• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.249-253
• /
• 2001

A proposed method of determining the composition of mixed micelles in equilibrium with monomer of known composition is described. The systems were sodium ${\alpha}-sulfonated$ dodecanoyl ethyl esther (${\alpha}-SR_{12}Et$) or sodium dodecyl sulfate(SDS)-polyoxyethylene 23 lauryl ether (Brij 35) un water and in 0.1M sodium chloride solution at $25^{\circ}C$. This technique applies the Gibbs-Duhem equation to the mixed micelles, which is treated as a pseudophase. This proposed methodology, which needs only critical micelle concentration data as a function of monomer composition, is applied to an anionic/nonionic surfactant pair. The calculated monomer-micelle equilibrium is found to be very similar to the much-used regular solution for nonideal systems.

• Membrane Journal
• /
• v.14 no.3
• /
• pp.207-217
• /
• 2004

In this study, we prepared nanofiltration membrane by applying the interfacial polymerization method as a way of manufacturing composite membranes. We have examined the effects of various preparation factors such as monomer concentration and composition, thermal curing condition, post treatment condition. In addition to preparation conditions, we also monitored the effects of operation conditions such as feed solution concentration and operation pressure on the permeation properties of the resulting nanofiltration membrane. We intended to increase the permeation rate of nanofiltration membrane by the enlargement of effective surface area using additives during interfacial polymerization step. With increasing the monomer concentration, membrane permeation rate are decreased with maintaining almost constant rejection. With respect to curing condition, with increasing the curing temperature both permeation rate and rejection are decreased. With increasing the ratio of MPD in amino monomer composition, permeation rate decreased drastically with high rejection. With increasing the feed solution concentration, both permeation rate and rejection decreased. Both permeation rates and rejection increased with increasing the operating pressure. Nanofiltration membrane have higher surface roughness with increasing additive concentration in the case of using MPD contained amine composition than using piperazine alone. Permeation rates are much lower than the nanofiltration membrane prepared by piperazine.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.482-487
• /
• 1999

Periodate-oxidized soluble starch and maltohexaose reacted with ${\alpha}-NH_2$ group of free amino acids and ${\varepsilon}-NH_2$ group of peptidyl lysine. The result shows that periodate-oxidized soluble starch and maltooligosaccharides reacted with protein and formed Schiff base between CHO group of oxidized sugar and ${\varepsilon}-NH_2$ group of surface lysine of protein molecule. Carbon and hydrogen composition of sweet potato ${\beta}-amylase$ modified with oxidized soluble starch increased and it's nitrogen composition decreased. Carbohydrate contents of sweet potato ${\beta}-amylase$ modified with oxidized soluble starch were 13.2% (pentamer), 13.4% (monomer), and with oxidized maltohexaose were 9.7% (pentamer), 9.3% (monomer) by $phenol-H_2SO_4$ method. Alpha-amino group of N-terminal, and ${\varepsilon}-NH_2$ group of lysine, of sweet potato ${\beta}-amylase$ were reacted with oxidized soluble starch by dinitrophenylation were 70% (pentamer), 73% (monomer) and 33% (pentamer), 26% (monomer), respectively, in comparison with native enzyme.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2013

Purpose: This study is to provide basic data of the dental acrylic denture base resin in the mechanical property difference investigation according to the monomer composition weight ratio of the acrylic denture base resin. Methods: The monomer composition of the acrylic denture base resin and weight ratio makes the different specimen. It measured the mechanical property with the specimens through Hardness Test, Tensile Test, Flexural Test, Flexural Modulus, FT-IR Test. Results: The control group Vertex was 18.4 Hv and the experimental group MED was 14.46~19.07Hv in the hardness test. Vertex was 364N, MED-3 was lowest in the tensile strength test and the Head of a family cursor declination was big. The result declination of the experimental specimens showed. Vertex and MED-2 was the highestest in the flexural test and after coming MED-6, MED-5, MED-1, MED-3, MED-4. Vertex and MED-2, as to a spectrum for $500{\sim}1800cm^{-1}$ peak can show the excellent degree of polymerization in the FT-IR Test. Conclusion: The ideal weight ratio of the monomer of the acrylic denture base resin of which the mechanical property is the highestest was MMA 100g, EDGMA 5g, DMA 0.2g, of MED-2.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.519-527
• /
• 2004

