• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.601-605
• /
• 2007

This paper describes the experimental method to monitor the structural integrity. The crack on structures changes the wave propagation characteristics of structures. To monitor this change, frequency dependent variation of dynamic stiffness of beam structures is obtained by using beam transfer function method, and its trends are compared to undamaged one for identifying the location and size of the crack. Piezoelectric actuators were used to generate flexural vibrations. It eliminated various restrictions of continuously measuring wave propagation characteristics and monitoring structural integrity. The structural integrity was identified with minimal number of measurements and smart structures employing PZT actuations.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.80-86
• /
• 1997

In this paper, a temperature controller with monitor function is proposed for the electric furnace system. This controller includes holding and ramp control function, and the control program for the temperature process monitor of the electric furnace. For this purpose, the implementation and performance of auto tuning algorithms in a computer-based controller was studied in relation to the control of nonlinear electric furnace system which is characterized with large delay time. The control program for this controller programmed by c-language. To communicate a control and detection signals, between the controller and the electric furnace is implemented by the I/O data card. We apply the temperature controller to the practical electric furnace. As a result, the proposed controller shows the better status characteristic.

• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.263-272
• /
• 1997

A Radiation Alarm Monitor has been developed and manufactured in order to protect radiation workers from over-exposure. A visual and audible alarm system has been attached to initiate evacuation when accident occurs such as an unexpected change of radiation level or an over-exposure. The Radiation Alarm Monitor installed with microprocessor can record the information of radiation field change between 90 min. before the alarm and 30 min. after the alarm and also provide the data to an IBM compatible computer to analyze the accidents and to set a counterplan. It features a wide detection range of radiation field(10 mR/h-100 R/h), radiation field data storage, portability, high precision (${\pm}5%$) due to self-calibration function, and adaption of a powerful alarm system. According to ANSI N42.17A, the most stringent test standards, performance tests were carried out under various conditions of temperature, humidity, vibration, and electromagnetic wave hindrance at Korea Research Institute of Standards & Science (KRISS). As a result, the Radiation Alarm Monitor passed all tests.

• Research in Mathematical Education
• /
• v.6 no.1
• /
• pp.97-106
• /
• 2002

Educators have found that the concept of randomness is often misunderstood by students. Chance recently pointed out that students should be introduced to the concept of randomness through the use of simulations. In this article, we studied various aspects of the probability distribution off linear random path in a circle and introduce some related simulations to guide student exploration and discovery. Consider a random line segment that crosses a circle with a certain radius. Perhaps it can be considered to be a path that an airplane shows up and flies into a random direction in a monitor. What is the expected amount of flying distance through the monitor, and the expected variation\ulcorner Are we monitoring what we see scientifically\ulcorner This article studies the probability distribution and some related aspects of a linear random path within a circular monitor. Some simulative activity is also introduced which can be used in a statistics or probability classes.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.80-89
• /
• 2005

In this paper, time-frequency analysis using wavelet packet transform and advanced-MDSA (Multiple Dimensional Spectral Analysis) which based on wavelet packet transform is applied fur fault source identification and diagnosis of early detection of fault non-stationary sound/vibration signals. This method is analyzing the signal in the plane of instantaneous time and instantaneous frequency. The results of ordinary coherence function, which obtained by wavelet packet analysis, showed the possibility of early fault detection by analysis at the instantaneous time. So, by checking the coherence function trend, it is possible to detect which signal contains the major fault signal and to know how much the system is damaged. Finally, It is impossible to monitor the system is damaged or undamaged by using conventional method, because crest factor is almost constant under the range of magnitude of fault signal as its approach to normal signal. However instantaneous coherence function showed that a little change of fault signal is possible to monitor the system condition. And it is possible to predict the maintenance time by condition based maintenance for any stationary or non-stationary signals.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.63-70
• /
• 2005

We propose a method for evaluating the image quality of color liquid crystal display(LCD) monitors by using the polychromatic modulation transfer function(PMTF), which is calculated from the modulation transfer function(MTF) weighted by the overall color response of the system including the test LCD monitor. We confirm that experimental results using the PMTF agree well with simulated results of the PMTF of a color LCD monitor by using three bar targets with different amplitudes and three elementary colors such as red(R), green(G), and blue(B). As a results, we should choose the PMTF instead of the white color MTF or monochromatic MTF in order to evaluate correctly the image quality of color LCD monitors.

