• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.61-61
• /
• 2003

과학위성 1호는 2003년 9월 26일 러시아 플레세츠크 발사장에서 발사되었다. 고도 690Km 상공에서 원형궤도를 그리며 우주에서의 임무수행을 시작했다. 과학위성 1호의 1차 전지는 태양으로부터 생산된 전기에너지를 사용하며, 2차 전지는 NiCd Battery를 사용한다. 이와 같이 1차 전지와 2차 전지를 최적의 상태로 제어하여 위성의 전력공급시스템으로써의 역할을 수행하게 될 과학위성 1호 전력시스템은 크게 Solar Power Regulator(SPR), Power Supply Unit(PSU), Power Distribution Unit(PDU), 및 Battery Cell Monitor / Pyrotechnic Device Support Equipment(BM/PDSE)로 구성 되어있다. 따라서, 본 논문에서는 과학위성 1호의 전력공급을 담당하는 System Unit 별 기능, 신호흐름, 전력분배 원칙 등에 대하여 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2690-2692
• /
• 2005

CAN communication can minimize the interfacing lines between equipments because it is composed of only the input and output lines, also is used for automatic system including vehicle, aircraft, railway vehicles and robot because the reliability of data is high by the capability of data-related error detect and correcting function. It can also improve the low-reliable and inefficient system which is composed of the existing Wiring Harness(W/H), so in case of vehicle, it is used in place of the present ECU as the new electro-control unit. In this paper, we constructed the electro-control unit of vehicle by using CAN communication and implemented system that could monitor the condition of vehicle through the web or mobile by connecting the electro-control unit to imbedded system. Such a system is expected to be helpful to the intelligent vehicle and the adoption of ACC(Adaptive Cruise Control).

• Current Optics and Photonics
• /
• 제4권3호
• /
• pp.186-192
• /
• 2020

This paper describes a real-time monitoring system in Ethernet passive optical networks (EPON) that uses burst-mode fiber Bragg grating (FBG) optical sensors. The FBG interrogation unit in the optical line terminal (OLT) transmits the monitoring wavelength to optical network units (ONUs). The FBG sensor unit in each ONU returns a burst-mode monitoring signal to the OLT. As the system applies time division multiple access (TDMA), a uniform Bragg wavelength can be used to monitor the EPON system. The FBG interrogation unit analyzes the received burst-mode monitoring signals and outputs fault information on the ONU branches in EPON. The simulation results show the effectiveness of the proposed monitoring system based on TDMA. In addition, we compared the proposed TDMA-based monitoring system with a WDMA-based monitoring system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.471-472
• /
• 2005

본 연구는 TFT-LCD의 배경광원인 Backlight Unit(BLU)의 구조를 광학 시뮬레이션을 통하여 분석함으로써 BLU에서의 광효율을 극대화하는데 초점을 두었다. 일반적으로 LCD Monitor BLU는 형광램프, 반사시트, 램프 리플렉터, 도광판, 광학시트로 구성된다 여기에서는 20.1 인치 6램프로 구성된 Monitor용 Side Type BLU에 대하여 램프 리플렉터의 형상, 램프 리플렉터의 내부 공간 변화와 그에 따른 램프의 위치, 램프사이의 배열에 따른 램프에서 도광판으로의 입사광량을 광학 시뮬레이션을 통하여 분석하였다. 위 시뮬레이션의 결과, 램프리플렉터가 'ㄷ' 형상일 때, 램프리플렉터 내부공간의 약 1:2 되는 지점에 램프가 위치하고 Center Lamp가 도광판에 최대한 가깝게 위치할 때 입사광량이 최대가 되어 BLU에서의 광효율이 향상됨을 알 수 있었다.

• 센서학회지
• /
• 제15권1호
• /
• pp.40-46
• /
• 2006

This paper presents a novel fiber optic accelerometer system for monitoring vibration of large-size structures. The system is composed of one (or multiple) sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy cabling, and low cost. In this paper, a prototype of the fiber optic accelerometer system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. A unique algorithm has also been developed to derive the sensor's acceleration from the raw signals of the light control unit; it is implemented via a separate signal processing unit. Finally, the shaking table tests successfully demonstrate the performance and the potential of the moire fringe fiber optic sensor system to monitor the health of civil infrastructures.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.485-491
• /
• 2015

This paper shows the design improvement and test model of FAU (Frequency Analysis Unit) in PDD (Partial Discharge Diagnosis system) for 800kV GIS (Gas Insulated Switchgear). We found some problems during operation of previous FAU, such as the aging of fiber-optic converter that can cause communication error, the malfunction of signal analysis circuit etc. And then we solved those problems by design improvement and verified the performance through type test. To monitor partial discharge, the performance of UHF sensor is important but the performance of frequency analysis unit is also very important. So we solved communication error, the malfunction of signal analysis circuit and then increased the operation reliability of FAU by improving fiber-optic converter and signal analysis circuit. Accredited testing laboratory carried out the performance verification test according to performance test criteria and procedure of reliability test standards, IEC-60225, 61000 and 60068 etc. We confirmed the test results which correspond with the performance test criteria.

