• Journal of the Korean Society of Tobacco Science
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2013

Near InfraRed Spectroscopy(NIRS) is a quick and accurate analytical method to measure multiple components in tobacco manufacturing process. This study was carried out to develop calibration equation of near infrared spectroscopy for the prediction of the amount of chemical components and hot water solubles(HWS) of reconstituted tobacco leaf. Calibration samples of reconstituted tobacco leaf were collected from every lot produced during one year. The calibration equation was formulated as modified partial least square regression method (MPLS) by analyzing laboratory actual values and mathematically pre-treated spectra. The accuracy of the acquired equation was confirmed with the standard error of prediction(SEP) of chemical components in reconstituted tobacco leaf samples, indicated as coefficient of determination($R^2$) and prediction error of sample unacquainted, followed by the verification of model equation of laboratory actual values and these predicted results. As a result of monitoring, the standard error of prediction(SEP) were 0.25 % for total sugar, 0.03 % for nicotine, 0.03 % for chlorine, 0.16 % for nitrate, and 0.38 % for hot water solubles. The coefficient of determination($R^2$) were 0.98 for total sugar, 0.97 for nicotine, 0.96 for chlorine, 0.98 for nitrate and 0.92 for hot water solubles. Therefore, the NIRS calibration equation can be applicable and reliable for determination of chemical components of reconstituted tobacco leaf, and NIRS analytical method could be used as a rapid and accurate quality control method.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.1027-1033
• /
• 2009

For the assesment of pollutant loads, a monitoring has been conducted to identify hydrologic conditions and water quality of the Oenam watershed in Juam Lake, and the SWAT model integrated with GIS was applied to the watershed and evaluated for its applicability through calibration and verification using observed data. For the model application, digital maps were constructed for watershed boundary, land-use, soil series, digital elevation, and topographic input data of the Oenam watershed using Arcview. The observed runoff was 832.8 mm while the simulated runoff was 842.8 mm in 2003. The model results showed that the simulated runoff was in a good agreement with the observed data and indicated reasonable applicability of the model. In terms of nutrient load, the simulation results of T-N, T-P showed a similar trend to observed values. The observed T-N load was 10.8 kg/ha and the simulated T-N load was 7.6 kg/ha while the observed T-P load was 0.21 kg/ha and the simulated T-P load was 0.18 kg/ha. In general, SWAT model predicted observed runoff and loads of T-N and T-P after calibration with observed data in acceptable range. Overall, SWAT model was satisfactory in estimation of nutrient pollutant loads of the rural watershed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.444-454
• /
• 2004

To support diverse transmission requirements of multimedia applications, Quality of Service (QoS) should be provided in the Internet, where only the best-effort service is available. In this paper, we describe our recent effort on the implementation and verification of an extendable and flexible QoS allocation and resource management system based on the bandwidth broker model for realizing the IETF differentiated service (DiffServ). Focusing on the bandwidth issue over single administrative domain, the implemented system provides real-time resource reservation and allocation, delayed call admission control, simple QoS negotiation between sewer and users, and simple resource monitoring. The implemented system is verified by evaluating the performance of a resource-intensive application over the real-world testbed network.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.485-490
• /
• 2017

In this paper, we propose a technique for high speed removal of sea-fog using a graphic processor. This technique uses a host processor(CPU) and several graphics processors(GPU) capable of parallel processing to remove sea-fog from the input image. In the process of removing sea-fog, the dark channel extraction, the maximum brightness channel extraction, and the calculation of the transmission are performed by the host processor, and the process of refining the transmission by applying the bidirectional filter is performed in parallel through the graphic processor. To verify the proposed parallel processing method, three NVIDIA GTX 1070 GPUs were used to construct the verification environment. As a result, it takes about 140ms when implemented with one graphics processor, and 26ms when implemented using OpenMP and multiple GPGPUs. The proposed a parallel processing algorithm based on the graphics processor unit can be used for safe navigation, port control and monitoring system.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• Land and Housing Review
• /
• v.13 no.4
• /
• pp.105-114
• /
• 2022

