• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.117-121
• /
• 2005

In order to monitor the levels and seasonal variations of EDCs, samples of the discharged effluent from sewage & wastewater treatment plants and river waters were collected. The target EDCs including bisphenol A and alkylphenols were determined by Laser-induced fluorescence(LIF) as in-situ monitoring technique. The category of EDCs showed similar fluorescence spectra and nearly equal decay time. This point makes it hard to distinguish each EBCs from the EDCs mixture by LIF and LIF results were expressed only by the total EDCs. However, LIF monitoring results and GC-MS results was comparable. The correlation coefficient between EDCs concentration acquired from GC-MS and fluorescence intensity from LIF was significant. This study supports the feasibility of the application of LIF into EDCs monitoring In aquatic system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술세미나 논문집
• /
• pp.93-104
• /
• 2000

By means of analyzing the problems in monitoring plan, design, installation, operation based on maintenance monitoring system installed in subway tunnel section, the methods of improvement were proposed for applying to subway monitoring maintenance effectively in future. The choice of the better monitoring system, the operating method of monitoring system, the confidence and continuity of maintenance monitoring, the performance of responsible monitoring supervision in the phase of the planning of monitoring and design were proposed. The problem and developed plan in the different monitoring systems, the calibration and correction of monitoring system, the analysis for the results and plan for maintenance in the phase of installation of monitoring system and operation were also proposed.

• 한국의류산업학회지
• /
• 제24권2호
• /
• pp.195-205
• /
• 2022

This study examines the image management behavior according to self-monitoring, self-objectification of profile-based SNS users. Questionnaires were administered to 313 SNS users including both men and women in their 20s to 30s. The SPSS 25.0 package was utilized for data analysis, which included frequency analysis, factor analysis, Cronbach's ?, t-test, and regression analysis. The study analyzed self-monitoring in 2 groups (high, low), self-objectification for 2 factors (body surveillance, body shame), and image management behavior for 5 factors (fashion oriented, instrumentality, conformity, ostentation, interpersonal disposition). The results revealed: first, self-monitoring groups exhibited significant differences in self-objectification. The higher self-monitoring group was more influenced by body surveillance and body shame compared to the low self-monitoring group. Second, self-objectification had a positive influence on all the factors of image management behavior. Especially, body surveillance demonstrated a high influence on instrumentality and body shame showed a high influence on ostentation. Third, the self-monitoring groups showed significant differences in all the factors of image management behavior. The higher self-monitoring group demonstrated more influence of image management behavior compared to the low self-monitoring group. These results provide useful information in understanding the influence of social media on users' psychological attitude and consciousness toward their body and image management behavior.

• Structural Monitoring and Maintenance
• /
• 제10권3호
• /
• pp.261-281
• /
• 2023

Magnetic flux sensors are commonly used in monitoring the cable force, but the application of the sensors in large diameter non-closed Galfan cables, as those adopted in Yueqing Gymnasium which is located in Yueqing City, Zhejiang Province, China and is the largest span hybrid space structure in the world, is seldom done in engineering. Based on the construction of Yueqing Gymnasium, this paper studies the cable tension monitoring using the magnetic flux method across two stages, namely, the pre-calibration stage before the cable leaves the rigging factory and the field tension formation stage of the cable system. In the pre-calibration stage in the cable factory, a series of 1:1 full-scale comparative tests were carried out to study the feasibility and relability of this kind of monitoring method, and the influence on the monitoring results of charging and discharging voltage, sensor location, cable diameter and fitting method were also studied. Some meaningful conclusions were obtained. On this basis, the real-time cable tension monitoring system of the structure based on the magnetic flux method is established. During the construction process, the monitoring results of the cables are in good agreement with the data of the on-site pressure gauge.The work of this paper will provide a useful reference for cable force monitoring in the construction process of long-span spatial structures.

