• The Journal of Korean Physical Therapy
• /
• v.11 no.1
• /
• pp.55-61
• /
• 1999

The purpose of this study was to compare the moment and power of affected Side and those of unaffected side during gait in hemiplegic patients after stroke. Force plate ana kinetic gait analysis was used. The following is resulted from this study. 1. In the hip joint, moment values had not difference between affected side and unaffected side. Power values had difference between affected and unafected side. 2. In the knee joint, moment values and power values had difference between affected side and unaffected side. 3. In the ankle feint, moment and power values had not, difference between affected side and unaffected side.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.189-196
• /
• 2011

The purpose of this study was to verify the difference in biomechanical variation and pattern of the lower limb between planned and unexpected termination, which is related to the prevention of fatal fall in the elderly. Therefore, selected twenty subjects for each group which composed of females(age: $73.5{\pm}4.63$ year, height: $153.2{\pm}6.46$ cm, body mass: $58.98{\pm}5.82$ kg) and women(age: $23.4{\pm}2.5$ year, height: $164.65{\pm}3.9$ cm, body mass: $58.47{\pm}5.53$ kg) in their twenties. As a result, lower limb's extension moment and power were increased significantly in statistics(p<.05). Also, knee joint power showed instant changes from concentric contraction to eccentric contraction and hip joint power from eccentric contraction to concentric contraction. During unexpected termination there were dramatical increase in eccentric contraction and power(p<.05). In both planned and unexpected termination, ankle joint moment were higher in young group, but the moment of the hip joint were higher in the elderly group(p<.05). In contrast to younger group, there were no changes in knee extension moment in elderly group(p<.05). but showed relatively higher hip joint extension moment and power(p<.05).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.697-700
• /
• 2006

저수시 하천유량(Low Streamflow)의 추정은 하천의 수질관리, 용수공급계획, 댐 방류계획등의 수자원관리에 있어서 매우 중요한 부분이다. 이러한 중요성에 따라 Vogel과 Kroll (1989)은 저수시 하천유량을 추정하기 위한 여러 가지 확률분포함수를 제안하였다. 가장 흔히 제안되어지는 이변수 확률분포(Two-Parameter Distribution)로는 Lognormal 분포와 Weibull 분포가 있으며 이와 더불어 Three-Parameter Lognormal, Three-Parameter Weibull, Log Person Type Ⅲ 분포도 널리 사용되어진다. 그러나 이러한 여러 가지 확률 분포함수 중에서 가장 적절한 확률분포의 선택은 저수시 하천유량의 물리적인 측면과는 상관없이 주로 적합도(Gooness of Fit)에 기인된 통계치에 의해서만 결정되기도 하는데 이러한 경우 잘못된 가정을 받아들이는 확률이 높아짐에 따라 추정결과의 신뢰성(Reliability)을 감소시킬 수 있다. 이러한 문제점을 극복하기 위해서 Onoz와 Bayazit (2001)는 Recession Curve를 지수함수로 가정하고 최대 갈수 기간의 길이(Maximum Dry Period Length)의 확률에 대한 이론적인 결과치들을 사용하여 Weibull 분포의 특정한 경우에 해당되어지는 Power 분포를 유도하였으며 유도된 Power 분포의 매개변수를 추정하기 위하여 L-Moment 방법을 사용하였다. 또한 Onoz와 Bayazit (2001) 작은 유출량에서 확률분포와 잘 맞지 않는 경우 작은 유출량값에 작은 가중치를 부여하여 확률분포에 대한 영향을 줄이는 방법인 LL-Moment 방법을 제안하였다. 본 연구에서는 낙동강 유역의 1번부터 5번 소유역에 대해 SSARR 모형을 이용하여 모의한 유출량을 이용하여 Weibull 분포, L-Moment방법에 의해 추정된 매개변수를 사용한 Power 분포, LL-Moment 방법에 의해 추정된 매개변수를 사용한 Power 분포를 적용하였으며 이들 분포의 적합도를 PPCC Test를 사용하여 평가해봄으로써 낙동강 유역에서의 저수시의 유출량 추정에 대한 Power 분포의 적용성을 판단해 보았다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.135-138
• /
• 2000

This paper presents design for radiation element of slotted waveguide by the method of moment. The piecewise sinusoidal function as the basis function is used for the Moment Method. From the analytically results based on the Galerkin's moment method, frequency characteristics and radiation power is investigated for the design parameter such as the slot length, offset and angle. This paper also discusses that the radiation power is controled by the slot offset and angle. The thickness of the waveguide wall is also discusses in the analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.107-118
• /
• 2008

In this study, lower extremity joint kinematics and kinetics and lumbar lordosis were investigated for two different symmetrical lifting techniques(squat and stoop) using the three-dimensional motion analysis. Twenty-six male volunteers lifted boxes weighing 5, 10 and 15kg by both squat and stoop lifting techniques. There were not significant differences in maximum lumbar joint moments between the two techniques. The hip and ankle contributed the most part of the support moments during squat lifting, and the knee flexion moment played an important role in stoop lifting. The hip, ankle and lumbar joints generated power and only the khee joint absorbed power in the squat lifting. The knee and ankle joints absorbed power, the hip and lumbar joints generated power in the stoop lifting. The bi-articular antagonist muscles' co-contraction around the knee joint during the squat lifting and the eccentric co-contraction of the gastrocnemius and semitendinosus were found to be important for straightening up during the stoop lifting. At the time of lordotic curvature appearance in the squat lifting, there were significant correlations in all three lower extremity joint moments with the lumbar joint. Differently, only the hip moment had significant correlation with the lumbar joint in the stoop lifting. In conclusion, the knee extension which is prominent kinematics during the squat tilling was produced by the contributions of the kinetic factors from the hip and ankle joints(extensor moment and power generation) and the lumbar extension which is prominent kinematics during the stoop lifting could be produced by the contributions of the knee joint kinetic factors(flexor moment, power absorption, bi-articular muscle function).

