• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.49-56
• /
• 2003

The purposes of this study are to improve the ultrasound resolution of various nylon and metallic mono-filament wires, therefore, it was tested that it analyze on nylon mono-filament wire of 0.1 mm in A Co.'s ultrasonic phantom and synthesis of C15 g tissue mimicking materials(TMM), analyze resolution of nylon and metallic mono-filament wires in water and TMM. The results obtained were summarized as follows: 1. Metallic mono-filament wire of 0.1 mm and nylon mono-filament wire of 0.12 mm, 180 denier showed that it cleared dot echo pattern. 2. Metallic and nylon mono-filament wire of 0.2 mm showed that it cleared comet tail echo by reverberation artifact. 3. Nylon and metallic mono-filament wire of 0.1 mm showed that it can used for dead zone and axial resolution test. 4. Nylon mono-filament wire compared with metallic mono-filament wire showed that it satisfy elasticity and construction. 5. Degree of hardness of na not changed mono-filament's echo textures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.11-16
• /
• 1972

During the period from 1966 to 1968, total catches of Spanish mackerel averaged 6,000 to 7,000M/T per annual in Korea, and approximately 70 per cent of this amount was captured by drift nets. In an effort to improve the efficiency of drift nets, some experiments were conducted in 1969 to investigate the selectivity of material and mesh sizes. Seven different mesh sizes (80,85,95,100,105,110 and 115 mm) of both multi- and mono-filament netting were used, and the following results were obtained : 1, The body weight of Spanish mackerel taken with the seven different mesh sizes ranges from 0.5kg to 2.9kg, and the mode of body weight consists of three groups, 1kg ($21%$), 1.3kg($15\%$) and 1.5kg($19\%$). 2. For multi-filament net, 80 to 105mm mesh sizes were suitable to catch those three groups, and a little smalter than these for mono-filament net. 3. For Spanish mackerel only, the mono-filament material proved to have 1.5 times better selectivity than multi-filament : however, the latter proved superior for miscellaneous fish species due to its different size and shape. 4. Multi-filament net showed better selectivity for smaller species than mono-filament. (and mono-filament in general indicated opposite phenomenon.)

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.6-8
• /
• 2000

The critical current density, Jc, of superconductor tape significantly depends on microstructural evolution during mechanical deformation. In this study, we fabricated Bi-2223 superconductor tape by PIT technique, and investigated mechanical properties of mono- and 61-filamentary tapes and their joined tapes. The strength of mono-filament tape was higher than those of 61-filament tape was higher than those of 61-filament tape, respectively. On the other hand, elongation of mono-filament tape, respectively. On the other hand, elongation of mono-filament tape was lower than 61 filament tape. The joined tapes shows lower strength and irreversible strain than those of unjoined tapes. The reduced strength and irreversible strain for joined tape is probably related to the induced damages such as irregular interface and Ag-instrusion in the transition region which acts as a stress concentration.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.13-19
• /
• 1995

Spin finish(SF) for nylon filament was prepared. The influence on the properties of filament obtained by treating the prepared spin finish in this study(SF-2) and foreign-made spin finish(Spinnar N-100) was compared. SF-2 prepared by blending of spindle oil 70g, paraffin wax 10g, glyceryl mono-oleate 5g, POE(6) nonylphenyl ether 4g, POE(10) nonylphenyl ether 4g, POE(10) octylphenyl ether 2g, POE(14) mono-oleate 4g and water 1g was excellent in its characteristics. Some of the properties of Nylon filament treated with SF-2 were better than those treated with Spinnar N-100. Also, optimal physical conditions of nylon filament according to the number of revolution of oil roller were obtained at conditions of 5rpm of number of revolution oil roller, 1.25% of SF-2 oil pick up, and denier 69D.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.6
• /
• pp.37-42
• /
• 2002

This study has been performed to investigate the physical and mechanical characteristics of compaction, volume change and compressive strength for reinforced soil mixed with polypropylene fiber, and to confirm the reinforcing effects with admixture such as polypropylene fiber. To this end, a series of compaction test and compression test was conducted for clayey soil(CL) and polypropylene fiber reinforced soil. In order to determine proper moisture contents and mixing ratio, pilot test was carried out for natural soil and PFRS(polypropylene fiber reinforced soil). And the mixing ratio of mono-filament fiber and fibrillated polypropylene fiber admixture was 0.1%, 0.3%, 0.5% and 1.0% by the weight of dry soil. From the experimental results, it was found that the optimum moisture contents(OMC) increased with the mixing ratio of fiber, but the maximum dry unit weight and the volume change was decreased with the mixing ratio. It means that the improvement of the workability and the reduction of the weight of embankment was done by the addition of the polypropylene fiber. And, from the compression test results, it was found that the addition of the polypropylene fiber remarkably improved the compressive strength of PFRS. And it was observed in the viewpoint of strength that the fibrillated polypropylene fiber reinforced soil was more effective than the mono-filament polypropylene fiber reinforced soil.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.39-45
• /
• 2006

