• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.332-337
• /
• 2000

Forming mechanism of fibrous TiC during self-propagating high temperature synthetic reaction was analyzed and suggested. It was revealed that critical temperature for the stable fiber formation was not the melting point of TiC, but the eutectic reaction temperature of TiC and C. Minimum amount of TiC diluent addition required to form fibers was calculated to be 25.6%, which was consistent with the experimental result. Synthesized fibers were found hollow tube-like. The morphology was explained by the diffusion rates of C and Ti in TiC, and by the molar volume chnage of C during the reaction. Expanding shell model was suggested for the hollow fiber formation mechanism.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.42.1-42.1
• /
• 2020

Filamentary structures pervade the whole kind of molecular clouds from low- to high-mass star-forming clouds, and the non-star-forming clouds. It is supposed to be a prerequisite stage of star formation, and hence how filaments and dense cores form is one of the critical questions in the early star formation study. We investigated the dynamics and chemistry of dense cores in IC5146 using TRAO FUNS (TRAO Survey of the nearby Filamentary molecular clouds, the Universal Nursery of Stars) data. In addition, we performed polarization observation using JCMT Pol-2 polarimetry to investigate the magnetic field morphology within a core-scale. In the presentation, we will present the result of TRAO FUNS and JCMT/Pol2 observation toward the filaments and dense cores in the IC5146. We aim to reveal the roles of gravity, turbulence, and magnetic field in the formation of dense cores in the western hub-filament structure of IC5146.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.314-320
• /
• 2024

Lithium dendrite formation is one of the most significant problems with lithium metal batteries. The lithium dendrite reduces the lithium metal batteries' cycling life and safety. To apply consistent external pressure to a lithium metal pouch cell, we design a press jig in this study. External pressure creates dense lithium morphology by preventing lithium dendrite formation. After 300 cycles at 1 C, the cells with the external pressure perform far better than the cells without it, with a cycling retention of 97.8%. The formation of stable lithium metal is made possible by external pressure, which also enhances safety and cyclability.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.84.1-84
• /
• 2003

Magnaporthe grisea, the casual agent of rice blast, forms an appressorium to penetrate its host. Much has been learned about environmental cues and signal transduction pathways, especially those involving CAMP and MAP kinases, on appressorium formation during the last decade. More recently, pharmacological data suggest that calcium/calmodulin-dependent signaling system is involved in its appressorium formation. To determine the role of phosphoinositide-specific phospholipase C (PI-PLC) on appressorium formation, a gene (WPLCl) encoding PI-PLC was cloned and characterized from M. grisea strain 70-15. Sequence analysis showed that MPLCl has alt five conserved domains present in other phospholipase C genes from several filamentous fungi and mammals. Null mutants (mplcl) generated by targeted gene disruption exhibited pleiotropic effects on conidial morphology, appressorium formation, fertility and pathogenicity. mplcl mutants developed nonfunctional appressoria and are also defective in infectious growth in host tissues. Defects in appressorium formation and pathogenicity in mplcl mutants were complemented by a mouse PLCdelta-1 cDNA under the control of the MPLCl promoter. These results suggest that cellular signaling mediated by MPLCl plays crucial and diverse roles in development and pathogenicity of M. grisea, and functional conservation between fungal and mammalian Pl-PLCs.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.49-49
• /
• 2014

Blue Compact Dwarf galaxies (BCDs) are low-mass galaxies with recently enhanced star formation activity. Since the discovery of old stellar population in the BCDs, a number of hypotheses have been suggested as the origin of the current active star formation. One theory is tidal interactions such as fly-by and merger. In this study we test this hypothesis using a pair of BCDs, ESO 435-IG20 and ESO 435-IG16 that are separate by only ~80 kpc in projection at a similar redshift (at a ~9 Mpc distance). In the HIPASS survey, intergalactic atomic hydrogen envelope has been found to be covering both galaxies, making the pair a good candidate for the case where the star formation has been triggered by tidal interaction. We probe the gas morphology and kinematics of the BCD pair using ATCA HI data in order to find the evidence of tidal interaction. We also estimate star formation rates in the pair based on Ha emission and UV continuum, and compare with other dwarf galaxies to investigate how responsible the tidal interaction is for the enhanced star formation in this case.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.418-437
• /
• 1995

The effect of the hydroxyapatite coatings on Titanium implants has been the subject of recent investigations. So far, the use of HA coating remains substantially controversial.This study was aimed to evaluate histologically the bone healing patterns around titanium plasm sprayed(TPS) amd HA-coated implant after implantation into the femur neck of ten adult dogs. After implantation, animals were sacrificed at the intervals of 2,4,6,8 and 12 weeks.The fluorescent dyes were injected on the postoperative 4th and 12th week into the animals supposed to be killed at the 12th week. The morphology and direction of new bone formation was similar in both TPS and HA-coated implants.There was a tendency toward more bone formation in the cortical bone area than in the cancellous bone area. Histologically,in the interface of the HA-coated implants, bone response and bone maturation was faster, compared to the TPS implants in the 2nd and 4th week. By fluorescent microscopy, new bone formation was active in the 4th week around both implants and was directed from the periosteum overlying cortical bone to the cancellous bone. These results suggest that the bone formation and maturation is faster during the early healing stage in the interface of the HA-coated implant and where the cortical bone quality is poor, HA coated implant is superior to the TPS implant in the early phase of new bone formation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.79-83
• /
• 2001