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.407-412
• /
• 2016

Objective: The aim of this study was to analyze the net joint moment and joint power of the lower extremity during squat in female patients with genu varum. Method: Eight female patients with genu varum were asked to do regular squats, and their net joint moment and joint power were compared to those of another eight female participants with straight legs. Their video recordings and ground reaction force data were analyzed to be used as a theoretical evidence of squatting effectively for female patients with genu varum. Results: Squats had a higher impact on internal knee joint rotation and ankle joint flexion moments in the genu varum group than in the straight leg group due to their weak and short hip joint muscles. Conclusion: There is a need to develop a squat movement that is appropriate for women with genu varum in order to distribute overload efficiently among the hip, knee, and ankle joints and to strengthen the muscles in a balanced way.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.40-50
• /
• 2016

In order to recover the power system during the wide power outage or power failure in the power plant, black start system should be properly operated without any problem. Especially power for black start in the geographically isolated areas of electric island is supplied from small emergency start-up generator, and loads are aux systems of gas turbines such as SFC(Static frequency converter). This paper introduces the international practices to overcome the voltage drop problem with harmonics of the system having the DC output such as SFC during black start in weak feed system and analyzes the relationship between house load inputs and harmonics. By varying the house load and input of power supply, this paper identified boundaries between weak feed and strong feed power. In order to verify the theory of stable condition in weak feed power system with DC output, house load is simulated using ETAP. Additionally MATLAB was used for harmonic analysis between the load inertia moment and non load inertia moment.

• Structural Engineering and Mechanics
• /
• v.12 no.2
• /
• pp.201-214
• /
• 2001

Four finite element (FE) models are examined to find the one that best estimates moment-rotation characteristics of top- and seat-angle with double web-angle connections. To efficiently simulate the real behavior of connections, finite element analyses are performed with following considerations: 1) all components of connection (beam, column, angles and bolts) are discretized by eight-node solid elements; 2) shapes of bolt shank, head, and nut are precisely taken into account in modeling; and 3) contact surface algorithm is applied as boundary condition. To improve accuracy in predicting moment-rotation behavior of a connection, bolt pretension is introduced before the corresponding connection moment being surcharged. The experimental results are used to investigate the applicability of FE method and to check the performance of three-parameter power model by making comparison among their moment-rotation behaviors and by assessment of deformation and stress distribution patterns at the final stage of loading. This research exposes two important features: (1) the FE method has tremendous potential for connection modeling for both monotonic and cyclic loading; and (2) the power model is able to predict moment-rotation characteristics of semi-rigid connections with acceptable accuracy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.259-267
• /
• 2009

Generalized Extreme Value (GEV) distribution is recommended for flood frequency and extreme rainfall distribution in many country. L-moment method is the most common estimation procedure for the GEV distribution. In this study, the relationships between the cross-site correlations between extreme events and the cross-correlation of estimators of L-moment ratios (L-moment Coefficient of Variation (L-CV) and L-moment Coefficient of Skewness (L-CS)) for data generated from GEV distribution were derived by Monte Carlo simulation. Those relationships were fit to the simple power function. In this Monte Carlo simulation, GEV+ distribution were employed wherein unrealistic negative values were excluded. The simple power models provide accurate description of the relationships between cross-correlation of data and cross-correlation of L-moment ratios. Estimated parameters and accuracies of the power functions were reported for different GEV distribution parameters combinations. Moreover, this study provided a description about regional regression approach using Generalized Least Square (GLS) regression method which require the cross-site correlation among L-moment estimators. The relationships derived in this study allow regional GLS regression analyses of both L-CV and L-CS estimators that correctly incorporate the cross-correlation among GEV L-moment estimators.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.187-196
• /
• 2007

The purpose of this study was to find the most effective movement pattern from three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion task, which had the time constraint to complete the performance. 7 healthy subjects participated in left and right side movement task by an external signal, which required the subject to perform the task as fast as possible. Mechanical output and joint kinetics focusing on the lower extremities were analyzed. The results were as follows. In spite of the shortest duration in propulsive phase, the hopping condition showed no difference with other conditions in the work output done and take-off velocity. It resulted from the greatest power output generated during the propulsive phase. A significant difference was found for joint moment and joint power according to the movement conditions. The joint moment and joint power for the countermovement and hopping conditions were larger than those in the squat condition. This was speculated to be due to the extra power that could be generated by the pre-stretch of muscle in preparation for the propulsion. The hopping condition which had substantially more pre-stretch load in the preparatory eccentric phase produced considerably more power than countermovement condition in the propulsive concentric phase. Furthermore during the hopping a large amount of joint moment and joint power could be produced in a shorter time. Therefore it was deemed that the hopping movement is an effective type of preparatory movement which takes much more advantage of the pre-stretch than any other movement.