The aim of this work is to develop sense-differentiated textiles using Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The ITY(Interlace Textured Yarn) using T-T yarn with various over feed ratios of PET filament was manufactured with different shrinking percentage of core yarn and then the fabrics were woven on the same weaving 100m using ITY produced. The mechanical properties and the handles of the fabrics were examined with KES-FB system suggested by Kawabata. The shrinkage of ITY was increased with decreasing over feed ratio and increased with increasing heat treatment temperature of T-T yarn. The initial elasticity modulus of ITY was decreased with increasing over feed ratio and heat treatment temperature of T-T yarn. The tensile energy of fabrics was decreased with increasing of over feed ratio, but bending rigidity and shear rigidity of fabrics were increased with increasing of over feed ratio of PET filament. The results indicate that the fabric using T-T yarn with finer than I denier mono filament can be used for the purpose of sense-differentiated textile.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.444-448
• /
• 1998

This paper presents the results of an experimental investigation on the compaction and compressive strength of polypropylene fiber reinforced soils. This study has been performed to obtain the physical properties of PFRS(polypropylene fiber reinforced soil) such as strain-stress relationships, OMC(optimum moisture contents) and ${\gamma}$$_{dmax}$ (maximum dry unit weight), with four different concentrations(i.e., 0.1%, 0.3%, 0.5% and 1.0% weights) of mono-filament and fibrillated polypropylene fibers. The test results indicate an appreciable increase in strength due to addition of fibers. OMC is increased with the concentration ratio of fiber, but ${\gamma}$$_{dmax}$ is decreased. From the viewpoint of strength, the fibrillated polypropylene fiber soil is more effective than the mono-filament polypropylene fiber soil.oil.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.431-437
• /
• 1998

This study was performed to ascertain the three-dimensional effect of the crack reduction and the restrained effect of crack growth, and to yield a suitable mixing ratio of the synthetic fiber reinforced soil. The results of the study are as follows ; 1) The synthetic fiber has the resisting force for crack because of the adhesion due to the attraction of soil particles. 2) As the synthetic fiber length and the mixing ratio are increased, mono filament synthetic fiber reinforced soil is increased the effects of crack reduction and the restraint of crack growth. 3) The fibrillated synthetic fiber is more effective than mono filament synthetic fiber for crack. 4) A suitable mixing ratio of synthetic fiber reinforced soil is 0.5% of the fibrillated synthetic fiber.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.5
• /
• pp.93-98
• /
• 1999

The results of an experimental investigation on the characteristics of compaction and compressive strength of polypropylene fiber reinforced soil are presented in this paper. This study has been performed to obtain the physical properties of PFRS(polypropylene fiber reinforced soil) such as strain-stress relationships, OMC(optimum moisture contents) and ${\gamma}$dmax (maximum dry unit weight), with four different contents (i.e., 0.1%, 0.3%, 0.5% and 1.0% weights ) of mono-filament and fibrillated polypropylene fibers. From the compaction test results, it is found that OMC increased with the contents ratio of fiber, but ${\gamma}$dmax decreased. It means that the improvement of the workability and the reduction of the weight of embankment structures by the asddtion of the polypropylene fiber. And, from the compression test results, it is found that the additon of the polypropylene fiber remarkably improved the compressive strength of PFRS. And it was observed in the viewpoint of strength that the fibrillated polypropylene fiber reinforced soil is more effective than the mono-filament polypropylene fiber reinforced soil.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.73-76
• /
• 1999

We have fabricated and tested a Bi-based high temperature superconducting current lead system. Ag sheathed Bi-2223 mono-filament tapes of $I_c=8.4$ A at 77 K under self-field condition were fabricated using powder-in-tube(P1T) method. Multi-layer current leads can be made by stacking of Ag sheathed Bi-2223 mono-filament wires. The critical current of this 10-layer current lead is about 68 A. The contact resistance across the copper-current lead interface has been studied using current-voltage characteristics. At temperature below critical temperature the resistive contribution of the interface to the total contact resistance dominates. We have measured AC transport losses in a current lead at 77 K, 60 Hz by a transport method.