• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.183-191
• /
• 2000

The dyeing of silk fabric with chinese scholar tree extract was investigated. The colorant was extracted with distilled water, and concentrated under reduced pressure, and, finally spray-dried. The optimum temperature and dyeing time for the dyeing of silk with the scholar tree extract was $60^\circ{C}$ and 60 minutes respectively. In mordant dyeing, pre-mordanting method was most effective for color yield, and 1~2 % of mordant concentration was acceptable. Fastness of the dyed silk fabric to laundering and rubbing was shown to be good, but fastness to light, dry cleaning, and perspiration were varied with used mordants.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.3
• /
• pp.7-14
• /
• 2003

Fabrics dyed with artemisia extract have quite natural and elegant tones of color. This study purposed to find the best one for dyeing among artemisia collected in the four seasons in order to develop a more efficient method of dyeing with artemisia. As for the method of research, the researcher dyed wool fabric and silk fabric with artemisia, and measured dyeability according to the number of repeats of dyeing, coloration by post-mordant, color fastness to washing, color fastness to dry cleaning and color fastness to light. The results are as follows. 1. In dyeing with artemisia, dyeability was improved as the number of repeat of dying increased, and it was higher in wool fabric than in silk fabric. 2. Among artemisia collected in the four seasons, autumn artemisia had dyeability much inferior to that of artemisia from the other seasons, and winter artemisia had the best dyeability. 3. According to the result of treating fabric with post-mordant, the dyeability was improved significantly, and coloration was most remarkable when copper and iron mordant were used. 4. The color fastness to washing and color fastness to dry cleaning of fabric mordanted with artemisia were as high as grade 4-5 and grade 5 respectively. The color fastness to light was highest in winter artemisia as grade 4.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.2
• /
• pp.40-46
• /
• 2009

The purpose of this study was to estimate natural dyeing properties of Korean traditional paper (Hanji). We dyed the Korean traditional paper with dyestuff which extracted from wood meal of Cotinus coggygria Scop (smoke tree) using hot-water, ethanol and $K_{2}CO_{3}$ solution. As mordants, 0.5% of $AlK(SO_4)_2$, $FeCl_2$, and $CuCH_3(COO)_2$ solution were used respectively. The color of dyed Hanji mainly depended on not the methods of extraction but the kinds of mordant. The dyed Hanji mordant with $AlK(SO_4)_2$ colored vivid yellow, $FeCl_2$ colored dark olive, and $CuCH_3(COO)_2$ colored brown and/or orange. The dyed Hanji with hot-water extractive had the highest K/S value and ethanol and $K_{2}CO_{3}$ solution extractives were followed. The K/S value of dyed Hanji mordant with $AlK(SO_4)_2$ was higher than that of $FeCl_2$ and $CuCH_3(COO)_2$. The dyeing effectiveness of after-mordanting method was superior to the others but sim-mordanting method was the worst.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.1-9
• /
• 2006

The purpose of this study is to investigate the dyeability, antibacterial activity on silk and rayon fabrics dyed with cochineal. The result are as follows; 1. The K/S value of silk fabric was higher than that of rayon fabric. 2. The optimum conditions are mordant concentration $0.5{\sim}1%$, dyeing material concentration 2.0%(o.w.f), dyeing temperature $60^{\circ}C$, PH 3 and dyeing time 30minutes. 3. Pre-mordanting method had higher dyeing absorption than post mordanting method in case of silk and rayon fabrics. 4. The antibacterial activity of dyed silk fabrics were higher than that of dyed rayon fabrics and the antibacterial activity was increased by mordanting. 5. The lightfastness and perspiration fastness of silk fabric were improved but these of rayon were not. Dyeing fastness was improved by Fe mordanting on both fabrics.

• Journal of the Korean Home Economics Association
• /
• v.38 no.3
• /
• pp.1-9
• /
• 2000

Saururus-chinensis was used for the natural due stuff extraction and concentration to produce the condensed dye liquid. Using this liquid, the silk and the cotton fabrics were dyed. And then the K/S value, color difference were measured in order to determine the dye ability and the antimicrobial activity. The K/S values of silk were much higher than those of cotton. In terms of the silk fabric, the Al, Cr-premordanting and Fe, Cu-simmordanting method was most efficient of the mordanting method. The various suface colors on the dyed fabric were resulted according to used mordants and mordanting methods. The dye fastness was significantly improved when mordants were added. Among them, Al-mordant improved more than 1 level. The Cu, Fe-mordants showed the greatest antimicrobial activity on both of mordant treat silk and cotton.

