• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.171-173
• /
• 2018

The poor working conditions of transit drivers not only lead to mental stress and fatigue accumulation of workers, but also to the main causes of mass transit accidents. Stress and fatigue accumulation are closely related to the vital signs because they affect the psychological and physical health. In this paper, we designed a digital garment which can measure driver's health condition by measuring electrocardiogram, pulse rate and body temperature. Also proposed a system that transmits the measured bio-signal to the smartphone app via Bluetooth and transmits the current position of the driver to the server by using the built-in GPS of the smartphone, assuming there is something wrong.

• Journal of Digital Contents Society
• /
• v.18 no.5
• /
• pp.895-904
• /
• 2017

In this paper, we propose an IoT based smart outlet system for one-person household with electric safety, electric energy consumption management and transmission of messages to the reserved contacts by connecting the emergency network. The proposed smart outlet system is implemented by parsing packet data and protocol between server, module, application and WiFi AP receiver. The WiFi AP built for communication can be used not only for the outlet but also for the gas barrier, the door lock and the like. In addition, the proposed method can provide the remote monitoring function by receiving the amount of power of the receptacle received through the AC current sensor (SCT-013) in real time. The smart outlet system is expected to be capable of automatically shutting off the power in case of emergency through automatic power use analysis in addition to the standby power cutoff function.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.129-135
• /
• 2017

In this paper, we propose a system to monitor the condition of elderly people who are uncomfortable by using smart-phone and biometric sensor at any time and for care-givers to provide with the best medical service anytime and anywhere. The proposed system monitors the status of the elderly through various bionic sensors installed in the hospital ward based on the Arduino system and not only provides the physiological and medical services required by the elderly, but also informs the guardian so that he can cope with the emergency. In conclusion, this paper suggests that a reading light used by elderly people can operate as a home server with a biosensor using Arduino and Android applications (Apps.), and the smart-phone of care-givers is configured as a remote management and a emergency call system. Therefore, this study suggests important ways to improve the satisfaction of medical service for the both elderly people and care-givers of chronic diseases in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.100-107
• /
• 2015

Recently as the manufacturers want competitiveness in dynamically changing environment, they are trying a lot of efforts to be efficient with their production systems, which may be achieved by diminishing unplanned operation stops. The operation stops and maintenance cost are known to be significantly decreased by adopting proper maintenance strategy. Therefore, the manufacturers were more getting interested in scheduling of exact maintenance scheduling to keep smooth operation and prevent unexpected stops. In this paper, we proposedan integrated maintenance approach in injection molding manufacturing line. It consists of predictive and preventive maintenance approach. The predictive maintenance uses the statistical process control technique with the real-time data and the preventive maintenance is based on the checking period of machine components or equipment. For the predictive maintenance approach, firstly, we identified components or equipment that are required maintenance, and then machine parameters that are related with the identified components or equipment. Second, we performed regression analysis to select the machine parameters that affect the quality of the manufactured products and are significant to the quality of the products. By this analysis, we can exclude the insignificant parameters from monitoring parameters and focus on the significant parameters. Third, we developed the statistical prediction models for the selected machine parameters. Current models include regression, exponential smoothing and so on. We used these models to decide abnormal patternand to schedule maintenance. Finally, for other components or equipment which is not covered by predictive approach, we adoptedpreventive maintenance approach. To show feasibility we developed an integrated maintenance support system in LabView Watchdog Agent and SQL Server environment and validated our proposed methodology with experimental data.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.6
• /
• pp.55-65
• /
• 2019

With the rapid development of the national industry, the importance of electrical safety was recognized because of a lot of new electrical equipment are installing and the electrical accidents have been occurring annually. Today, the electrical equipments is inspect by using the portable Infrared thermal imaging camera. but the most negative element of using the camera is inspected for only state of heating, the reliable diagnosis is depended with inspector's knowledge, and real-time monitoring is impossible. This paper present the infrared thermal imaging safety diagnosis system. This system is able to monitor in real time, predict the state of fault, and diagnose the state with analysis of thermal and power data. The system consists of a main processor, an infrared camera module, the power data acquisition board, and a server. The diagnostic algorithm is based on a mathematical model designed by analyzing the Pearson's Correlation Coefficient between temperature and power data. To test the prediction algorithm, the simulations were performed by damaging the terminals or cables on the switchboard to generate a large amount of heat. Utilizing these simulations, the developed prediction algorithm was verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.192-201
• /
• 2005

DiffServ supports aggregated traffic classes to provide various QoS to different classes of traffics. However, current DiffServ specifications do not have a complete QoS management framework. It is possible to lead to serious QoS violations without a QoS management support. From this reasoning, a QoS management system that can manage differentiated QoS provisioning is required. This paper proposes and implements a policy-based QoS management platform for differentiated services networks, which specifies QoS policies to guarantee dynamic QoS requirements. The implementation of the proposed platform is built on W framework and uses XML to represent and validate high-level QoS policies. High-level QoS policies are represented as valid XML documents and are mapped into Em beans of the EJB-based policy server of the platform. The policy distribution and the QoS monitoring are processed using SNMP.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.3
• /
• pp.521-530
• /
• 2017

In this paper, we propose a protection solution against intelligent Ransomware attacks by encrypting not only source files but also backup files of external storage. The system is designed to automatically back up to the cloud server at the time of file creation to perform monitoring and blocking in case a specific process affects the original file. When client creates or saves a file, both process identifiers, parent process identifiers, and executable file hash values are compared and protected by the whitelist. The file format that is changed by another process is monitored and blocked to prevent from suspicious behavior. By applying the system proposed in this paper, it is possible to protect against damage caused by the modification or deletion of files by Ransomware.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.667-670
• /
• 2005

As security and surveillance have become the center of interest, remote controlled CCTV(Closed-Circuit Television) market has been formed while rapid development of digital image compression technology and Internet triggered the advent of web cameras. The characteristic of web camera is that it can provide users with higher quality image than CCTV at any place where Internet access is available. However, As for the system administrator, the existing web camera have disadvantage in that they allows users only. who are connected to the server of the web camera, to see the image from it. In this paper, in order to make up for this defect, designed multi-vision interface showing multi images on single screen and, for the purpose of the improvement in efficiency, the functions of saving images and of scheduling the time to save the images.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.9-16
• /
• 2002

As existing analog video surveillance systems could save and retrieve data only in a limited space within short distance, it had many constraints in developing into various application systems. However, on the back of development of the Internet and computer technologies, digital video surveillance systems can be controlled from a remote location by web browser without space limits. Moreover, data compression and management technologies with Index Search algorithm make it possible to efficiently handling, storing, and retrieving a large amount of data and further motion detection algorithm enhances a recording speed and efficiency for a practical application, that is, a practical remote recordable video surveillance system using our efficient algorithms as mentioned, called WebCam. The WebCam server system can intelligently record and save video images digitized through efficient database management, monitor and control cameras in a remote place through user authentication, and search logs.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.445-454
• /
• 2006

Almost of industrial measuring instruments usually are equipped only with serial communication devices. In order to connect these instruments to internet, we implement an embedded translator. This device has the hardware components composed of one WAN port, two LAN ports, and two UARTs, and functions as a communication translator between serial and internet communication. it also provides web-based monitoring function that is absent from existing serial-to-ethernet converter. The hardware is implemented using the KS8695 network processor which s an ARM922T as processor core. We have installed the boa web server and utilized the CGI function for internet-based remote control, added the IP sharing function which allows the network with private IP addresses to access the internet, and developed a serial-to-ethernet translation program. Finally, we show an application example of the developed translator that remotely monitors the solar energy production system.