• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.256-262
• /
• 1994

$200{\AA}$ thick Co/Pd multilayered thin films were fabricated by sputtering. Two thicknesses of cobalt sublayer, $2{\AA}$ and $4{\AA}$ were chosen and the effects of sputtering pressure on the perpendicular magnetic anisotropy were investigated. It has been found that the optimum pressure for maximum perpendicular magnetic anisotropy(PMA) existed and the pressure for maximum PMA was lower for the multilayer with $2{\AA}$ cobalt layer than that with $4{\AA}$ cobalt thickness. As the sputtering gas presssure increased, domain wall motion with magnetization became difficult and the predominant mode of magnetization reversal changed from domain wall motion to magnetic moment rotation. It turned out that the perpendicular magnetic anisotropy was higher in case of $2{\AA}$ cobalt thickness than $4{\AA}$ cobait thickness.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.503-512
• /
• 2020

The products using blowers include hand dryers, automatic car washers, dryers, and vacuum cleaners. The features of these products require a structure and control algorithm so that a strong wind is blown out at the moment. Electric motors according to the existing excitation method include a direct winding type, a decentralized type, a lottery type, and a permanent magnet type. Conventional electric motors have a disadvantage when the starting current is large during high-speed rotation and the number of rotations is irregular. In order to improve this, research on high-speed BLDC motor control has designed 800W-class high-speed BLDC motor control and circuit through driving circuit design, sensorless control algorithm, simulation, experiment, etc., and more than 95% high efficiency evaluation method of driving performance of controller, prototype experiments and verification were studied.

• Structural Engineering and Mechanics
• /
• v.61 no.5
• /
• pp.645-655
• /
• 2017

To determine the seismic applicability of a long-span railway concrete upper-deck arch bridge with concrete-filled steel-tube (CFST) rigid skeleton ribs, some fundamental principles and seismic approaches for long-span bridges are investigated to update the design methods in the current Code for Seismic Design of Railway Engineering of China. Ductile and mixed isolation design are investigated respectively to compare the structural seismic performances. The flexural moment and plastic rotation demands and capacities are quantified to assess the seismic status of the ductile components. A kind of triple friction pendulum (TFP) system and lead-plug rubber bearing are applied simultaneously to regularize the structural seismic demands. The numerical analysis shows that the current ductile layout with continuous rigid frame approaching spans should be strengthened to satisfy the demands of rare earthquakes. However, the mixed isolation design embodies excellent seismic performances for the continuous girder approaching span of this railway arch bridge.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.1-6
• /
• 2017

Modern society has been experiencing by population growth and urbanization that bring, a change of eating habits which has occurred a various types of waste in a large amount. Even though these wastes are required an immediate treatment with difficulties unsanitary handling and existing waste treatment method are by incineration, fermentation, drying and etc. however a bad smell occurs after the treatment that need's a lot of energy in processing organic wastes with high moisture contents and wasteful and inefficient problem. The strength assessment of the organic waste agitating vessel is required in terms of safety due to the differences of loading on the shaft that was treated by agitating the mixture of food waste. The damage of agitating axis is depended on steam pressure, temperature condition and the force moment that exerted by the food waste. Thus the strength assessment and stability evaluation are very important, especially to handle a hard waste. In this study the rotation capacity of agitation is about 5 tons considering general structural rolled steel pressure vessel strength and steam pressure. The purpose is to estimate the safety and strength evaluation for a agitator axis and impellers according to the rotating angle of the axis under the condition of the 3.2 ton capacity reactor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.879-884
• /
• 2002

There are screw, reciprocating and turbo compressor by structure in an air compressor, essential equipment on he industrial spot. Resently it is wide that the range of turbo compressor's use in gradual, turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently the study of turbo compressor applied super high speed motor and drive, removing gearbox made its size small and mechanical friction loss minimum. In this study we tried to develope variable super high speed motor drive systems for 150Hp, 70,000rpm drect drive Turbo compressor. The result of study is applied to a 150Hp direct turbo compressor and makes it goods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.885-890
• /
• 2002

Turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently the study of turbo compressor applied super high speed motor and drive, removing gearbox made its size small and mechanical friction loss minimum. In this study we tried to develope variable super high speed motor controller, compressor controller and MMI controller under one DSP based systems for 1500Hp, 70,000rpm direct drive Turbo compressor. It have to do unitification of each controller"s hardware and software. The result of study is applied to a 150Hp direct turbo compressor and makes it goods.oods.

• Journal of Broadcast Engineering
• /
• v.2 no.1
• /
• pp.74-83
• /
• 1997

We have proposed a composite feature measure which combines the color and shape features of an image for image retrieval. We improved the performance of retrieval based on the efficient color quantization using the Lloyd-Max quanizer and on the Histogram matrix matching method which considers the spatial correlation of quantized color group. We also supplemented the color information using shape information with the Improved Moment Invarlants. We have tested our technique on Image database consisting of 200 actual trademark images. Our experimental results showed that our approach improved the performance compared to the previous method under the various situations such as rotation images, translation images, noise added images, gamma corrected images and so on. The efficiency of retrieval is found to be very high and experimental results are

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.715-723
• /
• 2001

This paper represents the behavior of CFT column to H-beam full-scale connection with external T-stiffener. 6 specimens whose T-stiffeners which are compounded of vertical element and horizontal element were made under the parameter of the strength ratio of each elements(vertical element and horizontal element in T-stiffener) to the beam full plastic moment. The analysis-parameters demonstrated in the base of the data that we get in experiment are strength stiffness, and plastic rotational capacity. All of specimen showed stable hysteretic behavior, and the horizontal element is more critical than vertical element in strength and stiffness. The mean beam plastic rotation of all specimen except the TS-2 specimen is 2.97% rad.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.669-675
• /
• 2011

A constant hanger is a device for supporting pipes in plants. It supplies a constant force to a supporting pipe even if the pipe moves because of thermal expansion. In this paper, we propose a method for designing the contour of a cam for a constant hanger. It has been shown that the contour of a cam must satisfy the geometrical relation of the cam, the force balance equation for the load tube, the relation between the side spring compression and the cam rotation angle, and the moment balance equation for the cam. A calculation procedure to solve these equations simultaneously is proposed, and a constant hanger is designed successfully.

• Steel and Composite Structures
• /
• v.5 no.6
• /
• pp.485-513
• /
• 2005

This paper presents a state-of-the-art on the behaviour of steel joints under fire loading and some recent developments in this field, currently being carried out by the authors. Firstly, a review of the experimental research work on steel joints is presented, subdivided into isolated member tests, sub-structure tests and tests on complete building structures. Special emphasis is placed on the seventh Cardington test, carried out by the authors within a collaborative research project led by the Czech Technical University in Prague. Secondly, a brief review of various temperature distributions within a joint is presented, followed by a discussion of the behaviour of isolated joints at elevated temperature, focussing on failure modes and analytical procedures for predicting the moment-rotation behaviour of joints at elevated temperature. Finally, a description of the coupled behaviour of joints as part of complete structures is presented, describing previous work and investigations on real fire (including heating and cooling phases) currently being carried out by the authors.