• 한국지반환경공학회 논문집
• /
• 제19권1호
• /
• pp.25-30
• /
• 2018

저수지 및 제방에서의 계측은 가장 높이가 높은 구간을 선정하여 계측기를 매설하고 측정하는 집중계측 방식으로 최근에는 자동화 계측기술이 발달되어 실시간으로 계측결과가 관리사무소로 전달 및 수집, 저장되고 있다. 실시간 계측기술이 발달되었음에도 불구하고 계측결과가 시설물 관리와는 직접적으로 이용되지 못하고 있다. 최근 사물인터넷 기반의 무선 센서 네트워크 계측기술이 발달함에 따라 본 연구에서는 저수지 및 제방 구조물에 무선센서 네트워크 기술을 기반의 실시간 계측 및 평가시스템을 제안하였다. 적용성 평가를 위한 침투해석 결과 저수위 변화에 따라 제체 내부의 침윤선 변화와 함께 토체의 체적함수비가 함께 변화하여 체적함수비를 센서 노드로 설정한 계측시스템의 적용성을 확인하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.417-420
• /
• 2001

The monitoring system for maintaining on-site wastewater treatment plants(Biofilter) was developed. Proposed system applied PLC(Programmable Logic Controller) technique. In process of development, the research against the monitoring parameters which will be able to represent condition and operation of the plants was accomplished. These parameters are ORP(Oxidation-Reduction Potential), Water Level, Pump and Power on/off. Also, to measure, collect, transfer and display these parameters, DMU(Data Measurement Unit), MCU(Main Controller Unit) and Display Board were produced.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권1호
• /
• pp.49-55
• /
• 2022

This study is to develop a mobile type environmental radiation measurement system for emergency response or environmental radiation monitoring of local governments near nuclear facilities. A mobile radiation measurement system can monitor radiation by field beyond the spatial constraints of a fixed environmental radiation monitor. If installed in local government infrastructure such as public transportation, environmental radiation can be monitored without additional manpower and measurement work. In addition, it is designed to enable monitoring and measurement of radiation from low to high doses as well as the environment in preparation for radioactive disasters such as nuclear power plant accidents. It is expected that this system will be utilized not only in normal times but also in the event of a radiation accident to improve the disaster prevention capabilities of local governments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.71-76
• /
• 2005

이 논문에서는 수리시설물을 효율적으로 유지관리하기 위하여 저수지 및 방조제제체에 계측 시스템을 설치하고, 전기비저항, SP, 수위, 간극수압 및 지중변위를 주기적으로 모니터링하여 그 결과를 분석함으로써 제체의 누수현상 및 안정성 평가를 시도하였다. 저수지 및 방조제의 체제에 설치된 전기비저항/SP 측정 시스템으로부터 측정한 각 단계별 측정 자료의 변화영상을 구하고, 변화추이를 비교분석함으로써 누수현상을 정확하게 파악할 수 있었고, 수위, 간극수압 및 지중변위량의 자료를 종합적으로 해석함으로써 제체의 안정성을 평가할 수 있었다. 이러한 결과로부터 종래의 일시적으로 실시한 물리탐사 결과로부터 누수현상을 파악하는 것보다 모니터링 계측시스템을 설치하여 운용하는 것이 수리시설물을 효율적이고 경제적으로 유지관리하기 위한 방법임을 알았다.

• 지구물리와물리탐사
• /
• 제8권2호
• /
• pp.177-183
• /
• 2005

이 논문에서는 수리시설물을 효율적으로 유지관리하기 위하여 저수지 제체에 계측 시스템을 설치하고, 전기비저항, 수위, 간극수압 및 지중변위를 주기적으로 모니터링하여 그 결과를 분석함으로써 제체의 누수현상 및 안정성 평가를 시도하였다. 저수지 제체의 댐마루에 설치된 전기비저항 측정 시스템으로부터 측정한 각 단계별 전기비저항의 변화영상을 구하고, 변화추이를 비교분석함으로써 누수현상을 정확하게 파악할 수 있었고, 수위, 간극수압 및 지중변위량의 자료를 종합적으로 해석함으로써 제체의 안정성을 평가할 수 있었다. 이러한 결과로부터 종래의 일시적으로 실시한 전기비저항탐사 결과로부터 누수현상을 파악하는 것보다 전기비저항 등 모니터링 계측시스템을 설치하여 운용하는 것이 수리시설물을 효율적이고 경제적으로 유지관리하기 위한 방법임을 알았다.

• 한국철도학회논문집
• /
• 제5권3호
• /
• pp.148-157
• /
• 2002

A health monitoring system becomes a useful tool to obtain information on long term behavior of the important railway structures such as very long span and special type bridges. The health monitoring system not only gives the direct measurement data of the railway bridges but also provides the basic data on the maintenance of the structures. Therefore, periodic calibrations of the health monitoring system will be a necessary step toward precise and accurate assessment of the railway bridges. In this study, the calibration and gauge factor readjustment process made for the health monitoring system installed in the railroad bridges is reviewed and some findings are explained in detail: specifically, the calibrators made for this purpose are illustrated and the regression processes of the calibration on long-term displacement using water level sensor, longitudinal displacement using LVDT sensor, instantaneous displacement using LVDT sensors and accelerometer are described in full length. Based on the regression results, it was found that the gauge factors need to be readjusted according to the regression equation but, since the deviation or shift is not serious so far, long-term observation on each sensor is also recommended. Future work will be concentrated on the long-term analysis of each sensor and on the database creation so that the assessment of the structures is possible.

• 센서학회지
• /
• 제19권1호
• /
• pp.43-51
• /
• 2010

In this study, wearable ECG measurement system was implemented for health monitoring during daily life. A wearable belt-type ECG electrode worn around the chest by measuring the real-time ECG is produced in order to minimize the inconvenience in wearing. The measured ECG signal is transmitted via an ultra low power consumption wireless data communications unit to personal computer using Zigbee-compatible wireless sensor node. The ECG monitoring program is developed at end user which is personal computer. The measured ECG contains many noises mainly due to motion artifacts. For ECG signal processing, adaptive filtering process is proposed which can reduce motion artifacts efficiently and accurately than digital filter. The experimental results show that a reliable performance with high quality ECG signal can be achieved using this wearable ECG monitoring system.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.218-221
• /
• 2009

This paper reports on measurement method for the fiber optic strain monitoring of overhead contact line systems of trains, We used FBG (Fiber Bragg Grating) sensors to measure the strain variation of overhead contact line. FBG sensors can sensitively measure the variation of strain and! or temperature by the shift wavelength of reflected wave according to the lattice variation during the measurement. FBG sensor were attached on the contact line and connected to the monitoring system with optical fibers. The monitering system with FBG sensors showed very good sensitivity to measuring strain variation and this system could be applied to the overhead contact line of KTX (Korea Train eXpress).

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.705-712
• /
• 2009

The state changes of ocean covered over 70% of earth surface are one of the greatest factor of weather catastrophe. Recently weather extraordinary events are followed by steep increase of sea water temperature and scientists in various fields are studying and warning the weather changes. In this paper, floating buoy is developed to monitor ocean environments via Orbcomm satellite and a method is proposed to increase measurement accuracy of sea water temperature with common low price temperature sensor. Experimental results are presented to illustrate the usability and effectiveness of the developed system. A web-based real time monitoring system is built to monitor ocean environmental information such as sea and air temperature, salinity according to the position of buoy through the internet for user convenience.