Stable poly(methyl methacrylate-co-divinylbenzene) (poly(MMA-co-DVB)) microspheres were prepared by precipitation polymerization using acetonitrile as the main medium under various polymerization conditions, including modifications of the agitation speed, monomer and initiator concentrations, DVB content in the monomer mixture, and the use of various cosolvents. Gentle agitation was required to obtain smooth spherical particles. The individually stable microspheres were obtained at monomer concentrations of up to 15 vol% in an acetonitrile medium. The number-average diameter increased linearly with respect to increases in the monomer and initiator concentrations. We found, however, that the uniformity of the microspheres was independent of the variation of the polymerization ingredients because nuclei formation was solely influenced by the crosslinking reaction of the monomers. We obtained higher yields for the polymerization at higher concentrations of monomer and initiator. The concentration of DVB in the monomer mixture composition played an important role in determining not only the size of the microspheres but also the yield of the polymerization. In addition, although we employed various cosolvents as the polymerization medium, we found that acetonitrile/2-methoxyethanol was the only system that provided spherical particles without coagulation. This finding indicates that the precipitation polymerization is strongly dependent on the solvent used as the medium.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.91-102
• /
• 1994

The monomer compositions in a series of propylene heterophasic copolymer, propylene random copolymer, propylene random terpolymer and ethylene-propylene-ENB terpolymer have been determined from $^{13}C-NMR$ spectra. The simplified and highly resolved $^{13}C-NMR$ spectra made it possible to assign unambiguousely and calculate the monomer composition. A complete sets of NMR chemical shift assignments and the way to measure the quantity of monomer are newly given in diverse polymers. Furthermore complete dyad, triad, tetrad and pentad distributions have been able to be determined. These NMR quantitative analytical results for monomer compostition have consistent with those from Infrared spectral data.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4130-4136
• /
• 2021

By polymerization of gadolinium methacrylate (Gd (MAA)₃), lead methacrylate (Pb(MAA)₂) and methyl methacrylate (MMA), Gd and Pb were chemically bonded into polymers. The X-ray shielding performance was evaluated by Monte Carlo simulation method, and the results showed that the more metal functional organic monomer, the better the shielding performance of terpolymers. When the X-ray energy is 65 keV, Gd (MAA)₃-containing polymers have better shielding performance than Pb(MAA)₂-containing polymers. Gd could compensate for the weak absorption region of Pb. Therefore, polymers containing both Gd and Pb enhanced shielding efficiency against X-ray in various low-energy ranges. For obtaining terpolymers with uniform monomer compositions, the relationship between the monomer composition of the terpolymers and the conversion level was optimized by calculating the reactivity ratios. The value of reactivity ratios of r (Gd (MAA)₃/Pb(MAA)₂), r (Pb(MAA)₂/Gd (MAA)₃), r (Gd (MAA)₃/MMA), r (MMA/Gd (MAA)₃), r (Pb(MAA)₂/MMA) and r (MMA/Pb(MAA)₂) was 0.483, 0.004, 0.338, 2.508, 0.255, 0.029. The terpolymers with uniform monomer composition could be obtained by controlling the monomer compositions or conversion levels. The results can provide new radiation protection materials and contribute to the improvement in nuclear safety.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.808-816
• /
• 1994

The work present here shows the technique to produce p-Doped polypyrrole particles by semibatch dispersion polymerization using steric-stabilizer. Monomer-starved polymerization process was successful to increase the particle size up to 50 nm in case of polyvinylalcohol (PVA) stabilizer, and up to 95 nm in case of methylcellulose stabilizer. The particle size and the bulk conductivity changed with the feed rates of monomer, the concentrations of initiator (dopant) and the type, molecular weight, concentrations of steric-stabilizer.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.381-385
• /
• 2010

Aiphatic diester monomer, 3-[(benzyloxycarbonylamino)butyl]-1,4-dioxane-2,5-dione (BABD), was synthesized with the N-$\varepsilon$-benzyloxy-carbonyl-L-lysine as starting material. This monomer was synthesized to add the functionality to poly(lactic acid)s. BABD unit was successfully incorporated into the PLLA chain which was confirmed by $^1H$ NMR. The copolymer composition could be controlled by the feed ratios of monomer. The $M_n$ of this resultant polymer is expected to reach high molecular weight after the purification of monomer and optimization of polymerization time, though the polymer showed relatively low degree of polymerization ($M_n$＝3300). The copolymer is expected to possess the enhanced hydrophilicity and the possibility of chemical modification on amino group.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.91-95
• /
• 2001

Reflective holographic polymer dispersed liquid crystal(HPDLC) device has a multilayer structure consisting of alternate layers of polymer and liquid crystal droplets. Periodic modulation of a refractive index reflects light of a specific wavelength in accordance with Braggs law. Samples cured isotropically were illuminated with an Argon-ion lase at 514nm. We optimized the reflcetion efficiency of HPDLC as a function of monomer functionality, LC composition and irradiation intensity. The properties of the HPDLC films were observed by UV-visible spectroscopy. We found that the maximum reflection efficiency depends on the monomer functionality, LC composition, and laser intensity. We expect these films could be used in full-color reflective display by stacking them to obtain a mixture of colors.