• Applied Biological Chemistry
• /
• v.45 no.4
• /
• pp.212-217
• /
• 2002

We purified polyphenols from persimmon leaf and tested their biological activity. The 60% acetone extract was lyophilized and applied to test enzyme inhibition of glucosyltransferase and tyrosinase. GTase was 82.4% inhibited at $1.8{\times}10^{-1}$ mg/ml and tyrosinase 21.7% inhibited at 0.8 mg/ml. The acetone extract was fractionated into F-1, 2, 3, 4, 5 by Sephadex Q-50 gel filtration and the fraction-1 and 2 showed higher enzyme inhibition activity than the other fractions. To the Proteinase K treatment and autoclaving of the two fractions had no effect on the enzyme activity, but these results suggested that active fraction was not protein but phenol ring completed compounds. By Sephadex LH-20, MCI-gel and Bondapak $C_{18}$ column chromatographies, compouds 1, 2, 3 and 4 from F-1 fraction, compounds 5 and 6 from F-2 fraction and compounds 7 , 8 from F-3 fraction were purified and re-crystallized. The purified compounds was assumed to be condensed tannins of frame flavan-3-ol frame on the basis of color reagent reaction and to be a mixture of monomer, dimer and trimer according to TLC analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.482-487
• /
• 2016

Ultra-violet rays are very harmful to eye health care. The blocking of ultra-violet rays and a reduction of optical reflection in the visible light range, which is to increase the share of transmitted light, and avoid the formation of ghost images in imaging, are important for the applications of polymer eyeglasses lenses. In this study, the high-refractive index polymer lenses, n=1.67, were fabricated by injection-molded method with the xylene diisocyanate monomer, 2,3-bis-1-propanethiol monomer, and benzotriazol UV absorber (SEESORB 709) mixture. To reduce the reflection of the polymer lens surfaces, multi-layer anti-reflection (AR) coatings were coated for both sides of the polymer lens using an E-beam evaporation system. The optical properties of the UV blocking polymer lens were characterized using a UV-visible spectrometer. The material properties of the thin films, which were composed AR coating layers, refractive index, and surface roughness, were analyzed by ellipsometry and atomic force microscopy. As a result, the fabricated polymer lens perfectly blocked ultra-violet rays below 395 nm with a blocking rate greater than 99%.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.23-28
• /
• 2017

Pyrolysis characteristics of waste plastic films were investigated by using a thermogravimetric analysis and pyrolyzer-gas chromatography/mass spectrometry. Thermogravimetric analysis results revealed that the pyrolysis of waste plastic films can be divided into two distinct reactions; (1) the decomposition reaction of starch at between 200 and $370^{\circ}C$ and (2) that of other plastic polymers such as PS, PP, PE at between 370 and $510^{\circ}C$. The kinetic analysis results obtained by using the revised Ozawa method indicated that the apparent activation energy of the pyrolysis reaction of waste plastic films was also changed dramatically according to the different decomposition reactions of two major waste plastic film components. Py-GC/MS results also revealed that the typical pyrolyzates of each polymer in waste plastic films were levoglucosan (starch), terephthalic acid (PET), styrene monomer, dimer, and trimer (PS), methylated alkenes (PP), and triplet peaks (PE) composed of alkadiene/alkene/alkane. The phthalate, used as a polymer additive, was also detected on the pyrogram of waste plastic films mixture.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.583-593
• /
• 2013

The based-catalyzed depolymerization (BCD) of kraft lignin isolated from black liquor which the chemical pulping of a mixture of various Southeast Asia hardwood chips was carried out in a batch reactor in the presence of different NaOH concentrations with supercritical methanol. The S:G ratio of the kraft lignin determined by pyrolysis-GC/MS analysis turned out roughly 1.4:1 and main products were vanillic acid, syringol and 3-methoxy catechol. The diethyl ether extracts as phenolic monomers from BCD reaction were produced similar yield among different NaOH concentrations. The 21 compounds were identified by GC/MS analysis in all experiments and major products were catechol, 3-methoxycatechol, 4-methylcatechol, syringol and isovanillic acid. However, it had been shown to be different monomer contents depending on the dosage of NaOH. Catechol, 4-methylcatechol and 3-methoxycatechol were shown to be the dominant monomer from BCD reaction using 7.5 and 3.25% of NaOH concentration whereas syringol, isovanillic acid, 3-methoxycatechol and 4-methylcatechol were determined to be the most typical products under the condition of 1.63% NaOH.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.614-620
• /
• 2012

Polyurethane prepolymers were prepared from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid. Then, aniline terminated waterborne polyurethane dispersion (ATPUD) was synthesized by capping the NCO group of the prepolymer with aniline monomer. Subsequently, ATPUD and waterborne polyurethane dispersion (PUD), respectively, were blended with conducting polymer, poly (3,4-ethylenedioxythiophene)/polystyrene sulfonate [PEDOT/PSS], to yield antistatic coating solutions, and the mixture was coated on the polycarbonate substrates. At adequate addition amounts of PEDOT/PSS less than or equal to 2.5 g, the surface resistances ($1.0{\times}10^{11}{\sim}2.5{\times}10^8{\Omega}/cm^2$) of coating films from ATPUD showed better electronic conductivities than those ($5.0{\times}10^{11}{\sim}6.3{\times}10^9{\Omega}/cm^2$) from PUD. However, at excess amount of PEDOT/PSS of 3.0 g, the surface resistance from ATPUD showed similar electronic conductivity with that from PUD.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.394-398
• /
• 1998