• Journal of Astronomy and Space Sciences
• /
• 제32권4호
• /
• pp.281-287
• /
• 2015

Two mini neutron monitors are installed at Concordia research station (Dome C, Central Antarctica, $75^{\circ}06^{\prime}S$, $123^{\circ}23^{\prime}E$, 3,233 m.a.s.l.). The site has unique properties ideal for cosmic ray measurements, especially for the detection of solar energetic particles: very low cutoff rigidity < 0.01 GV, high elevation and poleward asymptotic acceptance cones pointing to geographical latitudes > $75^{\circ}S$. The instruments consist of a standard neutron monitor and a "bare" (lead-free) neutron monitor. The instrument operation started in mid-January 2015. The barometric correction coefficients were computed for the period from 1 February to 31 July 2015. Several interesting events, including two notable Forbush decreases on 17 March 2015 and 22 June 2015, and a solar particle event of 29 October 2015 were registered. The data sets are available at cosmicrays.oulu.fi and nmdb.eu.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.397-406
• /
• 2009

This study was conducted to monitor the floc sizes forming in the mixing zone in the water treatment plant. The dosing amount of poly aluminium chloride(PAC) was determined by particle dispersion analyzer(iPDA) in the lab and field scale test. During a field test period, PAC coagulant was used and the raw water was taken from Nakdong river. PAC wad diluted to activate the coagulant, leading to bring the more homogeneous dispersion in the shorter time. To monitor the floc sizes, the unit of floc size index(FSI) was used. With increasing of raw water turbidity, FSI value was increased. Also, the increased dosing amount of PAC brought the increased FSI and with overdosing of coagulant was in turn decreased. When the PAC was fed into the raw water after dilution in a field scale test, the width of FSI was narrower compared with the feeding of the mother liquor of PAC, implying that the formed flocs are denser and more uniform sizes. The width of FSI in average was varied on depending on the basicity of coagulant. Also, dF value, fractal dimension was evalued with the different coagulants, showing from 2.01 to 2.03. On-line floc monitor was effective for the optimal dosing in the drinking water plant.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.113-117
• /
• 2004

Such social structures as bridges, buildings, dams and towers have been transformed by their own load or fundamental ground. They have been behaved by other external causes. These regular or irregular behaviors threaten to do their users safety. Therefore, to monitor the load of the structures or reaction shown by them could help to verify their behaviors. RTK GPS allows the use of a static base station and remote rover unit to allow for data collection within several seconds and in real time. It is useful for monitoring the behaviors of massive structures like bridges. In this Study, Among GPS methods, we used RTK GPS to analyze the precision of monitoring and then on the basis of it, we developed a monitoring system using RTK GPS when measured the behavior of main tower of a suspension bridge by using RTK GPS. Comparing a deviation between observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. It turned out that it was possible to monitor and measure structures by RTK GPS.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.79.2-79.2
• /
• 2010

FCEV(Fuel Cell Electric Vehicle)는 연료전지스택의 각 셀에서 반응하는 화학에너지를 전기에너지로 변환하여 차량을 구동하는 시스템이다. 이러한 연료전지 셀이 정상적인 발전이 되지 않을 경우 비정상적인 전압이 발전되고 이것을 방치한다면 연료전지 스택의 영구적인 고장을 야기할 수 있다. 이를 방지하기 위해 SVM(Stack Voltage monitor) 제어기는 각 셀의 전압을 측정하고 그 정보를 상위 제어기인 FCU(Fuel cell Control Unit)에 전달한다. 이에 FCU는 연료전지스택의 고장을 운전자에게 알리고 연료전지스택의 발전을 멈추게 한다. 기존에 SVM 제어기는 각 셀마다 분압저항을 통하여 측정하며 이 전압의 차를 이용하여 셀 전압을 계산하는 방식이었다. 이는 상위 셀로 갈수록 오차가 커지는 문제가 있고 다수의 CPU 및 DC/DC 컨버터가 적용이 필요하여 복잡한 구성과 가격이 높은 문제가 있었다. 이러한 문제점을 해결하기 위하여 cell monitoring IC를 적용하였고 좀 더 정밀한 측정과 간단한 인터페이스를 구성할 수 있었다. 본 연구에서는 기존 SVM 제어기보다 안정되고 정밀한 SVM 제어기의 개발에 대해 기술하였다.