In order to compare the barrier properties of Ta-N/Si(001) with those of Ta-N/Ta/Si(001), we studied structural properties of films grown by RF magnetron sputtering with various $Ar/N_2$ ratios. To evaluate the barrier properties, the samples were annealed in a vacuum chamber. Ex-situ x-ray scattering measurements were done using an in-house x-ray system. With increasing nitrogen ratio in Ta-N/Si(001), the barrier property of Ta-N/Si(001) was enhanced, finally failed at $750^{\circ}C$ due to the crystallization and silicide formation. Compared with Ta-N/Si(001), Ta-N/Ta/Si(001) forms silicides at $650^{\circ}C$. However it does not crystallize even at $750^{\circ}C$. With increasing nitrogen composition in Ta-N/Ta/Si(001), the formation of tantalum silicide was reduced and the surface roughness was improved. To observe the surface morphology of Ta-N/Ta/Si(001) during annealing, we performed an in-situ x-ray scattering experiment using synchrotron radiation of the 5C2 at Pohang Light Source(PLS). Addition of Ta layer between Ta-N and Si(001) improved the surface morphology and reduced the surface degradation at high temperatures. In addition, increasing $N_2/Ar$ flow ratio reduced the formation of tantalum silicide and enhanced the barrier properties.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2001

Surfaces of PTFE and PVDF were modified by ion-assisted reaction (IAR) in which 1 keV $Ar^{+}$ ions were irradiated on the surface of the polymer with varying ion dose in an oxygen gas environment, and Cu, Pt, Al and Ag thin films were deposited on the modified polymers. Wettability of the modified polymers was largely improved by the formation of hydrophilic groups due to chemical reaction between polymer surface and the oxygen gas during IAR. The change in wettability in the modified polymers was also related to the change in surface morphology and roughness. Adhesion between metal films and polymers modified by IAR was significantly improved, so that no detachment was possible in the $Scotch^{TM}$ tape test. The increase of adhesion strength between the metal film and the modified PVDF was mainly attributed to the formation of hydrophilic groups, which interacted with the metal film. In the case of the modified PTFE, the enhanced adhesion to metal film could be explained by the change in surface morphology together with the formation of hydrophilic groups. The electrical properties of the metal films on the modified polymers were also investigated.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.196-197
• /
• 2005

Cathodic protection is one of the successful ways to prevent corrosion of steel structures in marine environments. The unique feature of cathodic protection in seawater is the formation of calcareous deposits on cathodic metal surface. The formation principles of calcareous deposit seawater had been known for a long time. That is, cathodic reduction reactions associated with cathodic protection in seawater generate $OH^-$ at the metal surface in accordance with the formular ; 1/2 $O_2$ + $H_2O$ + $2e^-$ $2OH^-$ and $2H_2O$ + $2e^-$ ${\rightarrow}$ $H_2$ + $2OH^-$. These reactions increase the pH at the metal / seawater interface. The high pH causes precipitation of $Mg(OH)_2$ and $CaCO_3$ in accordance with the formular ; $Mg^{2+}$ + $2(OH)^-$ ${\rightarrow}$ $Mg(OH)_2$ and $Ca^{2+}$ + $HCO_3^-$ + $OH^-$ ${\rightarrow}$ $H_2O$ + $CaCO_3$. These are typically the main compounds in calcareous deposits. It obviously has several advantages compared to the conventional coatings, since the environment-friendly calcareous deposit coating is formed by the elements($Mg^{2+}$, $Ca^{2+}$) naturally present in seawater. In this study, environmental friendly calcareous deposit films were prepared on steel plates by electro plating technic in natural seawater. The influence of current density on composition ratio, structure and morphology of the coated films were investigated by scanning electron microscopy formation process of calcareous deposits films in natural seawater. And we confirmed the properties of all the films can be improved greatly by controlling the material structure and morphology with effective use of the electroplating method in natural seawater.

• Journal of the Korean Chemical Society
• /
• v.58 no.5
• /
• pp.456-462
• /
• 2014

Binary-doped conducting chiral polyaniline (PAni) was synthesized by electrochemical polymerization of aniline at low-temperature ($0^{\circ}C$) and room-temperature (RT) conditions. (+)-Camphorsulfonic acid (CSA) and hydrochloric acid (HCl) were used as a binary dopant. Formation of the binary-doped PAni rather than a mixture of the corresponding single-doped PAni was confirmed by cyclic voltammogram, FT-IR and circular dichroism spectra. The temperature influenced the electrochemical behavior and doping level, thus determining the crystallinity and morphology of the PAni. However, among other results, morphology of the PAni is found to be most strongly depends on the polymerization temperature. With increased temperature from the initial state to RT, morphology of the PAni changed from fibrous to short-fibrous structure. The sheet resistance of the PAni films on an ITO was measured by using four-point probe dc method.