• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.44-50
• /
• 2002

Theoretical analysis on the transient torsional vibration was started from early 1960's for high power synchronous motor application. As for marine engineering, simulation and measuring techniques of transient torsional vibration have been steadily studied by manufacturer of flexible coupling and designer of four stroke marine diesel engine. In this paper, the simulation method of transient torsional vibration for four stroke marine diesel engine application using Newmark method is introduced.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.182-186
• /
• 2007

This paper studied performance characteristics of hybrid automotive to replace existing fossil fuel vehicles. Specially, about power split type HEV that is T-HEV's drive system when a vehicle drives at steady speed, monitored both output of each engine, motor and generator and battery SOC (state of charge) and analyzed performance characteristic of power transmission system and electricity power parts. This study shows those that acquired and analyzed information from signals between HCU and each controller of actual T- vehicle. From this study, it is confirmed that each conditions of EV and HEV drive can be a improvement with respect to the fuel efficiency of vehicles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.626-631
• /
• 2013

Gas turbine systems are applied extensively in energy supplies to cover peak load requirements. The gas turboset must be accelerated by starting device up to 60%~80% of rated speed to ignite the gas turbine. Recently, the most favorable and economical starting device is the LCI(Load Commutated Inverter). The LCI runs up the gas turboset by feeding the generator as a synchronous motor. In this paper, we discuss in detail the driving principles and features of 183MW gas turbine system. During field application of LCI system, many tests have been conducted and the results were described in this paper. The test results will be considered as the important resources for development in future.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.684-687
• /
• 2010

본 논문은 복합사이클 발전플랜트의 폐열회수 보일러 최적운전 및 최적설계에 대한 새로운 접근 방법을 도출하기 위해 폐열회수 보일러에서 발생되는 증기로 증기터빈을 구동하는 하부사이클 효율을 검토하였다. 열역학 제1법칙 해석을 통해 하부사이클 에너지 평형을 검토하였고, 열역학 제2법칙을 통해 엑서지 평형을 검토하였다. 하부사이클 효율이 최대가 되는 폐열회수 보일러를 설계하기 위해서는 열역학 제1법칙을 해석할 경우 하부사이클 전체를 해석하여야 함을 알 수 있다. 하지만, 열역학 제2법칙을 통한 엑서지 해석을 행할 경우 하부사이클 효율이 최대가 되는 증발온도와 폐여회수 보일러에서 소모되는 엑서지가 최소가 되는 점이 일치함을 알 수 있었다. 따라서 본 논문을 통해 폐열회수 보일러에서 소모되는 엑서지 해석을 통해 하부사이클 효율이 최대가 되는 폐열회수 보일러 최적화가 가능함을 알 수 있다.

• Proceedings of the KOSOMBE Conference
• /
• v.1985 no.06
• /
• pp.1-4
• /
• 1985

본 논문에서는 모빌 로봇에 확장하기 위한 시도로서 대기조건에 따른 오차를 보상한 맹인 안내용 mobile Robot의 ultrasonic ranging system을 설계하였다. 본 system에서는 MCS-80 microcomputer를 이용하여 주위환경에 대한 다량의 정보를 실시간으로 처리하였고, 다각적인 정보획득을 위하여 stepping motor로서 sensor를 회전시켰으며, 대기조건에 따른 오차보상을 위하여 기준거리 비교방법을 사용하였고, offset과 근접장애물로 인한 오인식을 방지하기 위하여 받아들여진 data를 선정할 수 있도록 A/D converter를 사용하였다. 또한 맹인 아내를 위한 audio tone generator에 대하여 연구하였으며, 그밖에 외부 system과의 I/O interface 등 이 system에 대한 hardware와 software에 관하여 논하였다. 본 System에서 거리측정 오차는 약 1cm 정도이고 측정가능거리는 $0.2{\sim}6m$이다.

• The Korean Journal of Pharmacology
• /
• v.4 no.1 s.5
• /
• pp.37-39
• /
• 1968

A method for presenting the heart rate of intact animals as a kymographic record is described. A transistorized impulse generator with a dry battery power supply is used to produce pulses. The pulses are integrated and make a pen motor drived. The ability of the instrument to follow a wide range of heart rate change is demonstrated. The instrument is especially usefull to observe an acute and transitory heart rate change. A method for changing the heart beat to sound and a method for counting the heart rate of intact animal and isolated preparations by employing post office counter were also described.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.310-319
• /
• 1996

본 연구에서는 초전도의 전반적인 시장규모, 에너지 분야에서의 고온 초전도 연구 진척 내용, 마지막으로 저온 초전도체의 기술현황을 토대로 저온을 고온 초전도체로 대체 시 이에 따른 대체 효과를 비교 분석하고자 하였다. 하지만 고온 초전도체에 관한 기술적 문제가 아직 많은 문제로 제기되고 있어 정확한 기술적 판단에는 아직 상당히 미흡하다고 여겨진다. 또한 초전도를 이용한 에너지 응용범위가 너무 광범위하여 본고에서는 대표적 응용분야 몇 가지만 소개하고자 한다. 참고로 4K와 77K의 차이점을 평가할 때의 기준은 자기장과는 무관하게 임계전류밀도를 77K에서 $10-^5$$cm^2$으로 가정 실시한 것이다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.464-471
• /
• 1999

This paper describes a design of the helium-recondensing system utilizing cascade Roebuck refrigerators. Superconducting generator or motor has the superconducting field winding in its rotor that should be continuously cooled by cryogen. Since liquid helium transfer from the stationary system to the rotor is problematic, cumbersome, and inefficient, the novel concept of a rotating helium-recondensing system is contrived. The vaporized cold helium inside the rotor is isothermally compressed by centrifugal force and expanded sequentially in cascade refrigerators until the helium is recondensed at 4.2K. There is no helium coupling between the rotor and the stationary liquid helium storage. Thermodynamic analysis of the cascade refrigeration system is performed to determine the key design parameters. The loss mechanisms are also explained to identify entropy generation that degrades the performance of the system.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.81-91
• /
• 1997

In this study, a magnetic sensor to make use of eddy current was developed to detect the weld seam of butt joint in the sheet metal arc welding. This system consist of the sensor device for detecting the weld line, the servo control device for driving the weld torch movement and the control unit. A signal processing was applied to smooth the output signal of the sensor. The weld joint was determined by using a 1st order differential method. To improve tracking accuracy of the system, moving average method which has an effect of proportional and weighted integral control was applied to a series of the weld joint positions obtained above. The weld line for tracking was generated by using data regeneration algorithm. Based on these results, each servo motor was controlled by pulse generator. From experimental results, it was revealed that this system has excellent detecting ability for weld line and seam tracking ability.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.243-246
• /
• 2004

Currently, advanced countries invest lots of efforts to develop improvement of electric power production and supply, confronting environmental problems and new energy development. They set up long term plan focusing on electric power transmission infrastructure construction technology, establishment of the customer care service network using electric technologies, improvement of economic productivity by innovative electric technology, prevention of global warming gas and clean and efficient energy use etc. Comparing to those countries, the level of technologies that we have are in behind and moreover, technological resources are limited. Therefore, Korea is required to reconsider efficient distribution of R&D investment by concentrating on limited R&D resources to important technologies which could be stepping stone to gain competitive advantage. It can be done through comparative analysis of electric technologies among advanced countries and analysis of electric technology development policy.