• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.3
• /
• pp.113-117
• /
• 2021

The data gathering delay and the network lifetime are important indicators to measure the service quality of wireless sensor and actuator networks (WSANs). This study proposes a dynamically cluster head (CH) selection strategy and automatic scheduling scheme of collectors for prolonging the network lifetime and shorting data gathering delay in WSAN. First the monitoring region is equally divided into several subregions and each subregion dynamically selects a sensor node as CH. These can balance the energy consumption of sensor node thereby prolonging the network lifetime. Then a task allocation method based on genetic algorithm is proposed to uniformly assign tasks to actuators. Finally the trajectory of each actuator is optimized by ant colony optimization algorithm. Simulations are conducted to evaluate the effectiveness of the proposed method and the results show that the method performs better to extend network lifetime while also reducing data delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.250-255
• /
• 1993

In this paper, for detection and isolation of instrument and process faults related with steam generator(S/G) in nuclear power plant, two types of observers are designed based on the linearized dynamic model of S/G : a bank of Dedicated Observers (DOS) for instrument faults detection and a bank of Unknown Input Observers(UIO) for process faults detection. And then, they are combined to decide which one between the above two faults occurs. In principle, the failure in ith instrument(process) can be isolated by monitoring the error between the ith output and its estimation obtained from the ith DOS(UIO). It is shown via computer simulations that the present scheme is feasible in finding out the source of a fault.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.313-321
• /
• 2013

This paper describes the operation analysis results of a communication-based DC micro-grid using a hardware simulator developed in the lab. The developed hardware simulator is composed of distributed generation devices such as wind power, photovoltaic power and fuel cells, and energy storage devices such as super-capacitors and batteries. Whole system monitoring and control was implemented using a personal computer. The power management scheme was implemented in a main controller based on a TMS320F28335 chip. The main controller is connected with the local controller in each of the distributed generator and energy storage devices through the communication link based on a CAN or an IEC61850. The operation analysis results using the developed hardware simulator confirm the ability of the DC micro-grid to supply the electric power to end users.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.41-48
• /
• 2016

In mobile ad hoc networks(MANETs), all the nodes in a network have limited resources. Therefore, communication topology which has long lifetime is suitable for nodes in MANETs. And MANETs are exposed to various threats because of a new node which can join the network at any time. There are various researches on security problems in MANETs and many researches have tried to make efficient schemes for reducing network power consumption. Power consumption is necessary to secure networks, however too much power consumption can be critical to network lifetime. This paper focuses on energy efficient monitoring node distribution for enhancing network lifetime in MANETs. Since MANETs cannot use centralized infrastructure such as security systems of wired networks, we propose an efficient IDS node distribution scheme using minimum spanning tree (MST) method to cover all the nodes in a network and enhance the network lifetime. Simulation results show that the proposed algorithm has better performance in comparison with the existing algorithms.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.272-275
• /
• 2014

An improved fuzzy Kalman filtering speed estimation scheme was proposed by means of measuring stator side voltage and current value based on vector control state equation of induction motor. The designed fuzzy adaptive controller conducted recursive online correction of measurement noise covariance matrix by monitoring the ratio of theory residuals and actual residuals to make it approach real noise level gradually, allowing the filter to perform optimal estimation to improve estimation accuracy of EKF. Meanwhile, co-simulation scheme based on MATLAB and Ansoft was proposed in order to improve simulation accuracy. Field-circuit coupling problems of induction motor under the action of vector control were solved and the parameter optimization accuracy was improved dramatically. The simulation and experimental results show that this algorithm has a strong ability to inhibit the random measurement noise. It is able to estimate motor speed accurately, and has superior static and dynamic characteristics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.207-216
• /
• 2000

This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

• Journal of Veterinary Science
• /
• v.22 no.4
• /
• pp.48.1-48.15
• /
• 2021

Background: Porcine epidemic diarrhea virus (PEDV) is a swine enteropathogenic coronavirus that has devastated the swine industry in South Korea over the last 30 years. The lack of an effective method to control the endemics has led to a surge in PEDV recurrences in affected farms throughout the country. Objectives: In the first step toward establishing systematic monitoring of and active control measures over the swine populations, we constructed an assessment model that evaluates the status of (1) biosecurity, (2) herd immunity, and (3) virus circulation in each of the PEDV-infected farms. Methods: A total of 13 farrow-to-finish pig farms with a history of acute PEDV infection on Jeju Island were chosen for this study. The potential risk of the recurrence in these farms was estimated through on-site data collection and laboratory examination. Results: Overall, the data indicated that a considerable number of the PEDV-infected farms had lax biosecurity, achieved incomplete protective immunity in the sows despite multi-dose vaccination, and served as incubators of the circulating virus; thus, they face an increased risk of recurrent outbreaks. Intriguingly, our results suggest that after an outbreak, a farm requires proactive tasks, including reinforcing biosecurity, conducting serological and virus monitoring to check the sows' immunity and to identify the animals exposed to PEDV, and improving the vaccination scheme and disinfection practices if needed. Conclusions: The present study highlights the significance of coordinated PEDV management in infected farms to reduce the risk of recurrence and further contribute towards the national eradication of PEDV.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.135-145
• /
• 2002

Active networks represent a new approach to network architecture. Nodes(routers, switches, etc.) can perform computations on user data, while packets can carry programs to be executed on nodes and potentially change the state of them. While active networks provide a flexible network iufrastructure, they are more complex than traditional networks and raise considerable security problems. Nodes are Public resources and are essential to the proper and contract running of many important systems. Therefore, security requirements placed upon the computational environment where the code of packets will be executed must be very strict. Trends of research for active network security are divided into two categories: securing active nodes and securing active packets. For example, packet authentication or monitoring/control methods are for securing active node, but some cryptographic techniques are for the latter. This paper is for transferring active packets securely between active nodes. We propose a new method that can transfer active packets to neighboring active nodes securely, and execute executable code included in those packets in each active node. We use both public key cryptosystem and symmetric key cryptosystem in our scheme

• Journal of the Korea Computer Industry Society
• /
• v.5 no.2
• /
• pp.281-292
• /
• 2004

As the logistic environment of digital contents is rapidly changing, the protection of the digital rights for digital content has been recognized as one of critical Issues. Digital Right Management(DRM) has taken much interest Internet Service Provider(ISP), authors and publishers of digital content as an interested approach to create a trusted environment for access and use of digital resources. This paper propose an interested digital rights protection scheme using license agent to address problems facing contemporary DRM approached : static digital rights management, and limited application to on-line environment. We introduce a dynamic mission control technology to realize dynamic digital rights management. And we incorporate license agent to on- and off-line monitoring and tracking. The proposed system prevent illegal access and use by using PKI security method, real time action monitoring for user, data security for itself.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1038-1046
• /
• 2017

In this paper, we propose the design of LED Streetlight Platform with capabilities of weather monitoring and color temperature control. Several previous works are focused on the energy efficiency or data management of streetlight system, but no work has been done on the lighting performance, especially when natural phenomenon such as fog or haze appears on the street and obstructs the visibility of drivers and pedestrians. To solve such issue, we propose the use of two LED lamps with different correlated color temperature, which will be activated interchangeably according to the condition on the street. We also present the design of communication scheme between each devices in the system. Moreover, our experimental results show the LED Streetlight Platform can perform well and the data can be displayed properly at the website.