• 복식
• /
• 제62권6호
• /
• pp.38-52
• /
• 2012

The purpose of this study is to confirm the international unique color sensibility according to the ethnic color preferences. The existing studies about color sensibility were investigated to analyze the international color sensibility. The countries were chosen according to its, strong regional and racial color. Also, the documents and websites about environment color such as structure color, natural feature color, traditional folk costume color and customary color names were investigated, and then, the international color sensibility was analyzed by using the color image scale. As a result of the analysis about the differences of color sensibility, internationally distinguished color sensibility was discovered. There were differences not only for the preference trend of hue but also for the tone or contrast of color among the selected countries. Especially, Great Britain had a strong preference for G categories that they preferred the warm-grayish color image. Russia has a preference for R, G, and B categories with the preference for the warm-clear image. Netherlands had a preference for R, Y, and PB categories and it preferred the cool-hard-grayish, warm-soft-clear image. Italy had a preference for R and Y categories and it preferred the warm-clear image. Morocco had a preference for R and B categories and it preferred the warm and cool, clear image. Japan had a preference for R, G categories and it preferred the warm-grayish image. Korea had a preference for R and B categories and it preferred the warm-soft-clear, and cool-clear image. With these results, the researcher concludes that the integrated analysis of the environment color and the traditional racial color factors are very persuasive methods to comprehend the international color sensibility.

• 한국건설관리학회논문집
• /
• 제16권3호
• /
• pp.78-90
• /
• 2015

최근 건설 내수시장의 물량 감소에 따라 해외 건설 시장 진출을 가속화 하고 있다. 하지만 해외 시장의 경쟁력 심화에 따른 저가 수주 및 시장 정보 부족에 따른 수주 및 수행 실패 사례가 많이 나타나고 있다. 이에 따라 본 연구에서는 해외건설의 신규 시장에서 프로젝트를 수행하기 위한 필수 조사항목을 정의하고 일정한 기준에 따른 분류를 하여 표준 프레임웍을 개발하였다. 개발된 프레임웍을 실제 모로코 건축 프로젝트에 적용하였고 그 결과 제한적이긴 하지만 타당성을 검증하였다. 향후 좀 더 다양한 프로젝트에 적용하여 항목에 대한 검증 및 표준화가 필요할 것이지만 그간 체계적이지 못하게 나열되었던 항목들을 표준적인 프레임웍으로 정리하고 실무적으로 이를 사업초기의 사업환경 조사수단으로 활용가능하다는 점에서 의의가 있다고 하겠다.

• 한국수산과학회지
• /
• 제44권6호
• /
• pp.635-643
• /
• 2011

Agar was prepared from Gelidium amansii collected from Jeju Island, South Korea. This agar preparation has high gel strength and low sulfate content compared with G. amansii agar from Morocco. Accordingly, agarose was made from the Jeju agar through the consecutive refining processes of dimethyl sulfoxide (DMSO) extraction and ethylene diamine tetra acetic acid (EDTA) washing. The physicochemical properties of the resulting agarose were compared with those from agarose prepared using only DMSO extraction. Consecutive DMSO extraction and EDTA washing more strongly affected the physicochemical properties of the agarose (purified agarose) compared with the use of DMSO extraction alone. These properties were similar to those of commercial agarose used for electrophoresis. In DNA electrophoresis, the separation and movement speed of the purified agarose were similar to those of the commercial agarose. In a $^{13}C$ NMR analysis, the purified agarose exhibited the same carbon peak as the commercial agarose. When observed under scanning electron microscopy, the agar had an even and smooth surface without irregularities or pores, and the purified agarose had a wide surface area with a large number of pores; the commercial agarose had an irregular surface that would allow the solvent to easily permeate. These results illustrate that the physicochemical properties of agarose prepared from DMSO extraction and EDTA washing were more effective than those observed after DMSO extraction alone; thus, these processes used in succession will be useful in agarose industries.

