• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.547-552
• /
• 2000

This paper presents a developed squirrel cage induction motor for axial flow In. Nearly all of the induction motors for fan consists of two parts, rotor and stator, and the position of rotor is located inside of stator. This construction restricts the air flow rate, otherwise requires bending duct. But developed squirrel cage induction motor for axial flow fan exchanged the position each other. So, we can reduce the weight and size about 30%, and there are no bending duct to locate the fan motor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1308-1313
• /
• 2001

This paper presents methods of parameter measurement and starting characteristics of a 3 phase induction motor. The motor parameters measured by DC test, blocked rotor test, and no load test are used as the input data for computer simulation. Starting characteristics are analyzed through computer simulation using measured parameters, and the simulation results are compared with the experimental results obtained by using strain gauge attached on the motor shaft. It is conformed that the experimental results are very similar to those of the simulation.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.949-953
• /
• 2004

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid automotive applications that have strict EMC standards. It is compared SRM with BLDC and DC motor by experiments.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.855-857
• /
• 2004

유지 보수가 용이하고 제어 성능이 좋은 BLDC 모터가 최근 자동화 공정에서 많이 사용되고 있다. 이와 같은 자동화 환경에서 분산되어 있는 각종 장치들을 제어하고 감시하기 위해서는 네트워크 시스템이 필수적이다. 여러 대의 전동기가 연계하여 단일 작업을 수행하는 경우 네트워크 기반의 실시간 제어가 더욱 중요하다. 본 논문에서는 CAN 네트워크를 사용한 다중 BLDC모터의 속도제어 시스템을 구현하여 개별 노드로 구성된 각각의 모터가 같은 정속도 회전을 하도록 한다.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.279-282
• /
• 2004

This paper presents load torque observer that is used to deadbeat load torque observer in the induction motor position control system. The simulation has been obtained by simulink. A digital control is composed by trigger method in the continuous block diagram. The results show that proposed system has good effectiveness for the disturbance in induction servo motor system.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.298-302
• /
• 2004

In this paper, AC electric vehicle propulsion system(Converter/Inverter) using high power semiconductor, UM(Intelligent Power module) is proposed. 2-Parallel operation of two PWM converter is adopted for increasing capacity of system and the VVVF inverter control is used a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region. The proposed propulsion system is verified by experimental results with a 1,350kW converter and 1,100kVA inverter with four 210kW traction motors.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.940-943
• /
• 2004

This Paper analysis variable characteristics of inductance profiles and basic magnetic fields for Switched Reluctance Motors(SRM). The varying Inductance and flux linkage on operating control condition are very important for developing control algorithm and SRM accurate drive system. Therefore, we have analytical model for varying inductance and flux linkage with simulation and experimental method, and to find an analytical expression for the SRM coenergy. There are shown some good results that comparison of simulated and analytical inductance, flux linkage and current waves.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.342-344
• /
• 2008

24V DC power system of commercial vehicle includes 28V alternator and 24V battery bank (two 12V battery bank in series). BEQ(Battery Equalizer) provides efficient and reliable 12V DC power to 12V electrical load in 24V DC power system. In addition to providing 12V DC power, BEQ ensures that battery voltages remain equal which extends battery life. It is the most cost effective and efficient solution for dual voltage systems. BEQ made by Hyundai MOBIS is specifically designed to provide reliable 12V DC power for 12V ABS(Anti-lock Brake system).

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.456-463
• /
• 2009

The paper presents a method for controlling induction motors using a nonlinear internal model control (IMC) approach. The process model and the inverse model are developed in the rotor flux coordinate. The main advantage of the proposed method is that it easily specifies the performance (steady state error, transient response, etc.) and the robustness of the controller by means of the IMC filters. Simulation results illustrate the effectiveness of the proposed method. Results on a real time system show that the control system has good performance and robustness against changes in motor parameters (rotor and stator resistances, rotor and stator inductances, rotor inertia).

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1559-1566
• /
• 2015

The brushless DC motor (BLDCM) has many advantages. As a result, it is widely used in electric vehicle (EV) drive systems. To improve the reliability of the motor control system, a position sensorless control strategy based on a sliding mode observer (SMO) is proposed. The global fast terminal sliding mode observer (GFTSMO) is proposed to enhance the control performance of the SMO control system. The advantages of the linear sliding mode and the nonsingular terminal sliding mode (NTSM) are combined in the control strategy. The convergence speed of the system state is enhanced. The motor commutation point is obtained with the observation of the back EMF, and the instantaneous torque value of the motor is calculated. Therefore, the position sensorless control of the BLDCM is realized. Experimental results show that the proposed control strategy can improve the convergence speed, dynamic characteristics and robustness of the system.