• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.124-130
• /
• 2000

For measuring out the submicron order straightness, a precision measuring device is developed in this paper. The device is constructed with a hydrostatic feed table and a capacitive type sensor which is mounted to the feed table. Straightness is acquired as substracting the motion error of feed table from the measured profile with probe. Motion error of feed table is simultaneously compensated upto 0.120${\mu}{\textrm}{m}$ of linear motion error and 0.20arcsec of angular motion error using the active controlled capillary. Reversal method and strai호t-edge is used fur estimating the measuring accuracy and from the experimental result, it is verified that the device has the measuring accuracy 0.030m. Also, through the practical application on the measurement of ground surface, it is confirmed that the device is very effective to measure the submicron order straightness.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.1020-1026
• /
• 2016

Motion estimation (ME) algorithms supporting quarter-pixel accuracy have been recently introduced to retain detailed motion information for high quality of video in the state-of-the-art video compression standard of H.264/AVC. Conventional sub-pixel ME algorithms in the spatial domain are faced with a common problem of computational complexity because of embedded interpolation schemes. This paper proposes a low-complexity sub-pixel motion estimation algorithm in the transform domain utilizing shifting matrix. Simulations are performed to compare the performances of spatial-domain ME algorithms and transform-domain ME algorithms in terms of peak signal-to-noise ratio (PSNR) and the number of bits per frame. Simulation results confirm that the transform-domain approach not only improves the video quality and the compression efficiency, but also remarkably alleviates the computational complexity, compared to the spatial-domain approach.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.137-144
• /
• 2000

In order to achieve systematical method for improving motion accuracy of hydrostatic table, an algorithm using finite element method is proposed in this paper. Quantification of averaging effect of oil film on motion error is performed theoretically by analysis on the relationship between spacial frequency of rail form error and motion error of table. Influences of film stiffness and pocket size on the motion error of table are also analyzed theoretically. Validity of the algorithm is verified experimentally from the test on the motion error of table with three types of rail which have different form profile. Experimental results show that the algorithm is very effective to analyze theoretically the motion error of hydrostatic table.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.583-585
• /
• 2004

In this paper we will deal with a calibration method for low cost motion capture system using psd(position sensitive detection) optical sensor. To measure the incident direction of the light from LED emitted marker, the PSD is used the output current ratio on the electrode of PSD is proportional with the incident position of the light focused by lens. In order to defect the direction of the light, the current output is converted into digital voltage value by opamp circuits peak detector and AD converter with the digital value the incident position is measured. Unfortunately, due to the non-linearly problem of the circuit poor position accuracy is shown. To overcome such problems, we compensated the non-linearly by using least-square fitting method. After compensated the non-linearly in the circuit, the system showed more enhanced position accuracy.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.621-624
• /
• 1999

This paper describes a distance estimation method of object's motion in soccer image sequence by tracking field features. And we quantitatively evaluate the estimation accuracy We suppose that the input image sequence is taken with a camera on static axis and includes only zooming and panning transformation between frames. Adaptive template matching is adopted for non-rigid object tracking. For background compensation, feature templates selected from reference frame image are matched in following frames and the matched feature point pairs are used in computing Affine motion parameters. A perspective displacement field model is used for estimating the real distance between two position on Input Image. To quantitatively evaluate the accuracy of the estimation, we synthesized a 3 dimensional virtual stadium with graphic tools and experimented on the synthesized 2 dimensional image sequences. The experiment shows that the average of the error between the actual moving distance and the estimated distance is 1.84%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.107-118
• /
• 2015

Although most current video coding standards set a fixed motion vector resolution like quarter-pel accuracy, a scheme supporting multiple motion vector resolutions can improve the coding efficiency of video since it can allow to use just required motion vector accuracy depending on the video content and at the same time to generate more accurate motion predictor. However, the selected motion vector resolution for each motion vector is a signaling overhead. This paper proposes a contradiction testing-based signaling scheme of the motion vector resolution. The proposed method selects a best resolution for each motion vector among multiple candidates in such a way to produce the minimum amount of coded bits for the motion vector. The signaling overhead is reduced by contradiction testing that operates under a predefined criterion at both encoder and decoder with a purpose of pruning irrelevant candidate motion vector resolutions from signaling responsibility. Experimental results verified that the proposed scheme is effective in reducing coded motion information by achieving its $Bj{\o}ntegaard$ delta bit rate (BDBR) gain of about 4.01% on average (and up to 15.17%) compared to the conventional scheme with a fixed motion vector resolution.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.65-70
• /
• 2002

The rotational performance off machine tool spindle has a direct influence upon the surface finish of the finished workpiece. This running accuracy of the spindle is improved by increasing preload on the bearings, while it results in higher temperature rise and larger thermal deformation. Therefore, finding the optimal preload condition for high speed spindle is very important factors in spindle motion. in spindle motion. In this study, the effect of the preload on the roundness accuracy has been examined at the different cutting conditions. Experiments were carried out to investigate the effects of the bearing preload on the running accuracy of high speed spindle which was supported by two angular contact bearings.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.52-54
• /
• 2021

In this paper we propose a method predict whether a video frame contains motion according to the invoking situation of the coding unit mode in HEVC. The motion prediction of video frames is conducive for use in video compression and video data extraction. In the existing technology, motion prediction is usually performed by high complexity computer vision technology. However, we proposed to analyze the motion frame based on HEVC coding unit mode which does not need to use the static background frame. And the prediction accuracy rate of motion frame analysis by our method has exceeded 80%.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.62-68
• /
• 2004

Effectiveness of a corrective machining algorithm, which can construct the proper machining information to improve motion errors utilizing measured motion errors, is verified experimentally in this paper, Corrective machining process is practically applied to single and double side hydrostatic bearing tables. Lapping process is applied as a machining method. The machining information is obtained from the measured motion errors by applying the algorithm, without any information on the rail profile. In the case of the single-side table, after 3 times of corrective remachining, linear and angular motion errors are improved up to 0.13 $\mu\textrm{m}$ and 1.40 arcsec from initial error of 1.04 $\mu\textrm{m}$ and 22.71 arcsec, respectively. In the case of the double-side table, linear and angular motion error are improved up to 0.07 /$\mu\textrm{m}$ and 1.42 arcsec from the initial error of 0.32 $\mu\textrm{m}$ and 4.14 arcsec. The practical machining process is performed by an unskilled person after he received a preliminary training in machining. Experimental results show that the corrective machining algorithm is very effective and easy to use to improve the accuracy of hydrostatic tables.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.126-137
• /
• 1993

This paper presents an efficient method for the identification of motion error sources in NC machine tools by making use of the circular interpolation test, which is often used in estimating the motion accuracy of NC machine tools. Mathematical formulae are described for motion errors due to various kinds of error sources. Two identification formulae are proposed: one is based on the frequency analysis and the other is formulated with the weithted residual method. Motion error signal is classified into two patterns, mean errors(mean of CW and CCW test signals from mean errors). The sources of the mean errors are identified by using the frequency analysis technique and the sources of the deviation errors by the weighted residual formulaltion. A menu driven, user oriented, computer program is written to realize the full steps of the proposed identificationprocedure. Then, the identification method is applied to two NC machine tools.