• 전자공학회논문지SC
• /
• 제40권5호
• /
• pp.333-340
• /
• 2003

도플러 처리(Doppler processing) 기능은 잔류(residue) 클러터(clutter)의 제거뿐만 아니라 위상정합누적(coherent integration)을 수행하므로, 펄스 도플러 레이더에 있어서 가장 핵심적인 역할을 수행한다. 디지털 신호처리기(DSP : digital signal processor)의 성능향상과 더불어 DSP를 이용한 구현이 점점 일반화 되어가고 있다. 도플러 처리기가 입력신호를 실시간으로 처리하기 위해서는, 다중 DSP를 이용한 병렬처리 개념이 일반적으로 사용되어야 한다. 본 논문에서는 아날로그 디바이스사의 ADSP21060 8개를 탑재한 Morocco-2 보드를 사용하여 MTI(moving target indicator)필터, 도플러 필터뱅크(DFB : Doppler filter bank) 및 제곱검출기(square-law detector) 등으로 구성된 프로그램 가능한 구조의 도플러 처리기를 구성하였다. 위상정합처리구간(CPI : coherent processing interval) 동안 수신된 입력데이터의 분배(distribution)시간, 출력데이터의 전송(transfer)시간 및 알고리즘 수행에 소요되는 연산시간 등을 수식으로 표현하여, 전체 처리시간과 도플러 처리기 구현에 소요되는 DSP의 수를 예측하였다. 또한 레이더 운용에 필요한 각종 타이밍신호 및 모의 표적신호를 발생할 수 있는 TSG(timing signal generator)를 이용하여 도플러 처리기의 실시간 연산기능을 확인하였다.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.277-286
• /
• 2019

In 2014, the first demineralization plant, using nanofiltration (NF) membrane coupled with renewable energies was realized at Al Annouar high school of Sidi Taibi, Kenitra, Morocco. This project has revealed difficulties related to the membrane performances loss (pressure increase, flux decline, poor water quality of the produced water and increase of energy consumption), as consequences of membrane fouling. To solve this problem, an autopsy of the membrane was done in order to determine the nature and origin of the fouling. The samples of membrane and fouling were then analyzed by scanning electron microscopy using a scanning electron microscope (SEM) connected with an energy dispersive X-ray (EDX) detection system and X-ray diffractometer (XRD). Moreover, three cleaning solutions (hydrochloric acid, nitric acid and sulfuric acid) were tested and assessed in a single cleaning step to find the suitable one for the fouled membrane to regain its initial permeability and performances. The analysis of the experimental results showed that the fouling layer is mainly composed of calcium carbonate (inorganic fouling). Results showed also that the permeability is improved by the hydrochloric acid cleaning (pH=3) with a cleaning efficiency of 93%. Cleaning efficiency did not exceed 75 % with nitric acid (pH=3) and 40 % with sulfuric acid (pH=3).

• 한국미생물·생명공학회지
• /
• 제49권4호
• /
• pp.501-509
• /
• 2021

The increasing demand for baked products has given a boost to research on isolation and selection of novel yeast strains with improved leavening activity. Twelve sourdough samples were collected from several localities of the Fez region in Morocco. The pH and total titratable acidity (TTA) values of these samples varied from 3.03-4.63 and 14-17.5 ml of 0.1 N NaOH/10 g of sourdough, respectively, while yeast counts ranged from 5.3 6.77 Log CFU/g. Thirty-two yeast isolates were obtained and evaluated for their leavening ability. Out of all isolates, four yeasts molecularly identified as Saccharomyces cerevisiae (three strains) and Kluyveromyces marxianus (one strain) showed highest specific volumes of 4.69, 4.55, 4.35 and 4.1 cm³/g, respectively. These strains were further assessed for their tolerance to high concentrations of salt, sugar, elevated temperatures, and low pH conditions. K. marxianus showed higher resistance than the S. cerevisiae. Thus, Moroccan sourdoughs harbor technologically relevant yeasts that could be used as potential starters for bread preparation.