Non-fire activated fire alarms caused by such actions as cigarette smoke, cooking, and high humidity are fire safety risk factors. In such instances, it is important to quickly locate and replace the actuated detector. However, it is difficult to locate those detectors because most do not have an address function. While new apartments can incorporate addressable fire alarm detectors, in existing apartments there are limitations in converting over to addressable detectors due to cost and power line issues. This study developed an efficient address function for fire alarms in existing apartments. The newly developed system consists of the existing receiver, and a proposed addressable repeater and detector. Utilizing an experimental setup, the performance of the proposed address monitoring system was confirmed to be stable and compatible with the receiver and existing detectors.

• Journal of The Korean Association of Information Education
• /
• v.25 no.3
• /
• pp.511-525
• /
• 2021

The purpose of this study is to develop a design guideline to provide user-friendly experience and convenience for the online support system for the curriculum at primary/secondary schools. To achieve the objective, best practices of overseas on the online support system for curriculum as well as prior research were analyzed. In addition, UX/UI usability problems and needs were derived through a survey of 74 professionals and teachers who are monitoring NCIC and high school credit system sites. Based on the analysis of best practices of overseas and survey results, the draft of the design guideline was derived, and Delphi method was conducted by experts to re- vise the design guidelines and evaluate their validity. This study is meaningful in that it suggests the direction of improvement of the system currently being serviced and the direction of the design of the system to be developed in the future, by providing design guidelines that can be generally applied to online support systems that perform tasks related to the curriculum.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.403-411
• /
• 2014

In this paper, an algorithm of extracting the features of home appliances and automatically building a database to identify home appliances is designed and presented. For the verification, a software library supporting this algorithm is implemented and added to an power management system server, which was already implemented to support real-time monitoring of home appliances' power consumption status and controlling their power. The implemented system consists of a system server and clients, each of which measures the power consumed by a home appliance plugged in it and transmits the information to the server in real-time over a wireless network. Through experiments, it is verified that it is possible to identify any home appliance connected to a specific client.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.134-141
• /
• 2020

Telemetry system is a communication system that measures and transmits various signals in the aircraft to the ground for collecting and monitoring flight data during the development of unmanned air vehicle and satellite launch vehicles. With the recent development of wireless communication technology, it is becoming important to apply encryption of telemetry system to prepare with security threats that may occur during flight data transmission. In this paper, we suggested and implemented the application method of ARIA-256, Korean standard encryption algorithm, to apply encryption to telemetry system. In consideration of the block error propagation and the telemetry frame characteristics, frame is encrypted using the CTR mode and can apply the Reed-solomon codes recommended by CCSDS. ARIA algorithm and cipher frame are implemented in FPGA, and simulation and hardware verification system confirmed continuous frames encryption.

• The Korean Journal of Community Living Science
• /
• v.15 no.2
• /
• pp.167-177
• /
• 2004

The number of foodborne salmonellosis was estimated by using microbial risk assessment(MRA) methodology and the possibility of application was studied through comparison with previous results. The contamination levels of Salmonella sp. were estimated by using published domestic studies(1997∼2000) and monitoring data (1999∼2001) from food-safety related institutes. Data on food consumption came from the 2001 National Health and Nutrition Survey, and dose-response models from studies in other countries. Simulation results showed that there were 753,368 cases of salmonellosis in Korea in 1 year, which is about 115 times that reported in previous years and lower than the WHO's estimation increase. From these results, microbial risk assessment is likely to be available for estimation of the number of foodborne illnesses and determination of the order of priority in food-safety management. Butthe verification methods are not established and most of the data on contamination levels of foodborne bacteria, food consumption, and dose-response relationships have not been established. In addition, the actual conditions of circulation, storage and cooking must be studied further.