• 월간산업보건
• /
• s.142
• /
• pp.29-36
• /
• 2000

중장년자에서는 생활습관에 의한 질병이 대부분인 바 그 주요 원인인 생활습관은 산소소모가 공통적인데도 불구하고 이를 근거로 한 기능관리는 건강관리 측면에서 취급된 바 없다. 띠리사 기능관리에 의한 건강관리의 예로써 생활습관의 평가와 고나리에 있어서의 기상계 호흡기능검사의 역할을 소개하고 기능관리에 의한 건강관리, 건강상태를 이용한 건강관리, 일반호흡기능검사의 의의와 한계, 새로 개발된 기상계 호흡기능검사 지표의 의의, 건강정도로 본 건강관리를 소개하고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.313-322
• /
• 2005

In this paper, we implement and verify performance monitor for parallel signal processing system, using DSP Starter Kit(DSK) of which the basic Processor is TMS302C6711 chip. The key ideas of this performance monitor is, using Real Time Data Exchange(RTDX) for the Purpose of real-time data transfer and function of DSP/BIOS, the ability to measure the Performance measure like DSP workload, memory usage, and bridge traffic. In the simulation, FFT, 2D FFT, Matrix Multiplication, and Fir Filter, which are widely used DSP algorithms, have been employed. Using performance monitor and Code Composer Studio from Texas Instrument(Tl) , the result has been recorded according to different frequencies, data sizes, and buffer sizes for a single wave file. The accuracy of our performance monitor has been verified by comparing those recorded results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.328-333
• /
• 2012

Current differential GPS (DGPS) system consists of reference station (RS), integrity monitor (IM), and control station (CS). The RS computes the pseudorange corrections (PRC) and generates the RTCM messages for broadcasting. The IM receives the corrections from the RS broadcasting and verifies that the information is within tolerance. The CS performs realtime system status monitoring and control of the functional and performance parameters. The primary function of a DGPS integrity monitor is to verify the correction information and transmit feedback messages to the reference station. However, the current algorithms for integrity monitoring have the limitations of integrity monitor functions for satellite outage or anomalies. Therefore, this paper focuses on the detection and identification methods of satellite anomalies for maritime DGPS RSIM. Based on the function analysis of current DGPS RSIM, it first addresses the limitation of integrity monitoring functions for DGPS RSIM, and then proposes the detection and identification method of satellite anomalies. In addition, it simulates an actual GPS clock anomaly case using a GPS simulator to analyze the limitations of the integrity monitoring function. It presents the brief test results using the proposed methods for detection and identification of satellite anomalies.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.81-90
• /
• 1999

This paper describes an EEG(electroencephalogram) software for two-channel cerebral function monitoring system to detect the cerebral ischemia. In the software, two-channel bipolar analog EEG signals are digitized and from the signals various EEG parameters are extracted and displayed on a monitor in real-time. Digitized EEG signal is transformed by FFT(Fast Fourier transform) and represented as CSA(compressed spectral array) and DSA(density spectral array). Additional 5 parameters, such as alpha ratio, percent delta, spectral edge frequency, total power, and difference in total power, are estimated using the FFT spectra. All of these are effectively merged in a monitor and displayed in real-time. Through animal experiments and clinical trials on men, the software is modified and enhanced. Since the software provides raw EEG, CSA, DSA, simultaneously with additional 5 parameters in a monitor, it is possible to observe patients multilaterally. For easy comparison of patient's status, reference patterns of CSA, DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation and patient's conditions on the software, this allow him jump to the points of events directly, when reviewing the recorded EEG file afterwards. Other functions, such as forward/backward jump, gain control, file management are equipped and these are operated by simple mouse click. Clinical tests in a university hospital show that the software responds accurately according to the conditions of patients and medical doctors can use the software easily.