• 자원환경지질
• /
• 제54권6호
• /
• pp.629-647
• /
• 2021

Located in the eastern part of the Anti-Atlas, the Tafilalet region shows numerous dykes and sills that crosscut the Paleozoic terrains. The magmatic structures (dykes and sills) of the Tadaout-Tizi n'Rsas (TTR) anticline is studied here, it located neighboring the main branch of the Anti-Atlas Major Fault (AAMF), known in this location as the Oumejrane-Taouz Fault (OJTF). The N20° to N60° trending dykes crosscut the Paleozoic formations (Ordovician to Devonian), whereas sills are injected into the Silurian and Devonian ones. The dyke swarms of TTR have been studied using the Anisotropy of Magnetic Susceptibility (AMS), petrographic study and structural analyses. The petrographic study of the TTR doleritic dykes shows a dominance of plagioclase feldspars, alkali feldspars, amphiboles, pyroxenes and biotite. The dykes contain also mesotype (natrolite), sphene (titanite), apatite, actinolite and pegmatitic enclaves of biotite, orthoclase feldspars and pelites. Concerning field works, they show the deformation of TTR dykes by the Variscan tectonics events, it is marked by the presence of displacements (strike-slip faults) and cleavages. The Magnetic Susceptibility (MS) measured on magmatic specimens show the dominance of ferromagnetic and paramagnetic minerals. The high values of MS in the dykes are due to the presence of hematite, amphibole, pyroxene and biotite. In addition their magnetic fabric, determined by our AMS study, allows us to reconstitute the tectonic event which affected the magmatic bodies. This one is characterized by a magnetic foliation and a NNW-trending lineation that reflect the Variscan shortening orientation.

• The Plant Pathology Journal
• /
• 제38권1호
• /
• pp.1-11
• /
• 2022

Fusarium culmorum is one of the most important causal agents of root rot of wheat. In this study, 10 F. culmorum isolates were collected from farms located in five agro-ecological regions of Morocco. These were used to challenge 20 durum wheat genotypes via artificial inoculation of plant roots under controlled conditions. The isolate virulence was determined by three traits (roots browning index, stem browning index, and severity of root rot). An alpha-lattice design with three replicates was used, and the resulting ANOVA revealed a significant (P < 0.01) effect of isolate (I), genotype (G), and G × I interaction. A total of four response types were observed (R, MR, MS, and S) revealing that different genes in both the pathogen and the host were activated in 53% of interactions. Most genotypes were susceptible to eight or more isolates, while the Moroccan cultivar Marouan was reported resistant to three isolates and moderately resistant to three others. Similarly, the Australian breeding line SSD1479-117 was reported resistant to two isolates and moderately resistant to four others. The ICARDA elites Icaverve, Berghisyr, Berghisyr2, Amina, and Icaverve2 were identified as moderately resistant. Principal component analysis based on the genotypes responses defined two major clusters and two sub-clusters for the 10 F. culmorum isolates. Isolate Fc9 collected in Khemis Zemamra was the most virulent while isolate Fc3 collected in Haj-Kaddour was the least virulent. This work provides initial results for the discovery of differential reactions between the durum lines and isolates and the identification of novel sources of resistance.

• Journal of Plant Biotechnology
• /
• 제50권
• /
• pp.115-126
• /
• 2023

A hydroponics experiment was performed to study the physiological and biochemical changes in Moroccan barley (Hordeum vulgare L.) varieties cultivated under salt stress conditions. Four barley varieties were grown under exposure to three salt concentrations, including 0, 200, and 300 mM NaCl. The ANOVA for both salt stress-sensitive and resistant varieties indicated that salt treatment represented the main source of variability in all studied traits. Salt treatment significantly reduced root and shoot dry weight (RDW and SDW), relative water content (RWC), and chlorophyll content (Chl a, Chl b, and Chl T). However, increases in electrolyte leakage (EL) along with proline and total soluble sugar (TSS) contents were recorded. In addition, large variations in all measured traits were found between varieties. The 'Massine' and 'Laanaceur' varieties displayed relatively higher RDW and SDW values. The 'Amira' and 'Adrar' varieties showed lower RWC values and Chl contents than those of the controls indicating their relative sensitivity to salt stress. Principal component analysis revealed that most of the variation was captured by PC1 (72% of the total variance) which grouped samples into three categories according to salt treatment. Correlation analyses highlighted significant associations between most parameters. Positive relationships were found between RDW, SDW, RWC, Chl content, and soluble proteins contents, while all of these parameters were negatively associated with EL intensity, proline content, and TSS content. The results from this study showed that the 'Massine' and 'Laanaceur' varieties were relatively salt-tolerant. These two salt-tolerant varieties present a good genetic background for breeding of barley varieties showing high salt tolerance.