• Fashion & Textile Research Journal
• /
• v.3 no.2
• /
• pp.162-167
• /
• 2001

The dyeing powder drawn out from Cinnamoum cassia by water was concentrated. Using this powder, the silk fabrics were dyed and they measured with the K/S value, surface color, dye fastness and antimicrobial properties. The colorant of Cinnamoum cassia was proved flavonoids by FT-IR spectrum. The K/S values of silk by mordants concentration were much higher than those of high-concentration, the color yield of the silk fabrics were most efficient the premordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark except AI-mordant. The chroma produced clear for the unmordanting, the color difference was distinct when using the Fe-mordant. The color fastness was significantly improved when mordants were added. In the case of the light fastness, Cu-mordants improved more than 1-2 level. The Cu-mordant showed the greatest antimicrobial activity on the silk fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.263-269
• /
• 2002

This research was conducted to establish the efficient use of the colored rice bran fur dyeing textiles. To investigate the fabric dyeability of the colored rice bran extract, the anthocyanin pigments were extracted with water of different temperature ranges of 40 ~ 8$0^{\circ}C$ and were dyed on silk fabrics with different dyeing temperature $25^{\circ}C$~6$0^{\circ}C$, at acidic pH and neutral pH, respectively. Aluminum chloride was preheated with mordant K/S value and dyeing fastness of dyed silk fabrics were examined. The anthocyanins of the colored rice bran were stable and red color at acidic pH, red purple or purple blue at neutral pH, but unstable, blue color at alkaline pH. If extracting temperature and dyeing temperature of dyeing solution were higher, the dyeability was high, but the color of dyed fabric showed red tone. When extracting temperature was 8$0^{\circ}C$ and dyeing temperature of dyeing solution was 6$0^{\circ}C$, the dyeability was best. Without mordant, the dyeability of silk fabrics was higher in acidic pH than in neutral pH solution. With mordant, the dyeability was higher than without mordant, and also higher in acidic pH. Pretreatment of aluminum chloride resulted in the increase of color intensity and stability. The laundering fastness of dyed fabrics was good from grade 5 to grade 3-4. Because of the anthocyanins sensitivity on light radiation, the light fastness of dyed fabrics was poor from grade 3 to grade 1-2.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.438-444
• /
• 2011

Bamboo leaves, as natural dye provide unartificial fresh green, are known for expert property at anti-bacterial, anti-aging, anti-oxidation, skin whitening, moisturizing, peeling of horny, deodorizing and some skin disease like as eczema and inflammation without any allergic response. Also, It is quite common to obtain bamboo leaves from our surrounding but most of them were not in use. On purpose of development the way of recycle with common material to dye, bamboo leaves were used to dye on ramie fiber which is valuable for both of apparel and industrial field and investigated their dyeing property. Using extract from bamboo leaves, dyeing property was examined with dyeability, colorimetric property, light fastness and wash fastness under different conditions by extract density, dyeing time, dyeing method and mordants. As results, dyeing was generally colored in yellowish, K/S Value was shown more higher on hemp fiber than ramie. The most optimum dyeing condition was investigated on pre-mordant treatment, dyeing temperature $60^{\circ}C$, dyeing time 30min and extract density 400%. On the treatment with mordant(Al, Fe, Cu), dyebility on both of hemp and ramie fiber were increased by mordant. Especially with Copper(Cu) as mordant, dyebility was highly increased than any other mordants and dyeings showed in deep color. Also on the fastness test which is the most important to natural dyeing, wash-fastness showed good performance with 4-5 grade but light-fastness was above 4 grade on both of hemp and ramie fiber, lower than wash-fastness overall.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.103-111
• /
• 2021

The purpose of this study is to investigate the antibacterial efficacy of cotton and silk/rayon fabrics dyed with Saururus chinensis extract against antibiotic-resistant strains. The concentration of the concentrated dye in the Saururus chinensis extracts was 1.1% (o.w.f), and the liquor ratio was 1:10 at 30-70℃. The mordanting method was a post mordanting method. The concentration of Al2(SO4)3, CuSO4 5H2O and FeSO4 and7H2O mordant was 5% (o.w.f), and the liquor ratio was 1:40. In order to assess the antimicrobial activity of naturally dyed fabrics, Methicillin-resistant Staphylococcus aureus (MRSA) ATCC 33591, was used by incubating it in Brain Heart Infusion Agar (BHA) including Oxacillin (2㎍/ml) and Fungizone (2.5㎍/ml) and Brain Heart Infusion broth (BHI; Detroit, MI, USA.) The investigation of the reduction of the rate of antibiotic-resistant strains to dyed cotton fabrics and silk/rayon fabrics revealed that Cu mordanting fabric has the highest antimicrobial effects, with the rate of 99.7%, and Fe mordanting fabric has the lowest, with 77.7%. Non-mordant cotton fabrics also show a high reduction rate of strains (94.6%). In the case of dyed silk/rayon fabrics, it indicates a high reduction in the rate of strains in all fabrics with non-mordant treatment (94.2%), Al mordanting (99.6%), and Cu and Fe mordanting(99.9%).