect machine fault automatically; low cost and intelligent functionality sensors are required. Rapid developments, in semiconductor, computing, and communication have led to a new generation of sensor called "smart" sensors with functionality and intelligence. The purpose of this research is comparison of machine fault classification between general analyzer signals and smart sensor signals. Three types of sensors are used in induction motors faults diagnosis, which are vibration, current and flux. Classification results are satisfied.

• Structural Engineering and Mechanics
• /
• v.9 no.2
• /
• pp.111-126
• /
• 2000

Truss type structures are attractive to a variety of engineering applications on earth as well as in space due to their high stiffness to mass ratios and ease of construction and fabrication. During the service life, an individual member of a truss structure may lose load carrying capacity due to many reasons, which may lead to collapse of the structure. An analytical and computational procedure has been developed to study the response of truss structures subject to member failure under static and dynamic loadings. Emphasis is given to the dynamic effects of member failure and the propagation of local damage to other parts of the structure. The methodology developed is based on nonlinear finite element analysis technique and considers elasto-plastic material nonlinearity, postbuckling of members, and large deformation geometric nonlinearity. The pseudo force approach is used to represent the member failure. Results obtained for a planar nine-bay indeterminate truss undergoing sequential member failure show that failure of one member can initiate failure of several members in the structure.