• 생태와환경
• /
• 제38권spc호
• /
• pp.76-83
• /
• 2005

The marked increase in the number of environmental problems, combined with the increase in their intensity and spatial extent, has resulted in an ever-increasing need for constant monitoring. This is complicated by the occurrence of new and complicated environmental issues that often prevent a thorough understanding of the entire monitoring framework. In the present study, a diagrammatic method was developed to present the entire framework of a monitoring plan. The diagram was separated into three sections- "Problem Section", "Research Process and Data Section" and "Entities Section" - to clearly present the disparate relationships between monitoring objectives and the monitoring procedure. Notation of the diagrams was undertaken using Unified Modeling Language (UML). A hypothetical monitoring plan for an environmental problem was designed to assess usefulness of the diagrammatic method. The diagram was capable of reviewing and revising the monitoring plan and could be used to select a monitoring procedure according to the monitoring objectives of the plan. The results suggested that this diagrammatic method was effective for designing an appropriate monitoring plan for a given monitoring objective.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.161-167
• /
• 2001

By means of analyzing the problems in monitoring plan, design, installation, operation based on maintenance monitoring system installed in subway tunnel section, the improved methods of were proposed for applying to subway monitoring maintenance effectively in the future. The choice of the better monitoring system, the operating method of monitoring system, the confidence and continuity of maintenance monitoring, the performance of responsible monitoring supervision in the phase of the planning of monitoring and design were proposed. The problem and developed plan in the different monitoring systems, the calibration and correction of monitoring system, the analysis for the results and plan for maintenance in the phase of installation of monitoring system and operation were also proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1513-1515
• /
• 2004

This paper describe the power quality monitoring results of the grid-connected wind turbine generator in Daegwallyeong Test Site. The power quality monitoring for grid-connected wind turbine generators are important to verify their performance as the grid-connected generators. In order to measure the impacts on the grid of wind turbine generator and evaluate the performance by analyzing electrical parameters, we equipped the power quality monitoring system in the real field of the Daegwallyeong test site. The developed monitoring system gathers information by remote access through the internet. The monitoring results and the detail explanation for the developed wind turbine monitoring system is presented in the study.

• 한국보육지원학회지
• /
• 제13권3호
• /
• pp.19-38
• /
• 2017

Objective: The purpose of this study is to examine the practical experiences of childcare experts, parents, and daycare center directors who participated in the 'Daycare Centers Monitoring Program' carried out in K city. Methods: Participants were three childcare experts who belong to the monitoring group in K city, three mothers with infants and children, and three daycare center directors who were selected for the 'Daycare Centers Monitoring Program'. Results: As a result of the research, the childcare experts experienced the following; 1) sharing interesting experiences with parents, 2) a perception of the monitoring program for taking advantage of mutual strengths, 3) the opportunity of maintaining a sense of presence in early childhood education institutions, et al. The mothers' experiences were shown to include, 1) resolving small questions about the operation and management of a daycare center, 2) feelings of relief through observing the life style of infants and children, 3) the joy and reward of being a member of the monitoring group, et al. The directors' experiences were indicated to include 1) a psychological discomfort recognized as a target of the daycare monitoring and as 'another evaluation', 2) the confusion caused by different reviews, 3) an ambiguity on the unfamiliar indexes and contents electronically documented, et al. Conclusion/Implications: Based on these results, there was a discussion about actual suggestions and educational implications on the daycare monitoring program in order to improve the quality of daycare services in childcare centers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.436-452
• /
• 2008

In this study, the settlement prediction method based on field monitoring data under preloading improvement with ramp loading is developed. Settlement behavior can be predicted with field monitored settlement throughout the entire preloading process including ramp loading followed by constant loading. The developed method is verified by comparing its predicted results with results from physical model tests and field monitoring data.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.167-173
• /
• 1999

This paper presents results of monitoring grinding processes with on-the-machine measurement of surface roughness by using nux ratios of scattered lights. A compact, on-the-machine surface roughness sensor. which consists of a diodelaser and several optic units. is developed. The control unit is also developed. The developed sensor together with the controller is applied for monitoring grinding processes of two different grinding machines. Experimental results show that the nux ratios and their standard deviations measured by the developed sensor over the entire ground surface are useful for monitoring grinding conditions. In particular, the sensor and the control unit are proved to be useful for monitoring grinding processes in order to detect abnormal grinding conditions and dressing time.