An optimum synthetic condition was studied for the MCS used as a silicone monomer. The contact mixture was made from the four component catalyst system($CuCl/ZnCl_2/Sn/Cd$) and silicon particles. The contact mass was used for a series of experiments with methyl chloride, which were designed and done to explore the optimum condition for MCS synthesis by an experimental design method. The optimum temperature and MeCl flow rate, which were obtained using 50g contact mass at 60rpm and 1 atm, were in the range of $300-305^{\circ}C$ and of 70-80ccm. Also a continuous run was performed to confirm the conditions. The results showed that the average reaction rate and selectivity were 170(g-MCS/hr.kg-Si) and 0.05 respectively at 67% conversion of MeCl and 92% silicon utilization rate. Also the parameters of overall reaction rate equation and a total pressure were estimated on the basis of the results of the continuous run.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.517-521
• /
• 2010

Microprous polyethylene (PE) membranes are widely used as lithium-ion battery separators. A separator having higher meltdown temperature than PE separator is still required for useful safety feature at a high temperature. To enhance meltdown temperature of PE separator, it was coated with polymers synthesized from bis-GMA derivatives by radical polymerization. Polymer was not formed when bis-GMA monomer having a high viscosity was used, while polymers were formed when bis-GMA derivatives having a low viscosity were used. When the separator was coated with polymer synthesized from reaction mixture containing proper amount of bis-GMA derivative, its meltdown temperature were increased up to $160^{\circ}C$ without reduction in the air permeability.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.1070-1083
• /
• 2015

A gene (GT-SM3B) encoding a thermostable secreted oligoendopeptidase (GT-SM3B) was cloned from the thermophile Geobacillus thermoleovorans DSM 15325. GT-SM3B is 1,857 bp in length and encodes a single-domain protein of 618 amino acids with a 23-residue signal peptide having a calculated mass of 67.7 kDa after signal cleavage. The deduced amino acid sequence of GT-SM3B contains a conservative zinc metallopeptidase motif (His⁴⁰⁰-Glu⁴⁰¹-X-XHis⁴⁰⁴). The described oligopeptidase belongs to the M3B subfamily of metallopeptidases and displays the highest amino acid sequence identity (40.3%) to the oligopeptidase PepF_Ba from mesophilic Bacillus amyloliquefaciens 23-7A among the characterized oligopeptidases. Secretory production of GT-SM3B was used, exploiting successful oligopeptidase signal peptide recognition by Escherichia coli BL21 (DE3). The recombinant enzyme was purified from the culture fluid. Homodimerization of GT-SM3B was determined by SDS-PAGE. Both the homodimer and monomer were catalytically active within a pH range of 5.0–8.0, at pH 7.3 and 40℃, showing the K_m, V_max, and k_cat values for carbobenzoxy-Gly-Pro-Gly-Gly-Pro-Ala-OH peptidolysis to be 2.17 ± 0.04 × 10^-6 M, 2.65 ± 0.03 × 10^-3 µM/min, and 5.99 ± 0.07 s^-1, respectively. Peptidase remained stable at a broad pH range of 5.0–8.0. GT-SM3B was thermoactive, demonstrating 84% and 64% of maximum activity at 50℃ and 60℃, respectively. The recombinant oligopeptidase is one of the most thermostable M3B peptidase, retaining 71% residual activity after incubation at 60℃ for 1 h. GT-SM3B was shown to hydrolyze a collagenous peptide mixture derived from various types of collagen, but less preferentially than synthetic hexapeptide. This study is the first report on an extracellular thermostable metallo-oligopeptidase.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.337-342
• /
• 2007

The n-butyllithium-initiated ring-opening polymerization of ethylene oxide, in a mixture of benzene and dimethylsulfoxide (DMSO), between $25-45^{\circ}C$, with potassium tert-butoxide, is a useful and powerful method to control the molecular weight as well as achieve a quantitative chain-end functionalization yield of the resulting polymeric alkoxide via a one pot synthesis. The molecular weight of the product could be controlled by adjusting the ratio of grams of monomer to moles of initiators, such as n-butyllithium ([n-BuLi]) and potassium t-butoxide ([t-BuOK]). The yields for the macromonomer and ${\omega}-brominated$ poly(ethylene oxide) (PEO) were quantitative in relation to the chain-end functionalizations of the polymeric alkoxide formed. The resulting products were characterized by a combination of $^1H-NMR$ spectroscopic and size exclusion chromatographic analyses.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.73-79
• /
• 2013

Waterborne polyurethane dispersion (WPUD) was synthesized from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with an acrylate monomer, methyl methacrylate (MMA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. With increasing the amount of MMA in the AUD, the pencil hardness, abrasion resistance and chemical resistance of the coating films were improved, but the electrical conductivity of the coating films was decreased. On the other hand, the pencil hardness, abrasion resistance and chemical resistance of coating films were decreased, but the electrical conductivity was enhanced with increasing the amount of MWCNT in the conductive coating solutions.